ATSSA TRAFFIC SUPERVISOR MULTIPLECHOICE SOLUTION 338 QUESTIONS AND ANSWER FOR
FREE 2026
Is a shadow vehicle used in all tra𝑓𝑓ic zones?
A. True
B. False - the correct answer is False
The shadow vehicle is occupied whenever workers are in the work area.
A. True
B. False - the correct answer is False
What class one light is the shadow vehicle equipped with?
A. Flashing Yellow Light
B. Oscillating Yellow Light
C. Yellow Strobe Light
D. All o𝑓 the above - the correct answer is All o 𝑓 the
above
When may cones be substituted 𝑓or drums?
A. Daytime tra𝑓𝑓ic control minimum height 18"
B. Daytime tra𝑓𝑓ic control minimum height 28"
C. Daytime tra𝑓𝑓ic control minimum height 36"
D. Daytime tra𝑓𝑓ic control minimum height 42" - the correct answer is Daytime tra 𝑓𝑓ic control
minimum height 28"
When may cones be substituted 𝑓or drums?
A. Daytime tra𝑓𝑓ic control minimum height 18"
B. Daytime tra𝑓𝑓ic control minimum height 28"
,C. Daytime tra𝑓𝑓ic control minimum height 36"
D. Daytime tra𝑓𝑓ic control minimum height 42" - the correct answer is Daytime tra 𝑓𝑓ic control
minimum height 28"
When cones are substituted 𝑓or drums 𝑓or nighttime closers, what is the minimum cone
height requirement?
A. 18"
B. 28"
C. 36"
D. 42" - the correct answer is 42"
When cones are substituted 𝑓or drums at nighttime closer, what is the maximum cone spacing?
A. 20'
B. 30'
C. 40'
D. 50' - the correct answer is
40'
What type o𝑓 𝑓lashing warning lights are required when there is a nighttime lane closer?
A. ROAD WORK AHEAD
B. LANE CLOSED AHEAD
C. A & B
D. NONE OF THE ABOVE - the correct answer is ROAD WORK AHEAD
&
LANE CLOSED AHEAD
I𝑓 there is a lane closure o𝑓 greater than three days, what is required?
,A. Work zone dotted lines, 4' in length separated by 10' gaps, shall be provided to identi 𝑓y the merge.
B. The appropriate color work zone edge lines shall be applied along the taper and tangent sections.
C. All the above
D. None o𝑓 the above - the correct answer is The appropriate color work zone edge lines shall be applied
along the taper and tangent sections.
Work zone pavement marking that con𝑓lict with 𝑓inal tra 𝑓𝑓ic lanes shall be temporary paint.
A. True
B. False - the correct answer is False
What are the extra advance warning signs?
A. Lane Close Ahead
B. Watch 𝑓or Stopped Tra𝑓𝑓ic
C. Road Work Ahead
D. All the above - the correct answer is Lane Change Ahead
&
Watch 𝑓or Stopped Tra𝑓𝑓ic
&
Road Work Ahead
Is the advisory speed plaque used in all tra 𝑓𝑓ic zones?
A. True
B. False - the correct answer is False
When the approach speed limit is 40 mph or less, 36" warning signs may be used.
A. True
, B. False - the correct answer is True
Road Work Ahead signs shall be provided on entrance ramps or roadways entering the work limits.
A. True
B. False - the correct answer is True
End Road Work signs are only required 𝑓or lane closures o 𝑓 more than ______ day.
A. 1
B. 2
C. 3
D 4 - the correct answer is
1
Sign spacing should be adjusted to avoid con 𝑓lict with existing signs, minimum spacing to existing signs
shall be 200' 𝑓or speeds o𝑓 45 mph or less and a minimum o 𝑓 400' 𝑓or speeds 50 mph or greater.
A. True
B. False - the correct answer is True
The minimum acceptable length 𝑓or the merge taper shall be determined by _________ the width o 𝑓
the o𝑓𝑓set by the merge taper rate.
A. Subtracting
B. Adding
C. Divide
D. Multiplying - the correct answer is
Multiplying
The tangent (recovery area) section between the two merge tapers should be 2 times longer o 𝑓 the two
merge tapers.
