NICET FIRE ALARM SYSTEMS LEVEL 1
FINAL SCRIPT 2026 COMPLETE QUESTIONS
AND CORRECT ANSWERS VERIFIED
●● what is the maximum number of 12-gaugeTHHN conductors that
can be installed in 1-inch EMT.
Answer: 26
●● Do you resistors are connected in parallel. R1 = 300 Ohms, R2 = 300
Ohms. What is the equivalent resistance?.
Answer: 150 Ohms
●● I room is 200 feet long and 100 feet wide, and the 8 foot high ceiling
is smooth and flat. A spot-type heat detector has been selected that is
listed for a 50 foot maximum spacing between detectors. According to
NFPA 72, how many detectors will be needed to protect this room?.
Answer: 12
●● Fire warning equipment to be installed and residential occupancy's
child produced audible emergency evacuation signal described in.
Answer: ANSI S3.41
, ●● According to NFPA 72, the minimum number of restorable fixed-
temperature spot-type heat detectors that must be tested during each
annual test is.
Answer: Two detectors are more on each initiating device circuit
●● According to, how many spot type heat detectors are required for a
space that is 80 foot long and 55-foot wide with a smooth 10 foot
ceiling? The heat detector is listed for a maximum space between
detectors of 30 feet..
Answer: 6
●● And what is the color code requirement for a spot type heat detector
rated at 200°F.
Answer: White
●● I unless otherwise recommended by manufacture is published
instructions, single and multiple stations smoke alarms installed in one
and two family dwellings should be replaced every.
Answer: 10 years from the date of manufacture
●● When testing a water level supervisory switch serving a pressure
tank, a signal shall indicate if the water level _______________from the
required level..
Answer: Rises or falls 3 inches
FINAL SCRIPT 2026 COMPLETE QUESTIONS
AND CORRECT ANSWERS VERIFIED
●● what is the maximum number of 12-gaugeTHHN conductors that
can be installed in 1-inch EMT.
Answer: 26
●● Do you resistors are connected in parallel. R1 = 300 Ohms, R2 = 300
Ohms. What is the equivalent resistance?.
Answer: 150 Ohms
●● I room is 200 feet long and 100 feet wide, and the 8 foot high ceiling
is smooth and flat. A spot-type heat detector has been selected that is
listed for a 50 foot maximum spacing between detectors. According to
NFPA 72, how many detectors will be needed to protect this room?.
Answer: 12
●● Fire warning equipment to be installed and residential occupancy's
child produced audible emergency evacuation signal described in.
Answer: ANSI S3.41
, ●● According to NFPA 72, the minimum number of restorable fixed-
temperature spot-type heat detectors that must be tested during each
annual test is.
Answer: Two detectors are more on each initiating device circuit
●● According to, how many spot type heat detectors are required for a
space that is 80 foot long and 55-foot wide with a smooth 10 foot
ceiling? The heat detector is listed for a maximum space between
detectors of 30 feet..
Answer: 6
●● And what is the color code requirement for a spot type heat detector
rated at 200°F.
Answer: White
●● I unless otherwise recommended by manufacture is published
instructions, single and multiple stations smoke alarms installed in one
and two family dwellings should be replaced every.
Answer: 10 years from the date of manufacture
●● When testing a water level supervisory switch serving a pressure
tank, a signal shall indicate if the water level _______________from the
required level..
Answer: Rises or falls 3 inches
