FDNY G60 EXAM NEWEST 2026 ACTUAL EXAM COMPLETE 100+ QUESTIONS
AND CORRECT DETAILED ANSWERS (VERIFIED) NEWEST UPDATE!!
Question 1
Who is required to hold a Certificate of Fitness when oxygen-fuel torch operations are being
conducted?
A) Only the site supervisor
B) The torch operator and the fire guard
C) Only the owner of the building
D) Any worker standing within 50 feet
E) Only the person who purchased the fuel
Correct Answer: B) The torch operator and the fire guard
Rationale: According to FDNY regulations, all torch operators using any amount of oxygen
and flammable gas, as well as fire guards responsible for hot work, must possess a current
Certificate of Fitness to ensure they are qualified to handle the hazards involved.
Question 2
What is the primary responsibility of a Certificate of Fitness holder regarding gas flow?
A) They must ensure the gas smells like rotten eggs.
B) They must regulate the pressure and flow of oxygen and fuel gas to each torch.
C) They are responsible for cleaning the torch tips only.
D) They must change the cylinders every hour regardless of use.
E) They must keep the valves open at all times during their shift.
Correct Answer: B) They must regulate the pressure and flow of oxygen and fuel gas to each
torch.
Rationale: Safety depends on the correct mixture and pressure of gases. The C of F holder is
specifically trained to manage these settings to prevent accidents like backfire or
flashbacks.
Question 3
Where must a Certificate of Fitness holder keep their certificate while performing torch
operations?
A) Locked in a site-specific safe
B) In their vehicle parked outside
C) At the main headquarters of their company
D) On their person or otherwise readily available for inspection
E) Digitally on a private cloud server only
Correct Answer: D) On their person or otherwise readily available for inspection
Rationale: FDNY representatives must be able to verify qualifications instantly. Keeping the
certificate on one's person ensures compliance with fire code inspections.
Question 4
If a leak is discovered in a gas cylinder or hose, what is the easiest and most immediate way to
, 2
extinguish a resulting fire?
A) Throwing sand on the flame
B) Using a wet blanket
C) Closing the shutoff valve
D) Blowing on the flame until it goes out
E) Running to the nearest exit immediately
Correct Answer: C) Closing the shutoff valve
Rationale: A gas fire is fueled by the escaping gas. By closing the shutoff valve, you remove
the fuel source, which is the most effective way to stop the fire at its origin.
Question 5
An FDNY permit is required for storing, using, or handling any oxidizing gas (such as oxygen)
in excess of how many Standard Cubic Feet (SCF)?
A) 100 SCF
B) 400 SCF
C) 504 SCF
D) 8.7 SCF
E) 1000 SCF
Correct Answer: C) 504 SCF
Rationale: FDNY regulations set specific thresholds for the storage of gases. For oxidizing
gases like oxygen, a permit is required once the quantity exceeds 504 SCF.
Question 6
For LPG (Liquefied Petroleum Gas), 400 SCF is approximately equivalent to how many pounds?
A) 10 lbs
B) 20 lbs
C) 47 lbs
D) 100 lbs
E) 33.5 lbs
Correct Answer: C) 47 lbs
Rationale: The fire code uses SCF for volume measurements, but LPG is often sold by
weight. 400 SCF is the threshold for a permit, which translates to roughly 47 lbs of LPG.
Question 7
How many 20 lb LPG containers can be handled without requiring a permit?
A) 1 container
B) 2 containers
C) 3 containers
D) 5 containers
E) 10 containers
Correct Answer: B) 2 containers
, 3
Rationale: A permit is required for LPG when you have 3 or more 20 lb containers.
Therefore, you can handle up to 2 containers without a permit.
Question 8
Which of the following occupancies generally prohibits the indoor storage of portable LPG
containers larger than 16.4 oz?
A) Open construction sites
B) Residential and educational occupancies
C) Scrap metal yards
D) Outdoor parking lots
E) Rooftops of commercial buildings
Correct Answer: B) Residential and educational occupancies
Rationale: Due to high density and the vulnerability of occupants, portable LPG containers
over 16.4 oz and CNG containers over 8.7 SCF are prohibited indoors in residential,
educational, factory, and institutional occupancies.
Question 9
How long is a permanent site-specific permit valid for?
A) 30 days
B) 6 months
C) 12 months
D) 2 years
E) 48 hours
Correct Answer: C) 12 months
Rationale: While temporary permits vary in length, a permanent site-specific permit is
issued for a duration of 12 months only and must be renewed annually.
Question 10
A city-wide permit for hot work is valid for up to how many days at a specific location?
A) 1 day
B) 15 days
C) 30 days
D) 60 days
E) 12 months
Correct Answer: C) 30 days
Rationale: City-wide permits allow a contractor to move from site to site, but they are
limited to a maximum of 30 days at any single location before a site-specific permit is
required.