FREE 2026
Is a shadow vehicle used in all tra𝑓𝑓ic zones?
A. True
B. False - the correct answer is False
The shadow vehicle is occupied whenever workers are in the work area.
A. True
B. False - the correct answer is False
What class one light is the shadow vehicle equipped with?
A. Flashing Yellow Light
B. Oscillating Yellow Light
C. Yellow Strobe Light
D. All o𝑓 the above - the correct answer is All o 𝑓 the
above
When may cones be substituted 𝑓or drums?
A. Daytime tra𝑓𝑓ic control minimum height 18"
B. Daytime tra𝑓𝑓ic control minimum height 28"
C. Daytime tra𝑓𝑓ic control minimum height 36"
D. Daytime tra𝑓𝑓ic control minimum height 42" - the correct answer is Daytime tra 𝑓𝑓ic control
minimum height 28"
When may cones be substituted 𝑓or drums?
A. Daytime tra𝑓𝑓ic control minimum height 18"
B. Daytime tra𝑓𝑓ic control minimum height 28"
,C. Daytime tra𝑓𝑓ic control minimum height 36"
D. Daytime tra𝑓𝑓ic control minimum height 42" - the correct answer is Daytime tra 𝑓𝑓ic control
minimum height 28"
When cones are substituted 𝑓or drums 𝑓or nighttime closers, what is the minimum cone
height requirement?
A. 18"
B. 28"
C. 36"
D. 42" - the correct answer is 42"
When cones are substituted 𝑓or drums at nighttime closer, what is the maximum cone spacing?
A. 20'
B. 30'
C. 40'
D. 50' - the correct answer is
40'
What type o𝑓 𝑓lashing warning lights are required when there is a nighttime lane closer?
A. ROAD WORK AHEAD
B. LANE CLOSED AHEAD
C. A & B
D. NONE OF THE ABOVE - the correct answer is ROAD WORK AHEAD
&
LANE CLOSED AHEAD
I𝑓 there is a lane closure o𝑓 greater than three days, what is required?
,A. Work zone dotted lines, 4' in length separated by 10' gaps, shall be provided to identi 𝑓y the merge.
B. The appropriate color work zone edge lines shall be applied along the taper and tangent sections.
C. All the above
D. None o𝑓 the above - the correct answer is The appropriate color work zone edge lines shall be applied
along the taper and tangent sections.
Work zone pavement marking that con𝑓lict with 𝑓inal tra 𝑓𝑓ic lanes shall be temporary paint.
A. True
B. False - the correct answer is False
What are the extra advance warning signs?
A. Lane Close Ahead
B. Watch 𝑓or Stopped Tra𝑓𝑓ic
C. Road Work Ahead
D. All the above - the correct answer is Lane Change Ahead
&
Watch 𝑓or Stopped Tra𝑓𝑓ic
&
Road Work Ahead
Is the advisory speed plaque used in all tra 𝑓𝑓ic zones?
A. True
B. False - the correct answer is False
When the approach speed limit is 40 mph or less, 36" warning signs may be used.
A. True
, B. False - the correct answer is True
Road Work Ahead signs shall be provided on entrance ramps or roadways entering the work limits.
A. True
B. False - the correct answer is True
End Road Work signs are only required 𝑓or lane closures o 𝑓 more than ______ day.
A. 1
B. 2
C. 3
D 4 - the correct answer is
1
Sign spacing should be adjusted to avoid con 𝑓lict with existing signs, minimum spacing to existing signs
shall be 200' 𝑓or speeds o𝑓 45 mph or less and a minimum o 𝑓 400' 𝑓or speeds 50 mph or greater.
A. True
B. False - the correct answer is True
The minimum acceptable length 𝑓or the merge taper shall be determined by _________ the width o 𝑓
the o𝑓𝑓set by the merge taper rate.
A. Subtracting
B. Adding
C. Divide
D. Multiplying - the correct answer is
Multiplying
The tangent (recovery area) section between the two merge tapers should be 2 times longer o 𝑓 the two
merge tapers.
