COHESITY CERTIFIED INSTALLATION
PROFESSIONAL (CCIP) PRACTICE EXAM
(2026 EDITION) | REAL EXAM-STYLE
QUESTIONS WITH VERIFIED ANSWERS &
DETAILED RATIONALES | DATA CLOUD
INSTALLATION & CONFIGURATION SUCCESS
GUIDE | FREE PDF
• This practice guide features 200 real exam-style CCIP questions with verified
correct answers and detailed EXPERT RATIONALE — covering every tested domain
to give you full exam readiness.
• Study by attempting each question independently before revealing the answer,
then use the EXPERT RATIONALE to reinforce understanding and revisit any weak
areas until mastery is achieved.
COHESITY CERTIFIED INSTALLATION PROFESSIONAL (CCIP)
PRACTICE EXAM — 2026 EDITION
200 QUESTIONS | VERIFIED ANSWERS | DETAILED EXPERT RATIONALE
1. What is the minimum number of nodes required to form a Cohesity cluster?
A) 1
B) 2
C) 3
D) 4
E) 6
Correct Answer: C) 3
EXPERT RATIONALE: Cohesity requires a minimum of 3 nodes to establish a
cluster. This ensures quorum-based fault tolerance using a consensus mechanism,
,allowing the cluster to remain operational even when one node fails, as at least 2
out of 3 nodes must agree for operations to proceed.
2. Which Cohesity node series is specifically designed for high-capacity, cold-
storage workloads?
A) C2000
B) C3000
C) C4000
D) C6000
E) C8000
Correct Answer: D) C6000
EXPERT RATIONALE: The Cohesity C6000 series is designed for high-density,
capacity-optimized workloads, offering large amounts of spinning disk storage. It is
ideal for long-term retention, archiving, and cold-data scenarios where maximum
storage density is required at a lower cost per terabyte.
3. What is the purpose of the IPMI interface on a Cohesity node?
A) To provide NFS file access to clients
B) To connect the node to the management VLAN
C) To enable out-of-band management independent of the OS
D) To bond multiple NICs for increased throughput
E) To configure the cluster virtual IP address
Correct Answer: C) To enable out-of-band management independent of the
OS
EXPERT RATIONALE: IPMI (Intelligent Platform Management Interface) provides
out-of-band, hardware-level management of a node. This allows administrators to
,power cycle, access the console, and perform diagnostics even when the operating
system is unresponsive or offline, which is critical for hardware troubleshooting.
4. What type of storage does Cohesity use as its performance tier?
A) SATA HDD
B) SAS HDD
C) NL-SAS
D) SSD (Solid State Drive)
E) Tape
Correct Answer: D) SSD (Solid State Drive)
EXPERT RATIONALE: Cohesity uses SSDs as the performance tier to handle random
I/O workloads efficiently. Data is initially written to the SSD tier for fast ingestion
and is later tiered down to the HDD capacity tier based on access patterns and
SmartTier policies, ensuring optimal performance and cost balance.
5. What does Cohesity's SmartTier feature do?
A) Replicates data to a remote cluster automatically
B) Automatically moves data between SSD and HDD tiers based on access patterns
C) Encrypts data at rest using AES-256
D) Compresses data before writing it to disk
E) Provides instant mount capability for VMs
Correct Answer: B) Automatically moves data between SSD and HDD tiers
based on access patterns
EXPERT RATIONALE: SmartTier intelligently and automatically migrates data
between the performance (SSD) and capacity (HDD) tiers based on data
, temperature — hot data stays on SSDs while cold, infrequently accessed data is
tiered down to HDDs. This optimizes both performance and storage cost.
6. Which of the following best describes a Cohesity Virtual Edition (VE) node?
A) A physical appliance with integrated SSDs and HDDs
B) A software-only node that runs as a VM on a hypervisor
C) A cloud-native node deployed on AWS
D) A read-only replica node for disaster recovery
E) A gateway appliance for NAS access
Correct Answer: B) A software-only node that runs as a VM on a hypervisor
EXPERT RATIONALE: Cohesity Virtual Edition (VE) nodes are software-defined
instances deployed as virtual machines on supported hypervisors such as VMware
ESXi. They enable organizations to leverage existing server infrastructure to
participate in a Cohesity cluster without requiring dedicated physical hardware.
7. What is the maximum number of nodes supported in a single Cohesity
cluster?
