1|Page
Texas Safety Inspection Final EXAM ||VERIFIED
EXAM!!|| MOST RECENT EXAM ACTUAL COMPLETE
REAL EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! NEWEST EXAM!!!
What model year did the emission system begin to be
installed by manufacturers? - Answer-1968
Which percentage of light transmission would fail a tint
inspection? - Answer-20%
Which windows on the vehicle should have the tint
inspected? - Answer-The front windshield and the
windows to the right and left of the driver
What is the minimum tire tread depth that is acceptable? -
Answer-2/32 of an inch
True or False: You must issue a rejection of the inspection
if the wheel studs, bolts, nuts, or lugs are loose, missing,
or damaged. - Answer-True
,2|Page
What vehicles are exempt from the gas cap test? -
Answer-Motorcycles
True or False: The exhaust system can be patched as
long as no fumes are leaking from the system. - Answer-
False
What model year vehicles (and newer) is the catalytic
converter considered part of the exhaust system? -
Answer-1984
What clearance lights are necessary on vehicles 80" or
more in overall width? - Answer-2 amber lights in front,
and 2 red lights in rear
What color must the license plate lamp be? - Answer-
White
True or False: All vehicles must have at least 1 rear
reflector that is red in color and placed at a height of
between 15 inches and 60 inches. - Answer-False
,3|Page
What model year vehicles require a center high-mounted
stop light? - Answer-1986 and newer (passenger vehicles)
and 1994 and newer (multipurpose vehicles, trucks, and
buses)
What is the height requirement for stop lights? - Answer-
Not more than 72" or less than 15"
True or False: The stop lights on the vehicle must be red
or amber in color. - Answer-True
What model year vehicle is one stop light required on? -
Answer-1959 and older
What model year vehicle are two stop lights required on? -
Answer-1960 and newer
True or False: The tail lights can have the appearance of
blue dots. - Answer-False
What model year vehicle is one tail light required on? -
Answer-1959 and older
, 4|Page
What model year vehicle are two tail lights required on? -
Answer-1960 and newer
What color must the turn signal lights be in the rear? -
Answer-Red
What model year vehicle (and newer) must be equipped
with turn signal lights? - Answer-1960
Which of the following reasons will result in a rejection of
the inspection in regards to the head lights? - Answer-
Light is mounted on vehicle more than 54" or less than 24"
True or False: Every vehicle must be equipped with at
least two head lamps. - Answer-True
What model year vehicle (and newer) must be equipped
with a high beam indicator that lights whenever the
uppermost distribution of light from the head lights is in
use. - Answer-1948
Texas Safety Inspection Final EXAM ||VERIFIED
EXAM!!|| MOST RECENT EXAM ACTUAL COMPLETE
REAL EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! NEWEST EXAM!!!
What model year did the emission system begin to be
installed by manufacturers? - Answer-1968
Which percentage of light transmission would fail a tint
inspection? - Answer-20%
Which windows on the vehicle should have the tint
inspected? - Answer-The front windshield and the
windows to the right and left of the driver
What is the minimum tire tread depth that is acceptable? -
Answer-2/32 of an inch
True or False: You must issue a rejection of the inspection
if the wheel studs, bolts, nuts, or lugs are loose, missing,
or damaged. - Answer-True
,2|Page
What vehicles are exempt from the gas cap test? -
Answer-Motorcycles
True or False: The exhaust system can be patched as
long as no fumes are leaking from the system. - Answer-
False
What model year vehicles (and newer) is the catalytic
converter considered part of the exhaust system? -
Answer-1984
What clearance lights are necessary on vehicles 80" or
more in overall width? - Answer-2 amber lights in front,
and 2 red lights in rear
What color must the license plate lamp be? - Answer-
White
True or False: All vehicles must have at least 1 rear
reflector that is red in color and placed at a height of
between 15 inches and 60 inches. - Answer-False
,3|Page
What model year vehicles require a center high-mounted
stop light? - Answer-1986 and newer (passenger vehicles)
and 1994 and newer (multipurpose vehicles, trucks, and
buses)
What is the height requirement for stop lights? - Answer-
Not more than 72" or less than 15"
True or False: The stop lights on the vehicle must be red
or amber in color. - Answer-True
What model year vehicle is one stop light required on? -
Answer-1959 and older
What model year vehicle are two stop lights required on? -
Answer-1960 and newer
True or False: The tail lights can have the appearance of
blue dots. - Answer-False
What model year vehicle is one tail light required on? -
Answer-1959 and older
, 4|Page
What model year vehicle are two tail lights required on? -
Answer-1960 and newer
What color must the turn signal lights be in the rear? -
Answer-Red
What model year vehicle (and newer) must be equipped
with turn signal lights? - Answer-1960
Which of the following reasons will result in a rejection of
the inspection in regards to the head lights? - Answer-
Light is mounted on vehicle more than 54" or less than 24"
True or False: Every vehicle must be equipped with at
least two head lamps. - Answer-True
What model year vehicle (and newer) must be equipped
with a high beam indicator that lights whenever the
uppermost distribution of light from the head lights is in
use. - Answer-1948
