Answers Practice Questions with Solutions Newest
2026 2027 | Already Graded A+
Why is it important to evenly distribute large instruments in
a set? - ANSWER--Extra condensation will make the set
more difficult to dry
The part of the steam sterilizer that produces heat inside
the chamber to prevent condensation from forming on the
chamber walls is the
A. Steam gauge
B. Pressure gauge
C. Door jacket
,D. Jacket - ANSWER--D
The need for frequent reprocessing can be MINIMIZED by
A. Proper stock rotation
B. Ordering more supplies
C. Using plastic bags for dust covers
D. Establishing minimum stock quantities - ANSWER--A
What is the coldest part of the sterilizer
A. Back top
B. Center
C. Bottom back
D. Drain line - ANSWER--D
,Gradual heating of packs occurs during which phase of
the steam sterilizer cycle?
A. Holding
B. Exhaust
C. Conditioning
D. Exposure - ANSWER--C
An emergency eye wash station MUST
A. Provide 0.8 gallons of water per minute
B. Supply the water continuously for 30 minutes
C. Permit hands free operations
D. Flush one eye at a time - ANSWER--C.
, What is the MOST important thing to remember when
double peel pouching ?
A. The inner package must remain unsealed
B. The inner package should be folded to fit inside the
outer pouch
C. The inner pouch must lay flay inside the outer pouch
D. The two pouches should be sealed together -
ANSWER--C.
Which of the following BEST describes a MINIMUM
exposure time, temperature , and pressure for prevaccum
steam sterilization of wrapped items?