ASE G1 Auto Maintenance & Light Repair : Key Topics Exam Questions and Answers Rated A+

ASE G1 Auto Maintenance & Light Repair : Key Topics Exam Questions and Answers Rated A+ What is the purpose of the Official ASE Study Guide? - Answer- To prepare for the ASE Automobile Maintenance and Light Repair (G1) test. What does the Test Specification in the study guide outline? - Answer- It lists the main content covered by the test and the number of questions for each topic. What is the Task List in the ASE study guide? - Answer- A checklist of the technical knowledge and skills required for success on the test. How many total questions are on the G1 test? - Answer- 55 total questions, with 45 being scored. What is the testing time allotted for the G1 test? - Answer- 90 minutes. What percentage of the G1 test covers Engine Systems? - Answer- 16% (9 questions). What is the percentage of the G1 test dedicated to Suspension and Steering? - Answer- 24% (13 questions). What does the G1 Task List help identify? - Answer- Weak areas and helps select learning resources. What feature is available for Spanish-speaking technicians taking the G1 test? - Answer- A side-by-side Spanish/English rendering of questions and answer options. What must a candidate do to achieve ASE certification? - Answer- Successfully complete the test and document relevant work experience. How can students in ASE-Accredited Training Programs earn G1 certification? - Answer- By passing a select list of 8 ASE Automobile entry-level tests without taking the G1 test. What is included in the sample questions section of the study guide? - Answer- Examples of the types of multiple-choice questions used on the ASE test. What is the purpose of the pop-up Spanish/English glossary during ASE tests? - Answer- To assist Spanish-speaking test-takers with terminology. What is the maximum number of questions that can be unscored on the G1 test? - Answer- 10 questions. What is the content area with the highest number of questions on the G1 test? - Answer- Suspension and Steering with 13 questions. What is the focus of the Engine Systems section in the G1 Task List? - Answer- Tasks related to engine assembly, leaks, and maintenance. What should be inspected and replaced according to the Engine Systems tasks? - Answer- Drive belts, hoses, spark plugs, and coolant systems. What is one of the tasks listed under Automatic Transmission/Transaxle? - Answer- Determine fluid type, level, and condition. How many questions are dedicated to Electrical systems in the G1 test? - Answer- 8 questions (15% of the test). What is the focus of the Heating, Ventilation, and Air Conditioning section? - Answer- Tasks related to HVAC system maintenance and repair. What is the recommended action for abnormal engine noises? - Answer- Inspect the engine assembly for issues. What is the task related to the cooling system in the Engine Systems section? - Answer- Inspect and test the radiator, heater core, and perform pressure tests. What should be done to the engine oil and filter according to the G1 Task List? - Answer- Change the engine oil and filter; reset the oil life monitor. What is one of the tasks for Manual Drive Train and Axles? - Answer- Inspect and replace power train mounts. What is the importance of the ASE certification process? - Answer- It validates the skills and knowledge of automotive service professionals. What is the procedure for handling diagnostic trouble codes (DTCs) in the G1 test? - Answer- Retrieve and record DTCs during vehicle testing. What is the recommended action for inspecting the exhaust system? - Answer- Check for leaks and inspect hangers, brackets, and heat shields. What is the significance of the ASE study guide for test preparation? - Answer- It provides essential information and resources for effective study. What should be inspected, serviced, and replaced regarding drive shafts? - Answer- Drive shaft center support bearings. What components should be inspected and serviced in rear wheel drive axles? - Answer- Wheel bearings, seals, and hubs, excluding press-type bearings. What is the first step in identifying fluid leakage problems in rear wheel drive axles? - Answer- Identify fluid leakage problems. What should be done to the transfer case fluid in four-wheel/all-wheel drive systems? - Answer- Check fluid level and inspect condition; drain and refill with fluid. What should be inspected and replaced in the front drive axle? - Answer- Universal/CV joints, drive/half shafts, axle seals, and vents. What is the purpose of retrieving and recording diagnostic trouble codes (DTCs)? - Answer- To identify issues within the vehicle's systems. What should be done before inspecting the power steering system? - Answer- Check power steering fluid level and determine fluid type. What components should be inspected and replaced in the power steering system? - Answer- Power steering pump, hoses, fittings, O-rings, coolers, and filters. What should be done to the airbag (SRS) system before working on suspension and steering? - Answer- Disarm the airbag (SRS) system. What should be inspected in the front suspension system? - Answer- Upper and lower control arms, bushings, shafts, and ball joints. What is the purpose of performing a pre-alignment inspection? - Answer- To prepare the vehicle for alignment and perform initial wheel alignment measurements. What should be checked regarding tires during maintenance? - Answer- Tire condition, tread depth, size, and application (load and speed ratings). What should be done if there are symptoms of poor stopping or dragging in brakes? - Answer- Check for poor stopping, pulling, dragging, noises, high or low pedal, and hard or spongy pedal. What should be done to the hydraulic brake system? - Answer- Bleed and/or flush the hydraulic system. What components should be inspected and replaced in drum brakes? - Answer- Brake shoes/linings, springs, pins, self-adjusters, levers, clips, and wheel cylinders.