NJ Lead Inspector/Risk Assessor Exam (12/2026) Latest
Update 2026 | Exam Prep | 100% Accurate Answers
1. Describe the purpose of the written compliance plan required by OSHA for
lead exposure in construction environments.
The written compliance plan is a document for reporting accidents
only.
The written compliance plan is used to train workers on lead paint
removal techniques.
The written compliance plan serves as a financial budget for lead
abatement projects.
The written compliance plan outlines the procedures and measures
to control lead exposure and ensure worker safety.
2. If a lead abatement project in Wisconsin is found to be non-compliant with
DHS 163 certification requirements, what actions should the supervisor take?
Ignore the non-compliance and continue with the project.
Implement corrective measures and report the non-compliance to
the relevant authorities.
Terminate the project without further action.
Only inform the workers on site about the non-compliance.
3. Describe how lead can enter residential environments and the implications
for health.
Lead is primarily found in modern appliances and does not pose a risk
in homes.
Lead can enter residential environments through sources like lead-
based paint, which can deteriorate and create dust or chips that are
, harmful if ingested or inhaled.
Lead is commonly found in garden soil and has no health implications.
Lead exposure is only a concern in industrial settings and not in
residential areas.
4. What organization sets the training requirements for lead-abatement
workers?
EPA
CDC
NIOSH
OSHA
5. Describe the significance of the Wisconsin Lead-Safe Renovation Rule in
relation to lead exposure risks.
The Wisconsin Lead-Safe Renovation Rule eliminates the need for
personal protective equipment.
The Wisconsin Lead-Safe Renovation Rule is focused solely on lead
testing methods.
The Wisconsin Lead-Safe Renovation Rule only applies to commercial
buildings.
The Wisconsin Lead-Safe Renovation Rule is significant because it
establishes training and certification requirements to minimize lead
exposure during renovation activities.
6. Who is responsible for overseeing lead abatement activities and developing
occupant protection plans?
Environmental scientist
, Certified lead abatement supervisor or project designer
General contractor
Homeowner
7. What is the primary regulation that outlines respirator protection standards
for lead-abatement work?
OSHA 1926.62
29 CFR 1910.134
EPA 40 CFR Part 745
Wisconsin Act 101
8. What are the HUD and EPA post-abatement clearance standards for lead in
dust on floors?
200 µg/sq. ft.
10 µg/sq. ft.
40 µg/sq. ft.
100 µg/sq. ft.
9. Describe the role of certified personnel in lead hazard reduction activities.
Certified personnel are responsible for overseeing lead abatement,
developing protection plans, and ensuring compliance with
regulations.
Certified personnel are responsible for educating homeowners about
lead hazards.
Certified personnel only conduct lead testing and do not oversee
abatement.
, Certified personnel only write reports without any on-site
responsibilities.
10. What does the Wisconsin DHS 163 define as lead-based paint (LBP)?
Paint that contains lead in excess of 500 parts per million (ppm).
Paint that contains lead in excess of 1,000 parts per million (ppm).
Paint that contains lead in excess of 2,000 parts per million (ppm).
Paint that contains no lead whatsoever.
11. If a construction company in Wisconsin is planning to dispose of lead paint
debris, which agency's regulations must they comply with?
Wisconsin Department of Health Services
Wisconsin Department of Transportation
Wisconsin Department of Natural Resources
U.S. Environmental Protection Agency
12. What OSHA standard covers the construction industry?
29 CFR Part 1921
29 CFR Part 1949
29 CFR Part 1926
29 CFR, Part 1917
13. Explain the differences between removal, enclosure, and encapsulation
methods for lead hazard reduction.
Encapsulation is only used for surfaces that are not accessible.
Enclosure is the most effective method, while removal is rarely used.
Update 2026 | Exam Prep | 100% Accurate Answers
1. Describe the purpose of the written compliance plan required by OSHA for
lead exposure in construction environments.
The written compliance plan is a document for reporting accidents
only.
The written compliance plan is used to train workers on lead paint
removal techniques.
The written compliance plan serves as a financial budget for lead
abatement projects.
The written compliance plan outlines the procedures and measures
to control lead exposure and ensure worker safety.
2. If a lead abatement project in Wisconsin is found to be non-compliant with
DHS 163 certification requirements, what actions should the supervisor take?
Ignore the non-compliance and continue with the project.
Implement corrective measures and report the non-compliance to
the relevant authorities.
Terminate the project without further action.
Only inform the workers on site about the non-compliance.
3. Describe how lead can enter residential environments and the implications
for health.
Lead is primarily found in modern appliances and does not pose a risk
in homes.
Lead can enter residential environments through sources like lead-
based paint, which can deteriorate and create dust or chips that are
, harmful if ingested or inhaled.
Lead is commonly found in garden soil and has no health implications.
Lead exposure is only a concern in industrial settings and not in
residential areas.
4. What organization sets the training requirements for lead-abatement
workers?
EPA
CDC
NIOSH
OSHA
5. Describe the significance of the Wisconsin Lead-Safe Renovation Rule in
relation to lead exposure risks.
The Wisconsin Lead-Safe Renovation Rule eliminates the need for
personal protective equipment.
The Wisconsin Lead-Safe Renovation Rule is focused solely on lead
testing methods.
The Wisconsin Lead-Safe Renovation Rule only applies to commercial
buildings.
The Wisconsin Lead-Safe Renovation Rule is significant because it
establishes training and certification requirements to minimize lead
exposure during renovation activities.
6. Who is responsible for overseeing lead abatement activities and developing
occupant protection plans?
Environmental scientist
, Certified lead abatement supervisor or project designer
General contractor
Homeowner
7. What is the primary regulation that outlines respirator protection standards
for lead-abatement work?
OSHA 1926.62
29 CFR 1910.134
EPA 40 CFR Part 745
Wisconsin Act 101
8. What are the HUD and EPA post-abatement clearance standards for lead in
dust on floors?
200 µg/sq. ft.
10 µg/sq. ft.
40 µg/sq. ft.
100 µg/sq. ft.
9. Describe the role of certified personnel in lead hazard reduction activities.
Certified personnel are responsible for overseeing lead abatement,
developing protection plans, and ensuring compliance with
regulations.
Certified personnel are responsible for educating homeowners about
lead hazards.
Certified personnel only conduct lead testing and do not oversee
abatement.
, Certified personnel only write reports without any on-site
responsibilities.
10. What does the Wisconsin DHS 163 define as lead-based paint (LBP)?
Paint that contains lead in excess of 500 parts per million (ppm).
Paint that contains lead in excess of 1,000 parts per million (ppm).
Paint that contains lead in excess of 2,000 parts per million (ppm).
Paint that contains no lead whatsoever.
11. If a construction company in Wisconsin is planning to dispose of lead paint
debris, which agency's regulations must they comply with?
Wisconsin Department of Health Services
Wisconsin Department of Transportation
Wisconsin Department of Natural Resources
U.S. Environmental Protection Agency
12. What OSHA standard covers the construction industry?
29 CFR Part 1921
29 CFR Part 1949
29 CFR Part 1926
29 CFR, Part 1917
13. Explain the differences between removal, enclosure, and encapsulation
methods for lead hazard reduction.
Encapsulation is only used for surfaces that are not accessible.
Enclosure is the most effective method, while removal is rarely used.
