GEORGIA CLASS F DRIVERS LICENSE 2025/2026|ACTUAL EXAM SET QUESTIONS AND
VERIFIED ANSWERS (CORRECT SOLUTIONS) | GET IT 100% ACCURATE!!
Question 1
At a speed of 55 mph, approximately how many seconds does it take for a heavy vehicle to come
to a complete stop?
A) 2 seconds
B) 4 seconds
C) 6 seconds
D) 8 seconds
E) 10 seconds
Correct Answer: C) 6 seconds
Rationale: Stopping a heavy vehicle requires significantly more time than a passenger car.
At 55 mph, considering perception, reaction, and braking distance, it takes approximately
6 seconds to stop safely.
Question 2
What is the minimum tread depth required for the front two tires of a heavy vehicle?
A) 1/32"
B) 2/32"
C) 3/32"
D) 4/32"
E) 6/32"
Correct Answer: D) 4/32"
Rationale: Safety regulations require deeper tread on the steering (front) tires to ensure
adequate traction and prevent hydroplaning. The minimum depth is 4/32".
Question 3
What is the maximum allowable play in a 20-inch steering wheel?
A) 1 inch
B) 2 inches
C) 3 inches
D) 4 inches
E) 5 inches
Correct Answer: B) 2"
Rationale: Excessive play makes it difficult to steer accurately. The limit is 10 degrees of
play, which translates to approximately 2 inches on a standard 20-inch steering wheel.
Question 4
What is the minimum tread depth required for all tires except the front two steering tires?
A) 1/32"
B) 2/32"
C) 3/32"
D) 4/32"
, 2
E) 5/32"
Correct Answer: B) 2/32"
Rationale: While front tires require 4/32", the rear and trailer tires are legally required to
have at least 2/32" of tread depth.
Question 5
When performing the initial test for air brake leaks, what is the correct procedure?
A) Pump the brakes until the air pressure reaches 150 PSI
B) Hold the brake down for 5 minutes while the engine is running
C) Pump the brakes 3 times and then hold the brake on the 4th
D) Release the parking brake and watch the gauge for 20 seconds
E) Turn the engine off and pump the brakes 10 times
Correct Answer: C) Pump 3 times and then hold the break on the 4th
Rationale: To check for leaks and ensure the system holds pressure under load, you should
pump the pedal three times to reduce pressure and then hold it on the fourth stroke to
monitor the gauge for movement.
Question 6
Which of the following are the only factors that determine a person's Blood Alcohol
Concentration (BAC)?
A) Type of alcohol and time spent drinking
B) Amount of alcohol and the person's weight
C) Age and height
D) Fitness level and gender
E) Amount of food eaten and altitude
Correct Answer: B) Amount of alcohol and weight
Rationale: While other factors might change how a person feels, BAC is scientifically
calculated based primarily on the amount of alcohol ingested and the volume of blood in
the body (determined by weight).
Question 7
What is the correct formula for calculating the total stopping distance of a heavy vehicle?
A) Speed x Weight + Braking distance
B) Reaction time + Braking distance
C) Perception time + Reaction time + Braking distance
D) Perception time + Reaction distance / 2
E) Deceleration rate + Speed
Correct Answer: C) Perception time + reaction time + braking distance = stopping distance
Rationale: Total stopping distance involves the time it takes to see the hazard (perception),
the time to physically move your foot to the pedal (reaction), and the distance the vehicle
travels once the brakes are applied (braking).
, 3
Question 8
When inspecting the engine compartment, what is the maximum allowable play in any engine
belt?
A) 1/4"
B) 1/2"
C) 3/4"
D) 1 inch
E) 1.5 inches
Correct Answer: C) 3/4"
Rationale: Belts must be tight enough to drive the alternator, water pump, and other
components efficiently. If a belt has more than 3/4" of play, it should be adjusted or
replaced.
Question 9
If your vehicle’s Anti-lock Braking System (ABS) fails while you are driving, what should you
do?
A) Stop immediately on the shoulder
B) Call for a tow truck from the middle of the road
C) Do not stop immediately, but get the system serviced soon
D) Pump the brakes rapidly until the light turns off
E) Turn the engine off and on to reset the computer
Correct Answer: C) Do not stop immediately, service soon
Rationale: The vehicle still has its regular braking capability even if the ABS computer fails.
You do not need to panic or stop immediately, but you should have it fixed as soon as
possible to regain the safety benefits of ABS.
Question 10
Under normal operating conditions at idle, what should the oil pressure gauge read?
A) 0-5 psi
B) 5-20 psi
C) 20-30 psi
D) 40-60 psi
E) 75-100 psi
Correct Answer: B) 5-20 psi
Rationale: Oil pressure is lower when the engine is not under load. A reading between 5 and
20 psi is standard for a large engine at idle.
Question 11
What is the expected range for oil pressure when the vehicle is in motion and under normal
operation?
