OSHA 30 LATEST EXAM PREP QUESTIONS
AND ANSWERS PDF 2026
▶ SDS Section Numbers (Part 16). Answer: Other / 704 Marker
▶ Ladder Ratio. Answer: 4 to 1 ratio (4 feet up to 1 foot out)
▶ When must ladder be tied off to building. Answer: 20 feet up and 5 feet
out
▶ Can a crane lift a load at a 90 degree angle. Answer: Nope
▶ When must you tie off in steel erection. Answer: 30 ft
▶ When can you work under a suspended load in steel erection. Answer:
Must be certified and insured to work under a suspended load
▶ In Excavations, what must be done when you dig 20' or more down.
Answer: must have a structural engineer approve
▶ If a trench is 2 feet deep without any shoring, what can be done to bring
it into compliance?. Answer: Nothing, it is not out of compliance
, ▶ Must shield welder and any employees working within ____ feet of hot
work with amber glasses/goggles. Answer: 20 ft
▶ Must call OSHA if .... Answer: Fatality and 3 or more injured on same
incident
▶ Keep training records for .... Answer: 5 years
▶ Keep incident records for. Answer: 5 years
▶ Keep Hazard Exposure for. Answer: 30 years
▶ 300 Log ("300 Law"). Answer: 90 days Recordable
▶ General Duty Clause. Answer: Employer is responsible for a safe work
site regardless of OSHA standards
▶ OSHA Inspections done by an __________. Answer: Inspector
▶ Only _____________ can issue fines. Answer: Area Director
▶ Less than _____ People on payroll, OSHA does not cover. Answer: 10
people
AND ANSWERS PDF 2026
▶ SDS Section Numbers (Part 16). Answer: Other / 704 Marker
▶ Ladder Ratio. Answer: 4 to 1 ratio (4 feet up to 1 foot out)
▶ When must ladder be tied off to building. Answer: 20 feet up and 5 feet
out
▶ Can a crane lift a load at a 90 degree angle. Answer: Nope
▶ When must you tie off in steel erection. Answer: 30 ft
▶ When can you work under a suspended load in steel erection. Answer:
Must be certified and insured to work under a suspended load
▶ In Excavations, what must be done when you dig 20' or more down.
Answer: must have a structural engineer approve
▶ If a trench is 2 feet deep without any shoring, what can be done to bring
it into compliance?. Answer: Nothing, it is not out of compliance
, ▶ Must shield welder and any employees working within ____ feet of hot
work with amber glasses/goggles. Answer: 20 ft
▶ Must call OSHA if .... Answer: Fatality and 3 or more injured on same
incident
▶ Keep training records for .... Answer: 5 years
▶ Keep incident records for. Answer: 5 years
▶ Keep Hazard Exposure for. Answer: 30 years
▶ 300 Log ("300 Law"). Answer: 90 days Recordable
▶ General Duty Clause. Answer: Employer is responsible for a safe work
site regardless of OSHA standards
▶ OSHA Inspections done by an __________. Answer: Inspector
▶ Only _____________ can issue fines. Answer: Area Director
▶ Less than _____ People on payroll, OSHA does not cover. Answer: 10
people
