BMC SERVICEWIDE CERTIFICATION EXAM
PAPER 2026 COMPLETE QUESTIONS AND
ANSWERS ELITE STUDY GUIDE
◉ Vehicles that are made up of two components that are premixed
before use. Answer: Epoxy
◉ Vehicles that are used in paints with sodium, potassium, lithium,
and ethyl silicates. Used in zinc dust pigmented primers and which
they react with the finely divided zinc metal to form hard films.
Answer: Inorganic
◉ Based on water emulsions of three basic types of polymers:
polyvinyl acetate, polyacrylic, and polystyrene-butadiene. Generally
used for interior because of the fast drying?. Answer: latex
◉ The oldest type of coatings in use and have the longest history of
performance. Primarily used on exterior wood, and metal since they
dry too slow for interior use?. Answer: oil
◉ Linseed oil vehicles are often modified with _______ resins in order
to reduce drying time, to improve leveling, hardness, gloss, and gloss
retention and to reduce fading while maintaining brush ability,
adhesion, and flexibility of the oil?. Answer: Alkyd-resins
, ◉ Vehicles that are made by processing a drying oil with a phenolic
resin are thus a class of oleo resinous vehicles. Answer: phenolic
◉ Vehicles that are made by processing drying oils with hard resins
and are generally used as either a spar varnishes or as mixing
vehicles to be added to aluminum paste to produce aluminum
paints. Answer: Oleo resinous
◉ Relatively new coating, that contain a combination of
polyurethane and _______ base ingredient, and have been developed
to achieve some of the application advantages of pure____, but with
the advantage of lower cost polyurethane ingredients.. Answer:
Polyurea
◉ CG members are banned from using two part________?. Answer:
Two-Part Polyureas
◉ Vehicles that are used as a water repellant and for heat resistant
finishes.. Answer: Silicone
◉ Finishes containing a high concentration of silicone resins, when
pigmented with aluminum, have the ability to withstand temps up to
1200 degrees?. Answer: heat resistant
PAPER 2026 COMPLETE QUESTIONS AND
ANSWERS ELITE STUDY GUIDE
◉ Vehicles that are made up of two components that are premixed
before use. Answer: Epoxy
◉ Vehicles that are used in paints with sodium, potassium, lithium,
and ethyl silicates. Used in zinc dust pigmented primers and which
they react with the finely divided zinc metal to form hard films.
Answer: Inorganic
◉ Based on water emulsions of three basic types of polymers:
polyvinyl acetate, polyacrylic, and polystyrene-butadiene. Generally
used for interior because of the fast drying?. Answer: latex
◉ The oldest type of coatings in use and have the longest history of
performance. Primarily used on exterior wood, and metal since they
dry too slow for interior use?. Answer: oil
◉ Linseed oil vehicles are often modified with _______ resins in order
to reduce drying time, to improve leveling, hardness, gloss, and gloss
retention and to reduce fading while maintaining brush ability,
adhesion, and flexibility of the oil?. Answer: Alkyd-resins
, ◉ Vehicles that are made by processing a drying oil with a phenolic
resin are thus a class of oleo resinous vehicles. Answer: phenolic
◉ Vehicles that are made by processing drying oils with hard resins
and are generally used as either a spar varnishes or as mixing
vehicles to be added to aluminum paste to produce aluminum
paints. Answer: Oleo resinous
◉ Relatively new coating, that contain a combination of
polyurethane and _______ base ingredient, and have been developed
to achieve some of the application advantages of pure____, but with
the advantage of lower cost polyurethane ingredients.. Answer:
Polyurea
◉ CG members are banned from using two part________?. Answer:
Two-Part Polyureas
◉ Vehicles that are used as a water repellant and for heat resistant
finishes.. Answer: Silicone
◉ Finishes containing a high concentration of silicone resins, when
pigmented with aluminum, have the ability to withstand temps up to
1200 degrees?. Answer: heat resistant
