MK1 SWE PRACTICE TEST BANK 2026
VERIFIED QUESTIONS SOLUTIONS GRADED
A PLUS
●● What article always captain to conduct NJP
Answer: Article 15
●● Where two types of procedures that may be accessed from
maintenance procedure option
Answer: Official and local
●● Who is authorized to conduct tag outs
Answer: Authorizing officer
●● Out of calibration tags should be used when
Answer: When indicating parameter errors are small and consistent
●● For modernized units the boat inspection reports are to be entered
through
Answer: Almis/ EALpage
●● Cutter engineering report shall be completed in accordance with
,Answer: Naval engineering manual chapter 90
●● On an MPC the warning shall come where in the text
Answer: Before the instruction
●● On an MPC what would constitute an expendable
Answer: Rags
●● PMS that does not need to be included in the cutter engineering
report is
Answer: Daily and weekly
●● With regards to casreps what is mandatory on all updates corrects
and cancellations
Answer: REF
●● Which unit besides a shore unit are exempt from filling out the
POSIT line
Answer: Cutter underway
●● A casrep it should be made as soon as possible no later than
____hours
Answer: 24
, ●● Casualties that effect a secondary mission should always have a
casualty category of
Answer: 2
●● AMPN is mandatory after any set that contains an entry of?
Answer: Other, tech, none
●● In a 1PARTSID if the NIIN is not known what needs to be put in the
line
Answer: Unknown
●● What is the criteria for submitting CASCOR
Answer: The delay expressed an hours, and correcting the casualty due
to parts unavailability, a list of all parts requested and dates received; the
total number of man-hours expanded; the number of equipment hours
since last failure
●● You find something else wrong with the piece of equipment that has
already been CASREP'd you should send an?
Answer: Update
●● Where do you find the hierarchy of guidance for specification plans
Answer: NEM chapter 41
VERIFIED QUESTIONS SOLUTIONS GRADED
A PLUS
●● What article always captain to conduct NJP
Answer: Article 15
●● Where two types of procedures that may be accessed from
maintenance procedure option
Answer: Official and local
●● Who is authorized to conduct tag outs
Answer: Authorizing officer
●● Out of calibration tags should be used when
Answer: When indicating parameter errors are small and consistent
●● For modernized units the boat inspection reports are to be entered
through
Answer: Almis/ EALpage
●● Cutter engineering report shall be completed in accordance with
,Answer: Naval engineering manual chapter 90
●● On an MPC the warning shall come where in the text
Answer: Before the instruction
●● On an MPC what would constitute an expendable
Answer: Rags
●● PMS that does not need to be included in the cutter engineering
report is
Answer: Daily and weekly
●● With regards to casreps what is mandatory on all updates corrects
and cancellations
Answer: REF
●● Which unit besides a shore unit are exempt from filling out the
POSIT line
Answer: Cutter underway
●● A casrep it should be made as soon as possible no later than
____hours
Answer: 24
, ●● Casualties that effect a secondary mission should always have a
casualty category of
Answer: 2
●● AMPN is mandatory after any set that contains an entry of?
Answer: Other, tech, none
●● In a 1PARTSID if the NIIN is not known what needs to be put in the
line
Answer: Unknown
●● What is the criteria for submitting CASCOR
Answer: The delay expressed an hours, and correcting the casualty due
to parts unavailability, a list of all parts requested and dates received; the
total number of man-hours expanded; the number of equipment hours
since last failure
●● You find something else wrong with the piece of equipment that has
already been CASREP'd you should send an?
Answer: Update
●● Where do you find the hierarchy of guidance for specification plans
Answer: NEM chapter 41