A) 5-10 psi
VERIFIED ANSWERS (CORRECT SOLUTIONS) | GET IT 100% ACCURATE!!
Question 1
At a speed of 55 mph, approximately how many seconds does it take for a heavy vehicle to come
to a complete stop?
A) 2 seconds
B) 4 seconds
C) 6 seconds
D) 8 seconds
E) 10 seconds
Correct Answer: C) 6 seconds
Rationale: Stopping a heavy vehicle requires significantly more time than a passenger car.
At 55 mph, considering perception, reaction, and braking distance, it takes approximately
6 seconds to stop safely.
Question 2
What is the minimum tread depth required for the front two tires of a heavy vehicle?
A) 1/32"
B) 2/32"
C) 3/32"
D) 4/32"
E) 6/32"
Correct Answer: D) 4/32"
Rationale: Safety regulations require deeper tread on the steering (front) tires to ensure
adequate traction and prevent hydroplaning. The minimum depth is 4/32".
Question 3
What is the maximum allowable play in a 20-inch steering wheel?
A) 1 inch
B) 2 inches
C) 3 inches
D) 4 inches
E) 5 inches
Correct Answer: B) 2"
Rationale: Excessive play makes it difficult to steer accurately. The limit is 10 degrees of
play, which translates to approximately 2 inches on a standard 20-inch steering wheel.
Question 4
What is the minimum tread depth required for all tires except the front two steering tires?
A) 1/32"
B) 2/32"
C) 3/32"
D) 4/32"
, 2
E) 5/32"
Correct Answer: B) 2/32"
Rationale: While front tires require 4/32", the rear and trailer tires are legally required to
have at least 2/32" of tread depth.
Question 5
When performing the initial test for air brake leaks, what is the correct procedure?
A) Pump the brakes until the air pressure reaches 150 PSI
B) Hold the brake down for 5 minutes while the engine is running
C) Pump the brakes 3 times and then hold the brake on the 4th
D) Release the parking brake and watch the gauge for 20 seconds
E) Turn the engine off and pump the brakes 10 times
Correct Answer: C) Pump 3 times and then hold the break on the 4th
Rationale: To check for leaks and ensure the system holds pressure under load, you should
pump the pedal three times to reduce pressure and then hold it on the fourth stroke to
monitor the gauge for movement.
Question 6
Which of the following are the only factors that determine a person's Blood Alcohol
Concentration (BAC)?
A) Type of alcohol and time spent drinking
B) Amount of alcohol and the person's weight
C) Age and height
D) Fitness level and gender
E) Amount of food eaten and altitude
Correct Answer: B) Amount of alcohol and weight
Rationale: While other factors might change how a person feels, BAC is scientifically
calculated based primarily on the amount of alcohol ingested and the volume of blood in
the body (determined by weight).
Question 7
What is the correct formula for calculating the total stopping distance of a heavy vehicle?
A) Speed x Weight + Braking distance
B) Reaction time + Braking distance
C) Perception time + Reaction time + Braking distance
D) Perception time + Reaction distance / 2
E) Deceleration rate + Speed
Correct Answer: C) Perception time + reaction time + braking distance = stopping distance
Rationale: Total stopping distance involves the time it takes to see the hazard (perception),
the time to physically move your foot to the pedal (reaction), and the distance the vehicle
travels once the brakes are applied (braking).
, 3
Question 8
When inspecting the engine compartment, what is the maximum allowable play in any engine
belt?
A) 1/4"
B) 1/2"
C) 3/4"
D) 1 inch
E) 1.5 inches
Correct Answer: C) 3/4"
Rationale: Belts must be tight enough to drive the alternator, water pump, and other
components efficiently. If a belt has more than 3/4" of play, it should be adjusted or
replaced.
Question 9
If your vehicle’s Anti-lock Braking System (ABS) fails while you are driving, what should you
do?
A) Stop immediately on the shoulder
B) Call for a tow truck from the middle of the road
C) Do not stop immediately, but get the system serviced soon
D) Pump the brakes rapidly until the light turns off
E) Turn the engine off and on to reset the computer
Correct Answer: C) Do not stop immediately, service soon
Rationale: The vehicle still has its regular braking capability even if the ABS computer fails.
You do not need to panic or stop immediately, but you should have it fixed as soon as
possible to regain the safety benefits of ABS.
Question 10
Under normal operating conditions at idle, what should the oil pressure gauge read?
A) 0-5 psi
B) 5-20 psi
C) 20-30 psi
D) 40-60 psi
E) 75-100 psi
Correct Answer: B) 5-20 psi
Rationale: Oil pressure is lower when the engine is not under load. A reading between 5 and
20 psi is standard for a large engine at idle.
Question 11
What is the expected range for oil pressure when the vehicle is in motion and under normal
operation?
A) 5-10 psi
