VERSION 2026 QUESTIONS AND 100% Verified
ANSWERS
1 In an emergency situation, what is the rigger's FIRST priority? - answer>>>To
prevent injury or loss of life
2) What is the most important reason rigging hardware should NOT be
modified? - answer>>>It could negatively affect its capacity
3) The point of any object's weight can be assumed to be concentrated at:
- answer>>>Center of gravity
4) What is required if there is a deviation in the lift plan? - answer>>>A new
lift plan
5) On level ground using skids and rollers, what percent of the weight of the
load should yield the required line pull as a general rule of thumb? - answer>>>5%
6) All of the following are results of unbalanced reeving of the hook block
EXCEPT: - answer>>>Wear on the hook
, Advanced rigging test 2 COMPLETE EXAM LATEST
VERSION 2026 QUESTIONS AND 100% Verified
ANSWERS
7) Before a spreader bar or beams can be used they MUST have been: -
answer>>>Tested and approved
8) When materials are being hoisted to an upper level, a tag line is used to:
- answer>>>Help control the load
9) Two cranes are lifting 100 tons . If crane A has 40 % of the load , how much
weight will crane B have on its hook? - answer>>>120,000 Ibs.
10) To confirm the rated capacity of a specific sling, consult the manufacturer's:
- answer>>>Sling tag
11) OSHA regulations require hook replacement if the opening
exceeds what percentage of its original throat opening? - answer>>>15%
12) At what percentage of increase in length should a chain sling be removed
from service? - answer>>>5%