In the top & bottoms of the acetylene cylinder are safety plugs designed to melt at
Give this one a try later!
220
The hoses used to carry oxygen from the cylinder to the torch are usually
Give this one a try later!
green or black
When cutting thin steel, hold the torch so that the tip is pointing in the direction the
torch is traveling at a ___angle.
, Give this one a try later!
15-20 degree
A cutting flame that has an excess of oxygen is called a(n) ___flame
Give this one a try later!
Oxidizing
When used in oxyfuel cutting propylene mixtures burn at temperatures around
Give this one a try later!
5,193
The most common size oxygen cylinder used for welding & cutting operations
hold_____ cubic feet of oxygen
Give this one a try later!
227
The risk of flash burn can be reduced by wearing
Give this one a try later!
Give this one a try later!
220
The hoses used to carry oxygen from the cylinder to the torch are usually
Give this one a try later!
green or black
When cutting thin steel, hold the torch so that the tip is pointing in the direction the
torch is traveling at a ___angle.
, Give this one a try later!
15-20 degree
A cutting flame that has an excess of oxygen is called a(n) ___flame
Give this one a try later!
Oxidizing
When used in oxyfuel cutting propylene mixtures burn at temperatures around
Give this one a try later!
5,193
The most common size oxygen cylinder used for welding & cutting operations
hold_____ cubic feet of oxygen
Give this one a try later!
227
The risk of flash burn can be reduced by wearing
Give this one a try later!
