RIGGING TEST QUESTIONS WITH CORRECT ANSWERS
2025/2026.
operator -ANSWER-a signal person must be provided when the point of operation, meaning
the load travel or the area near or at load placement is not in full view of the:
dedicated spotter -ANSWER-when the equipment is travelling and the view in the direction
of travel is obstructed, a ____________ must be provided
notify the crane who the signal is for -ANSWER-For each signal, prior to giving the
function/direction, the signal person must:
signal person, operator, lift director -ANSWER-When non-standard signals are used, the
following people must contact each other prior to the lift operation and agree upon the non-
standard signals which are going to be used:
distance, function, direction -ANSWER-which of the following are the three required
elements of a voice signal?
as many as are required per the lift plan -ANSWER-How many persons may share a
dedicated channel for the purpose of coordinating operations?
proximity alarms -ANSWER-which of the following are set to give the operator sufficient
warning to prevent encroachment of power lines?
effective, clear, and reliable -ANSWER-when using electronic transmission devices, the
transmitted signal must be:
blocks installed at contact points -ANSWER-to ensure that correct sling angles are
maintained during choker hitch use, the sling may have:
, jaw and weldless eye -ANSWER-A turnbuckle to be used in hoisting or rigging operations
should be of what type construction?
turnbuckle -ANSWER-the attached drawing illustrates a device for adjustment of load and is
termed a:
find the center of gravity -ANSWER-when lifting an object that is of irregular shape, you must
always:
the operator and signal person -ANSWER-who is allowed to design a new signal system?
site conditions preclude the use of hand, voice, or audio systems -ANSWER-en an a new
signal system be used?
the operator, signal person, and lift director -ANSWER-who determines if a new signal
system is suitable?
the new signal system is at least equally effective communication as the standard system
being replaced -ANSWER-what must be demonstrated prior to the use of a new signal
system?
tower -ANSWER-some manufactures of carrier-mounted lattice boom cranes offer optional
_________ attachments for their machines
bridge -ANSWER-the ___________ is the main structural member of an over head crane
used to span the width of the runway area
hoist -ANSWER-any overhead crane consists of three basic units; the bridge, trolley, and:
crawler -ANSWER-carrier-mounted lattice boom cranes are also commonly referred to as
__________ cranes.
2025/2026.
operator -ANSWER-a signal person must be provided when the point of operation, meaning
the load travel or the area near or at load placement is not in full view of the:
dedicated spotter -ANSWER-when the equipment is travelling and the view in the direction
of travel is obstructed, a ____________ must be provided
notify the crane who the signal is for -ANSWER-For each signal, prior to giving the
function/direction, the signal person must:
signal person, operator, lift director -ANSWER-When non-standard signals are used, the
following people must contact each other prior to the lift operation and agree upon the non-
standard signals which are going to be used:
distance, function, direction -ANSWER-which of the following are the three required
elements of a voice signal?
as many as are required per the lift plan -ANSWER-How many persons may share a
dedicated channel for the purpose of coordinating operations?
proximity alarms -ANSWER-which of the following are set to give the operator sufficient
warning to prevent encroachment of power lines?
effective, clear, and reliable -ANSWER-when using electronic transmission devices, the
transmitted signal must be:
blocks installed at contact points -ANSWER-to ensure that correct sling angles are
maintained during choker hitch use, the sling may have:
, jaw and weldless eye -ANSWER-A turnbuckle to be used in hoisting or rigging operations
should be of what type construction?
turnbuckle -ANSWER-the attached drawing illustrates a device for adjustment of load and is
termed a:
find the center of gravity -ANSWER-when lifting an object that is of irregular shape, you must
always:
the operator and signal person -ANSWER-who is allowed to design a new signal system?
site conditions preclude the use of hand, voice, or audio systems -ANSWER-en an a new
signal system be used?
the operator, signal person, and lift director -ANSWER-who determines if a new signal
system is suitable?
the new signal system is at least equally effective communication as the standard system
being replaced -ANSWER-what must be demonstrated prior to the use of a new signal
system?
tower -ANSWER-some manufactures of carrier-mounted lattice boom cranes offer optional
_________ attachments for their machines
bridge -ANSWER-the ___________ is the main structural member of an over head crane
used to span the width of the runway area
hoist -ANSWER-any overhead crane consists of three basic units; the bridge, trolley, and:
crawler -ANSWER-carrier-mounted lattice boom cranes are also commonly referred to as
__________ cranes.
