OSHA BASIC ORIENTATION PLUS (SPANISH & ENGLISH)
EXAM 2025/2026
What is the most frequently cited OSHA violation? - ANSWER -Fall
Protection
What key elements are essential to recognizing hazards and reducing or
eliminating workplace hazards? - ANSWER -Management commitment and
employee involvement
You are encouraged to ask your coworkers/supervisor for information
whenever you have a problem or are in doubt about what to do on a job? -
ANSWER -True
It is your responsibility to follow all safety regulations, inform your employer
of any unsafe condition; report all injuries no matter how minor they seem
and wear the proper personal protective equipment? - ANSWER -True
The OSHA standard that addresses the requirements for preventing and
lessening the results of a bad release of toxic, reactive, flammable, or highly
explosive hazardous chemicals from a process - ANSWER -Process safety
management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the
PSM program. PHAs are used to identify and evaluate major processes and
ensure they are - ANSWER -Evaluated, Controlled, and Identified
, In the PSM standard OSHA states employees must be trained if they work
with highly hazardous chemicals. - ANSWER -True
Facilities are not permitted to control your entrance and exit in covered
process areas. - ANSWER -False
What should be your first concern from the moment you enter the work
site? - ANSWER -Safety
Under the Stop Work Authority, you have the right and obligation to stop a
work activity if you have reason to believe your own safety or a coworkers
safety is in jeopardy or if the work plan is not clearly established or
understood . - ANSWER -True
What's needed in order to operate a plant-owned vehicle or mobile
equipment while at a facility - ANSWER -qualified only authorized only
What type of work permits you may encounter on the job - ANSWER -safe
work permits confined space entry permits, hot work permits, line entry or
line breaking permits, lockout/tagout permits
if you are replacing a piece of equipment the new one should be the same
as the one being removed. If its not you should find out whether the change
was on purpose. what is this called - ANSWER -Management of change
EXAM 2025/2026
What is the most frequently cited OSHA violation? - ANSWER -Fall
Protection
What key elements are essential to recognizing hazards and reducing or
eliminating workplace hazards? - ANSWER -Management commitment and
employee involvement
You are encouraged to ask your coworkers/supervisor for information
whenever you have a problem or are in doubt about what to do on a job? -
ANSWER -True
It is your responsibility to follow all safety regulations, inform your employer
of any unsafe condition; report all injuries no matter how minor they seem
and wear the proper personal protective equipment? - ANSWER -True
The OSHA standard that addresses the requirements for preventing and
lessening the results of a bad release of toxic, reactive, flammable, or highly
explosive hazardous chemicals from a process - ANSWER -Process safety
management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the
PSM program. PHAs are used to identify and evaluate major processes and
ensure they are - ANSWER -Evaluated, Controlled, and Identified
, In the PSM standard OSHA states employees must be trained if they work
with highly hazardous chemicals. - ANSWER -True
Facilities are not permitted to control your entrance and exit in covered
process areas. - ANSWER -False
What should be your first concern from the moment you enter the work
site? - ANSWER -Safety
Under the Stop Work Authority, you have the right and obligation to stop a
work activity if you have reason to believe your own safety or a coworkers
safety is in jeopardy or if the work plan is not clearly established or
understood . - ANSWER -True
What's needed in order to operate a plant-owned vehicle or mobile
equipment while at a facility - ANSWER -qualified only authorized only
What type of work permits you may encounter on the job - ANSWER -safe
work permits confined space entry permits, hot work permits, line entry or
line breaking permits, lockout/tagout permits
if you are replacing a piece of equipment the new one should be the same
as the one being removed. If its not you should find out whether the change
was on purpose. what is this called - ANSWER -Management of change