A) 8
B) 16
C) 32
D) 48
E) 96
Correct Answer: E) 96
EXPERT RATIONALE: A single Cohesity cluster can scale up to 96 nodes, making it
suitable for very large enterprise environments. This scalability allows organizations
PROFESSIONAL (CCIP) PRACTICE EXAM
(2026 EDITION) | REAL EXAM-STYLE
QUESTIONS WITH VERIFIED ANSWERS &
DETAILED RATIONALES | DATA CLOUD
INSTALLATION & CONFIGURATION SUCCESS
GUIDE | FREE PDF
• This practice guide features 200 real exam-style CCIP questions with verified
correct answers and detailed EXPERT RATIONALE — covering every tested domain
to give you full exam readiness.
• Study by attempting each question independently before revealing the answer,
then use the EXPERT RATIONALE to reinforce understanding and revisit any weak
areas until mastery is achieved.
COHESITY CERTIFIED INSTALLATION PROFESSIONAL (CCIP)
PRACTICE EXAM — 2026 EDITION
200 QUESTIONS | VERIFIED ANSWERS | DETAILED EXPERT RATIONALE
1. What is the minimum number of nodes required to form a Cohesity cluster?
A) 1
B) 2
C) 3
D) 4
E) 6
Correct Answer: C) 3
EXPERT RATIONALE: Cohesity requires a minimum of 3 nodes to establish a
cluster. This ensures quorum-based fault tolerance using a consensus mechanism,
,allowing the cluster to remain operational even when one node fails, as at least 2
out of 3 nodes must agree for operations to proceed.
2. Which Cohesity node series is specifically designed for high-capacity, cold-
storage workloads?
A) C2000
B) C3000
C) C4000
D) C6000
E) C8000
Correct Answer: D) C6000
EXPERT RATIONALE: The Cohesity C6000 series is designed for high-density,
capacity-optimized workloads, offering large amounts of spinning disk storage. It is
ideal for long-term retention, archiving, and cold-data scenarios where maximum
storage density is required at a lower cost per terabyte.
3. What is the purpose of the IPMI interface on a Cohesity node?
A) To provide NFS file access to clients
B) To connect the node to the management VLAN
C) To enable out-of-band management independent of the OS
D) To bond multiple NICs for increased throughput
E) To configure the cluster virtual IP address
Correct Answer: C) To enable out-of-band management independent of the
OS
EXPERT RATIONALE: IPMI (Intelligent Platform Management Interface) provides
out-of-band, hardware-level management of a node. This allows administrators to
,power cycle, access the console, and perform diagnostics even when the operating
system is unresponsive or offline, which is critical for hardware troubleshooting.
4. What type of storage does Cohesity use as its performance tier?
A) SATA HDD
B) SAS HDD
C) NL-SAS
D) SSD (Solid State Drive)
E) Tape
Correct Answer: D) SSD (Solid State Drive)
EXPERT RATIONALE: Cohesity uses SSDs as the performance tier to handle random
I/O workloads efficiently. Data is initially written to the SSD tier for fast ingestion
and is later tiered down to the HDD capacity tier based on access patterns and
SmartTier policies, ensuring optimal performance and cost balance.
5. What does Cohesity's SmartTier feature do?
A) Replicates data to a remote cluster automatically
B) Automatically moves data between SSD and HDD tiers based on access patterns
C) Encrypts data at rest using AES-256
D) Compresses data before writing it to disk
E) Provides instant mount capability for VMs
Correct Answer: B) Automatically moves data between SSD and HDD tiers
based on access patterns
EXPERT RATIONALE: SmartTier intelligently and automatically migrates data
between the performance (SSD) and capacity (HDD) tiers based on data
, temperature — hot data stays on SSDs while cold, infrequently accessed data is
tiered down to HDDs. This optimizes both performance and storage cost.
6. Which of the following best describes a Cohesity Virtual Edition (VE) node?
A) A physical appliance with integrated SSDs and HDDs
B) A software-only node that runs as a VM on a hypervisor
C) A cloud-native node deployed on AWS
D) A read-only replica node for disaster recovery
E) A gateway appliance for NAS access
Correct Answer: B) A software-only node that runs as a VM on a hypervisor
EXPERT RATIONALE: Cohesity Virtual Edition (VE) nodes are software-defined
instances deployed as virtual machines on supported hypervisors such as VMware
ESXi. They enable organizations to leverage existing server infrastructure to
participate in a Cohesity cluster without requiring dedicated physical hardware.
7. What is the maximum number of nodes supported in a single Cohesity
cluster?
A) 8
B) 16
C) 32
D) 48
E) 96
Correct Answer: E) 96
EXPERT RATIONALE: A single Cohesity cluster can scale up to 96 nodes, making it
suitable for very large enterprise environments. This scalability allows organizations
