NSC LIFT TRUCK OPERATOR EXAM
B.
A.10 feet - answer1. Whats is the minimum safe approach distance (MSAD) with power
line.
b. Maintain 3 point of contact facing the lift truck - answer2. When mounting and
dismounting from a lift truck.
a. Use a spotter - answer3. What you should do if you are driving through an area and
your view is blocked.
B. No - answer4. You need to pick up a pallet and stack it on another pallet. The pallet
weighs 3.800 pounds. Your lift truck has a capacity of 3.500 . Can you move this pallet.
C. Have been trained and authorized by your employer for your lift truck. - answer5. You
should NOT drive a lift truck until you....
C. Follow your facility procedures for taking the lift truck out service. - answer6. What
should you do if you discover a defect during a pre-shift safety inspection ?
A. Conditions in the work place change.
B. The operator is assigned to a different lift truck.
C. The operator has been observed in an incident or near miss incident.
D. All the above - answer7. Refresher training is required when..?
B. As low to the ground as possible given worksite conditions. - answer8. What's the
correct amount of distance you should have between the load and the floor/ground
while driving.
C. Stay in the lift truck and lean away from the point of impact. - answer9. What's the
best thing to do if your lift truck starts to flip over...?
10. How does the boom extension affect your lifting capacity? - answerD. Decrease
your lifting capacity.
C.In direction of the real axle. - answer11. When you drive on an incline and the load is
uphill, how does the center of gravity shift?
C. The operator is more than 25 feet away from the lift truck. - answer12. A lift truck is
considered unattended when.
B.
A.10 feet - answer1. Whats is the minimum safe approach distance (MSAD) with power
line.
b. Maintain 3 point of contact facing the lift truck - answer2. When mounting and
dismounting from a lift truck.
a. Use a spotter - answer3. What you should do if you are driving through an area and
your view is blocked.
B. No - answer4. You need to pick up a pallet and stack it on another pallet. The pallet
weighs 3.800 pounds. Your lift truck has a capacity of 3.500 . Can you move this pallet.
C. Have been trained and authorized by your employer for your lift truck. - answer5. You
should NOT drive a lift truck until you....
C. Follow your facility procedures for taking the lift truck out service. - answer6. What
should you do if you discover a defect during a pre-shift safety inspection ?
A. Conditions in the work place change.
B. The operator is assigned to a different lift truck.
C. The operator has been observed in an incident or near miss incident.
D. All the above - answer7. Refresher training is required when..?
B. As low to the ground as possible given worksite conditions. - answer8. What's the
correct amount of distance you should have between the load and the floor/ground
while driving.
C. Stay in the lift truck and lean away from the point of impact. - answer9. What's the
best thing to do if your lift truck starts to flip over...?
10. How does the boom extension affect your lifting capacity? - answerD. Decrease
your lifting capacity.
C.In direction of the real axle. - answer11. When you drive on an incline and the load is
uphill, how does the center of gravity shift?
C. The operator is more than 25 feet away from the lift truck. - answer12. A lift truck is
considered unattended when.
