BNSF ROADWAY WORKER PROTECTION TEST
2026 FINAL ASSESSMENT PAPER RAILROAD
SAFETY COMPLIANCE COMPREHENSIVE
QUESTIONS AND ANSWERS VERIFIED A+
◉ the employee-in-charge of the Form B must contact the __________
prior to occupying the Form B limits. A job briefing will be
conducted which will include an update of any train or on-track
equipment movements within the limits as well as documenting the
time of occupancy of the Form B. Answer: Train Dispatcher
◉ the term "qualified" as used in connection with Railroad
Workplace Safety, means a status attained by an employee who:
Answer: All of the above
◉ Individual Train Detection (ITD) is a form of ON-Track safety that
can be used only by a: Answer: Lone Worker
◉ Which of the following should be included in a complete Job
Briefing? Answer: All of the above
◉ every roadway worker that depends upon Train Approach
Warning for on-track safety shall maintain a position that will enable
him or her to receive a train approach warning communicated by a
, watchman/lookout at any time while on-track safety is provided by
train approach warning. Answer: True
◉ If there is a safety related issue to be resolved through the access
to the On-track safety manual, then the roadway work group or lone
worker must move to the clear of the track until the issue is
resolved. Answer: true
◉ When not in use, a cell phone must be: Answer: turned off and
stowed out of sight
◉ Yellow-red and Red Flags must be displayed as required in the
operating rules, prior to the Form B being occupied by Roadway
Workers (GCOR rules 5.4.3, 5.4.6 and 5.4.7) Yellow-red flags must be
displayed ______ miles before the restricted area. Answer: 2
◉ Job Briefing must be updated after: Answer: A meal Period.
◉ A Lone Worker who chooses to use individual train detection to
establish on-track safety shall first complete a written Statement of
ON-track Safety. Answer: True
◉ Watchmen may be assigned other job-related duties while
functioning as a watchman. Answer: False
2026 FINAL ASSESSMENT PAPER RAILROAD
SAFETY COMPLIANCE COMPREHENSIVE
QUESTIONS AND ANSWERS VERIFIED A+
◉ the employee-in-charge of the Form B must contact the __________
prior to occupying the Form B limits. A job briefing will be
conducted which will include an update of any train or on-track
equipment movements within the limits as well as documenting the
time of occupancy of the Form B. Answer: Train Dispatcher
◉ the term "qualified" as used in connection with Railroad
Workplace Safety, means a status attained by an employee who:
Answer: All of the above
◉ Individual Train Detection (ITD) is a form of ON-Track safety that
can be used only by a: Answer: Lone Worker
◉ Which of the following should be included in a complete Job
Briefing? Answer: All of the above
◉ every roadway worker that depends upon Train Approach
Warning for on-track safety shall maintain a position that will enable
him or her to receive a train approach warning communicated by a
, watchman/lookout at any time while on-track safety is provided by
train approach warning. Answer: True
◉ If there is a safety related issue to be resolved through the access
to the On-track safety manual, then the roadway work group or lone
worker must move to the clear of the track until the issue is
resolved. Answer: true
◉ When not in use, a cell phone must be: Answer: turned off and
stowed out of sight
◉ Yellow-red and Red Flags must be displayed as required in the
operating rules, prior to the Form B being occupied by Roadway
Workers (GCOR rules 5.4.3, 5.4.6 and 5.4.7) Yellow-red flags must be
displayed ______ miles before the restricted area. Answer: 2
◉ Job Briefing must be updated after: Answer: A meal Period.
◉ A Lone Worker who chooses to use individual train detection to
establish on-track safety shall first complete a written Statement of
ON-track Safety. Answer: True
◉ Watchmen may be assigned other job-related duties while
functioning as a watchman. Answer: False
