Welding Print Reading Exam 2026-2027
Questions And Correct Answers Graded A+
When no number can be divided evenly into both the numerator and the
denominator of a fraction, the fraction is said to be
in lowest terms
Which of the following equations would convert 3.25 inches to millimeters?
3.25 x 25.4
Which of the following equations would convert 7.5 inches to feet?
7.5 divide 12
A decimal rule has ______ divisions on one edge, and either 50 to 100 divisions on
the other edge
10
A number that will divide evenly into both the numerator and the denominator a
fraction is a ______
Common factor
,The marks or divisions on the edge of a rule are called
graduations
A welding drawing that contains both inch units and metric units is said to be
______
dual dimensioned
In a drawing that contains both inch and millimeter dimensions, the inch dimension
is placed above or to the left of the millimeter dimension in the ______ method
position
Millimeters are placed in brackets when the ______ method is used in the United
States
bracket
The item on a dual dimensioned drawing that shows how the inch and millimeter
dimensions can be identified is a ______
note
A decimal number that expresses less than a whole number is a decimal ______
fraction
, Rule marked in millimeters
Metric rule
Marks or divisions on the edge of a rule
Graduations
Encloses the metric dimension in square brackets in a US dual dimensioned
drawing
Bracket method
Measuring the straight-line distance between two points
linear measure
Displays the inch dimension above or to the left of the millimeter dimension in a
US dual dimensioned drawing
Position method
Rule marked in decimal inches
Decimal rule
Questions And Correct Answers Graded A+
When no number can be divided evenly into both the numerator and the
denominator of a fraction, the fraction is said to be
in lowest terms
Which of the following equations would convert 3.25 inches to millimeters?
3.25 x 25.4
Which of the following equations would convert 7.5 inches to feet?
7.5 divide 12
A decimal rule has ______ divisions on one edge, and either 50 to 100 divisions on
the other edge
10
A number that will divide evenly into both the numerator and the denominator a
fraction is a ______
Common factor
,The marks or divisions on the edge of a rule are called
graduations
A welding drawing that contains both inch units and metric units is said to be
______
dual dimensioned
In a drawing that contains both inch and millimeter dimensions, the inch dimension
is placed above or to the left of the millimeter dimension in the ______ method
position
Millimeters are placed in brackets when the ______ method is used in the United
States
bracket
The item on a dual dimensioned drawing that shows how the inch and millimeter
dimensions can be identified is a ______
note
A decimal number that expresses less than a whole number is a decimal ______
fraction
, Rule marked in millimeters
Metric rule
Marks or divisions on the edge of a rule
Graduations
Encloses the metric dimension in square brackets in a US dual dimensioned
drawing
Bracket method
Measuring the straight-line distance between two points
linear measure
Displays the inch dimension above or to the left of the millimeter dimension in a
US dual dimensioned drawing
Position method
Rule marked in decimal inches
Decimal rule
