Comprehensive Construction and Project
Management Exam Review Newest 2026 Questions
and Correct Detailed Answers Already Graded A+
Where is the invert of a sanitary sewer line coming into a manhole found? -
CORRECT ANSWER-Plumbing drawings.
What is the expected projected gain/loss for cost code <phone>0-Subcontracts
assuming a $100 change order? - CORRECT ANSWER-($113).
Which of the following soils is considered cohesive? - CORRECT ANSWER-Clay.
Under an agency construction manager agreement, who holds the contracts with
the trade contractors? - CORRECT ANSWER-Owner.
What is the most appropriate method for the GC to issue a bulletin to
subcontractors? - CORRECT ANSWER-Send the documents to all
subcontractors capable of performing the work.
What type of bracing system uses metal rods anchored into rock or soil outside of
an excavation? - CORRECT ANSWER-Tieback.
,What management system is used to improve customer satisfaction? -
CORRECT ANSWER-All are correct (Six Sigma, TQM, Lean).
What is the force in the y direction at Roller B (By)? - CORRECT ANSWER-5.7.
What does the American Plywood Association Grade Stamp 'Plyform' indicate? -
CORRECT ANSWER-Concrete Placement.
What is acceptable about texting as a means of communication in the
construction industry? - CORRECT ANSWER-Appropriate for clarifying but not
for formal direction.
What is the total labor cost per day for a crew installing 2000 linear feet of 36 inch
diameter concrete pipe? - CORRECT ANSWER-893.60.
What are the three parts most specifications are divided into? - CORRECT
ANSWER-General, Products, and Execution
Which management system was developed by Motorola and focuses on
quantifying defects? - CORRECT ANSWER-Six Sigma
,What indicates a problem when comparing planned with actual progress on a
project schedule? - CORRECT ANSWER-Negative float in critical activities
Which type of survey requires more care with respect to precision and accuracy? -
CORRECT ANSWER-Control
What is the agreement with a third party called when a person engages others to
perform a portion of the work in a contract? - CORRECT ANSWER-Subcontract
What is the purpose of through-wall flashing in brick veneer construction? -
CORRECT ANSWER-To direct escape of moisture
What is the maximum height in feet for a Manual Rolling scaffolding with a base
of 7' x 9'? - CORRECT ANSWER-28
What is the maximum allowable distance of travel to an exit ladder in an opening
trench excavation according to OSHA's rule? - CORRECT ANSWER-25ft
, What is the estimated labor cost per square foot of contact area for a crew of two
carpenters and one laborer completing formwork? - CORRECT ANSWER-
$1.00/sfca
How long must the OSHA Form 300 be kept by the employer? - CORRECT
ANSWER-5 years
What is the maximum horizontal tie-in distance in feet for scaffolds that exceed
the height to base ratio? - CORRECT ANSWER-30
What is the correct reading of the rod at the bottom of a footing that is 2 ft thick
with a top elevation of 102.33 ft? - CORRECT ANSWER-6.45
What is most important when preparing a bid for site work? - CORRECT
ANSWER-Verifying conditions by means of a site visit
True or False: Value Engineering changes the scope of a project by meeting similar
functions without sacrificing quality or services. - CORRECT ANSWER-False
What is an advantage of forming a corporation? - CORRECT ANSWER-
Shareholders have reduced personal liability
Management Exam Review Newest 2026 Questions
and Correct Detailed Answers Already Graded A+
Where is the invert of a sanitary sewer line coming into a manhole found? -
CORRECT ANSWER-Plumbing drawings.
What is the expected projected gain/loss for cost code <phone>0-Subcontracts
assuming a $100 change order? - CORRECT ANSWER-($113).
Which of the following soils is considered cohesive? - CORRECT ANSWER-Clay.
Under an agency construction manager agreement, who holds the contracts with
the trade contractors? - CORRECT ANSWER-Owner.
What is the most appropriate method for the GC to issue a bulletin to
subcontractors? - CORRECT ANSWER-Send the documents to all
subcontractors capable of performing the work.
What type of bracing system uses metal rods anchored into rock or soil outside of
an excavation? - CORRECT ANSWER-Tieback.
,What management system is used to improve customer satisfaction? -
CORRECT ANSWER-All are correct (Six Sigma, TQM, Lean).
What is the force in the y direction at Roller B (By)? - CORRECT ANSWER-5.7.
What does the American Plywood Association Grade Stamp 'Plyform' indicate? -
CORRECT ANSWER-Concrete Placement.
What is acceptable about texting as a means of communication in the
construction industry? - CORRECT ANSWER-Appropriate for clarifying but not
for formal direction.
What is the total labor cost per day for a crew installing 2000 linear feet of 36 inch
diameter concrete pipe? - CORRECT ANSWER-893.60.
What are the three parts most specifications are divided into? - CORRECT
ANSWER-General, Products, and Execution
Which management system was developed by Motorola and focuses on
quantifying defects? - CORRECT ANSWER-Six Sigma
,What indicates a problem when comparing planned with actual progress on a
project schedule? - CORRECT ANSWER-Negative float in critical activities
Which type of survey requires more care with respect to precision and accuracy? -
CORRECT ANSWER-Control
What is the agreement with a third party called when a person engages others to
perform a portion of the work in a contract? - CORRECT ANSWER-Subcontract
What is the purpose of through-wall flashing in brick veneer construction? -
CORRECT ANSWER-To direct escape of moisture
What is the maximum height in feet for a Manual Rolling scaffolding with a base
of 7' x 9'? - CORRECT ANSWER-28
What is the maximum allowable distance of travel to an exit ladder in an opening
trench excavation according to OSHA's rule? - CORRECT ANSWER-25ft
, What is the estimated labor cost per square foot of contact area for a crew of two
carpenters and one laborer completing formwork? - CORRECT ANSWER-
$1.00/sfca
How long must the OSHA Form 300 be kept by the employer? - CORRECT
ANSWER-5 years
What is the maximum horizontal tie-in distance in feet for scaffolds that exceed
the height to base ratio? - CORRECT ANSWER-30
What is the correct reading of the rod at the bottom of a footing that is 2 ft thick
with a top elevation of 102.33 ft? - CORRECT ANSWER-6.45
What is most important when preparing a bid for site work? - CORRECT
ANSWER-Verifying conditions by means of a site visit
True or False: Value Engineering changes the scope of a project by meeting similar
functions without sacrificing quality or services. - CORRECT ANSWER-False
What is an advantage of forming a corporation? - CORRECT ANSWER-
Shareholders have reduced personal liability
