UNION PACIFIC CONDUCTOR FINAL EXAM
WITH CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+ 2026
Save
Terms in this set (97)
What is a length of a track between A. Block
consecutive block signal or
between a block signal and the end
of the block system limit.
A. Block
B. Main track
C crossing
What is the appearance of a fixed B. Signal aspect
or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons
,According to rules hierarchy the C. System general order
system special instruction can be
updated by which of the following?
A. Service unit general order
B. General notice
C. System general order
What is an absolute signal that is C. Controlled signal
controlled by a controlled
operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal
,Your duties require you to cross C. Both answers are correct
through a train or a standing cut of
cars. After proper protection is
provided and before crossing over
from one side of the equipment to
the other side, you should?
A. Choose equipment carefully,
using cars equipped with a
crossover platform and handholds
(when available).
B. On equipment where crossover
platforms and handholds are not
available, use end of car structural
bracing to maintain 3-point contact,
il sate to do so.
C. Both answers are correct.
What is a system of tracks, other C. Yard
than main tracks and sidings, that is
used for making up trains, storng
cars, and other purposes?
A. Siding
B. Main track
C. Yard
, To enter an area between two A. Breach
adjacent tracks is the glossary
definition of ?
A. Breach
B. Crossing Through
C. Red Zone
Employees must not get on or off B.Retain a grip with both hands on the handhold
cars and engines (whether standing until both feet are firmly placed on the ground or
or moving) except when required in other support.
the performance of duty, and only
when it can be done safely. When
getting off standing equipment:
A.Let go with both hands before
your feet touch the ground or other
support.
B.Retain a grip with both hands on
the handhold until both feet are
firmly placed on the ground or
other support.
C. Place one foot on the ground,
then let go with one hand and
place the other foot on the ground
before letting go.
WITH CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+ 2026
Save
Terms in this set (97)
What is a length of a track between A. Block
consecutive block signal or
between a block signal and the end
of the block system limit.
A. Block
B. Main track
C crossing
What is the appearance of a fixed B. Signal aspect
or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons
,According to rules hierarchy the C. System general order
system special instruction can be
updated by which of the following?
A. Service unit general order
B. General notice
C. System general order
What is an absolute signal that is C. Controlled signal
controlled by a controlled
operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal
,Your duties require you to cross C. Both answers are correct
through a train or a standing cut of
cars. After proper protection is
provided and before crossing over
from one side of the equipment to
the other side, you should?
A. Choose equipment carefully,
using cars equipped with a
crossover platform and handholds
(when available).
B. On equipment where crossover
platforms and handholds are not
available, use end of car structural
bracing to maintain 3-point contact,
il sate to do so.
C. Both answers are correct.
What is a system of tracks, other C. Yard
than main tracks and sidings, that is
used for making up trains, storng
cars, and other purposes?
A. Siding
B. Main track
C. Yard
, To enter an area between two A. Breach
adjacent tracks is the glossary
definition of ?
A. Breach
B. Crossing Through
C. Red Zone
Employees must not get on or off B.Retain a grip with both hands on the handhold
cars and engines (whether standing until both feet are firmly placed on the ground or
or moving) except when required in other support.
the performance of duty, and only
when it can be done safely. When
getting off standing equipment:
A.Let go with both hands before
your feet touch the ground or other
support.
B.Retain a grip with both hands on
the handhold until both feet are
firmly placed on the ground or
other support.
C. Place one foot on the ground,
then let go with one hand and
place the other foot on the ground
before letting go.
