NEWEST!!! COMPLETE ACTUAL EXAM QUESTIONS AND 100%
CORRECT ANSWERS (VERIFIED ANSWERS) AND STUDY
GUIDE /ALREADY GRADED A+.
when activating dynamic transport mode, pro tools will automatically
disable ________________________________________________________________ and
enable ____
ANSWERS: link timeline and edit selection, loop playback mode
quickpunch and track punch each allow running punches per pass
ANSWERS: 200
when using quick punch, in the transport window is not available
loop playback
____ mode allows you to punch in and out on different track independently
ANSWERS: trackpunch
when using auto input mode, you will hear on record enabled tracks
during
recording and while transport is stopped. however, during playback you will
hear_____
ANSWERS: live inputs, previously recorded material
,a ___ is the arrangement of clip (audio or MIDI) on a track
ANSWERS: playlist
CC data is recorded into clips on MIDI tracks and instrument tracks along with any
other existing MIDI data. for this reason, you should be sure that is enabled
before recording CC data
ANSWERS: MIDI merge
CC data cannot be recorded by moving a virtual instrument control with a mouse,
you must use a _____
ANSWERS: MIDI controller
when routing multi-track audio out from a virtual instrument plug in such as
structure or strike, you assign of the new audio track to receive the output of the
plug in
ANSWERS: input
, the "automatically create new playlist when loop recording"
preference can be found under the tab in the preference window
ANSWERS: operation
whether you are loop recording or recording one take at a time,
your ___ will end up on the main playlist
ANSWERS: last take
T or F - pressing the solo button of a playlist will solo the whole track
ANSWERS: false
to rate a clip (either during or after recording), hold_____
ANSWERS: control+option+command+choose # on numeric key pad
when filtering playlist lanes, choose "show only lanes with clips rated
>=3" would show clips rated with a ___, ___, or ___
ANSWERS: 3,4,5
the CC in MIDI CC stands for
ANSWERS: continuous controller