INTRODUCTION TO STEEL DESIGN EXAM
NEWEST 2026 QUESTIONS and CORRECT
DETAILED ANSWERS ALREADY GRADED A+
STEEL DESIGN - CORRECT ANSWER-In most cases, the functional design,
including the establishment of the number of stories and the floor plans, will have
been done by an architect, and the structural engineer must work within the
constraints imposed by this design.
Ideally, the engineer and architect will collaborate throughout the design process
to complete the project in an efficient manner.
an architect
structural engineer - CORRECT ANSWER-In most cases, the functional design,
including the establishment of the number of stories and the floor plans, will have
been done by _____________, and the ____________________ must work within
the constraints imposed by this design.
STRUCTURAL
DESIGN - CORRECT ANSWER-from concept or modelling to construction, the
architects and engineers collaborate.
,the architect decides how the building should look; the engineer must make sure
it doesn't fall down
live loads - CORRECT ANSWER-Examples of these include furniture,
equipment, and occupants of buildings.
dead load - CORRECT ANSWER-are those that are permanent, including the
weight of the structure itself, which is sometimes called the self-weight
dead load - CORRECT ANSWER-self-weight
dead load - CORRECT ANSWER-the weight of nonstructural components such
as floor coverings, partitions, and suspended ceilings.
live loads - CORRECT ANSWER-Wind exerts a pressure or suction on the
exterior surfaces of a building, and because of its transient nature, it properly
belongs in the category of ____________ but is usually considered as another
type of loading.
wind - CORRECT ANSWER-exerts a pressure or suction on the exterior surfaces
of a building
, lateral - CORRECT ANSWER-_________ loads are most detrimental to tall
structures
true - CORRECT ANSWER-true or false
wind loads are usually not as important for low buildings
false, infrequent - CORRECT ANSWER-true or false
Although wind is present most of the time, wind loads of the magnitude
considered in the design are frequent and are not considered to be fatigue loads.
Design
SPECIFICATIONS - CORRECT ANSWER-represent what is considered to be good
engineering practice based on the latest research.
national structural code of the philippines - CORRECT ANSWER-nscp meaning
steel - CORRECT ANSWER-an alloy of primarily iron and carbon, with fewer
impurities and less carbon than cast iron, was first used in heavy construction in
the nineteenth century.
NEWEST 2026 QUESTIONS and CORRECT
DETAILED ANSWERS ALREADY GRADED A+
STEEL DESIGN - CORRECT ANSWER-In most cases, the functional design,
including the establishment of the number of stories and the floor plans, will have
been done by an architect, and the structural engineer must work within the
constraints imposed by this design.
Ideally, the engineer and architect will collaborate throughout the design process
to complete the project in an efficient manner.
an architect
structural engineer - CORRECT ANSWER-In most cases, the functional design,
including the establishment of the number of stories and the floor plans, will have
been done by _____________, and the ____________________ must work within
the constraints imposed by this design.
STRUCTURAL
DESIGN - CORRECT ANSWER-from concept or modelling to construction, the
architects and engineers collaborate.
,the architect decides how the building should look; the engineer must make sure
it doesn't fall down
live loads - CORRECT ANSWER-Examples of these include furniture,
equipment, and occupants of buildings.
dead load - CORRECT ANSWER-are those that are permanent, including the
weight of the structure itself, which is sometimes called the self-weight
dead load - CORRECT ANSWER-self-weight
dead load - CORRECT ANSWER-the weight of nonstructural components such
as floor coverings, partitions, and suspended ceilings.
live loads - CORRECT ANSWER-Wind exerts a pressure or suction on the
exterior surfaces of a building, and because of its transient nature, it properly
belongs in the category of ____________ but is usually considered as another
type of loading.
wind - CORRECT ANSWER-exerts a pressure or suction on the exterior surfaces
of a building
, lateral - CORRECT ANSWER-_________ loads are most detrimental to tall
structures
true - CORRECT ANSWER-true or false
wind loads are usually not as important for low buildings
false, infrequent - CORRECT ANSWER-true or false
Although wind is present most of the time, wind loads of the magnitude
considered in the design are frequent and are not considered to be fatigue loads.
Design
SPECIFICATIONS - CORRECT ANSWER-represent what is considered to be good
engineering practice based on the latest research.
national structural code of the philippines - CORRECT ANSWER-nscp meaning
steel - CORRECT ANSWER-an alloy of primarily iron and carbon, with fewer
impurities and less carbon than cast iron, was first used in heavy construction in
the nineteenth century.