Question 11
For how long must a hot work authorization be available for inspection after the work is
AND CORRECT DETAILED ANSWERS (VERIFIED) NEWEST UPDATE!!
Question 1
Who is required to hold a Certificate of Fitness when oxygen-fuel torch operations are being
conducted?
A) Only the site supervisor
B) The torch operator and the fire guard
C) Only the owner of the building
D) Any worker standing within 50 feet
E) Only the person who purchased the fuel
Correct Answer: B) The torch operator and the fire guard
Rationale: According to FDNY regulations, all torch operators using any amount of oxygen
and flammable gas, as well as fire guards responsible for hot work, must possess a current
Certificate of Fitness to ensure they are qualified to handle the hazards involved.
Question 2
What is the primary responsibility of a Certificate of Fitness holder regarding gas flow?
A) They must ensure the gas smells like rotten eggs.
B) They must regulate the pressure and flow of oxygen and fuel gas to each torch.
C) They are responsible for cleaning the torch tips only.
D) They must change the cylinders every hour regardless of use.
E) They must keep the valves open at all times during their shift.
Correct Answer: B) They must regulate the pressure and flow of oxygen and fuel gas to each
torch.
Rationale: Safety depends on the correct mixture and pressure of gases. The C of F holder is
specifically trained to manage these settings to prevent accidents like backfire or
flashbacks.
Question 3
Where must a Certificate of Fitness holder keep their certificate while performing torch
operations?
A) Locked in a site-specific safe
B) In their vehicle parked outside
C) At the main headquarters of their company
D) On their person or otherwise readily available for inspection
E) Digitally on a private cloud server only
Correct Answer: D) On their person or otherwise readily available for inspection
Rationale: FDNY representatives must be able to verify qualifications instantly. Keeping the
certificate on one's person ensures compliance with fire code inspections.
Question 4
If a leak is discovered in a gas cylinder or hose, what is the easiest and most immediate way to
, 2
extinguish a resulting fire?
A) Throwing sand on the flame
B) Using a wet blanket
C) Closing the shutoff valve
D) Blowing on the flame until it goes out
E) Running to the nearest exit immediately
Correct Answer: C) Closing the shutoff valve
Rationale: A gas fire is fueled by the escaping gas. By closing the shutoff valve, you remove
the fuel source, which is the most effective way to stop the fire at its origin.
Question 5
An FDNY permit is required for storing, using, or handling any oxidizing gas (such as oxygen)
in excess of how many Standard Cubic Feet (SCF)?
A) 100 SCF
B) 400 SCF
C) 504 SCF
D) 8.7 SCF
E) 1000 SCF
Correct Answer: C) 504 SCF
Rationale: FDNY regulations set specific thresholds for the storage of gases. For oxidizing
gases like oxygen, a permit is required once the quantity exceeds 504 SCF.
Question 6
For LPG (Liquefied Petroleum Gas), 400 SCF is approximately equivalent to how many pounds?
A) 10 lbs
B) 20 lbs
C) 47 lbs
D) 100 lbs
E) 33.5 lbs
Correct Answer: C) 47 lbs
Rationale: The fire code uses SCF for volume measurements, but LPG is often sold by
weight. 400 SCF is the threshold for a permit, which translates to roughly 47 lbs of LPG.
Question 7
How many 20 lb LPG containers can be handled without requiring a permit?
A) 1 container
B) 2 containers
C) 3 containers
D) 5 containers
E) 10 containers
Correct Answer: B) 2 containers
, 3
Rationale: A permit is required for LPG when you have 3 or more 20 lb containers.
Therefore, you can handle up to 2 containers without a permit.
Question 8
Which of the following occupancies generally prohibits the indoor storage of portable LPG
containers larger than 16.4 oz?
A) Open construction sites
B) Residential and educational occupancies
C) Scrap metal yards
D) Outdoor parking lots
E) Rooftops of commercial buildings
Correct Answer: B) Residential and educational occupancies
Rationale: Due to high density and the vulnerability of occupants, portable LPG containers
over 16.4 oz and CNG containers over 8.7 SCF are prohibited indoors in residential,
educational, factory, and institutional occupancies.
Question 9
How long is a permanent site-specific permit valid for?
A) 30 days
B) 6 months
C) 12 months
D) 2 years
E) 48 hours
Correct Answer: C) 12 months
Rationale: While temporary permits vary in length, a permanent site-specific permit is
issued for a duration of 12 months only and must be renewed annually.
Question 10
A city-wide permit for hot work is valid for up to how many days at a specific location?
A) 1 day
B) 15 days
C) 30 days
D) 60 days
E) 12 months
Correct Answer: C) 30 days
Rationale: City-wide permits allow a contractor to move from site to site, but they are
limited to a maximum of 30 days at any single location before a site-specific permit is
required.
Question 11
For how long must a hot work authorization be available for inspection after the work is
