OTP 2 QUESTION AND CORRECT
ANSWERS|A+ GRADED
What is the primary function of Register 13? - ANSWER✔️Cashier
The green network cable connects what to the Biscuit Box under the register? - ANSWER✔️The
PED multiport cable to the Biscuit Box
Kiosks - ANSWER✔️Knowledge Check
which device does not connect to the kiosk? - ANSWER✔️Biometric reader
True or False: the peds in the kiosk will connect directly to the kiosk controller? -
ANSWER✔️False (PED connects tot he PED multiport cable inside the kiosk.)
Where does the kiosk controller connect to the network? - ANSWER✔️to a yellow network jack
inside the kiosk housing
which of the following components would have to be replaced by an OTP Pro or break/fix
provider? - ANSWER✔️Kiosk Controller
, True or False: The network jacks within the kiosk housing use a different color coding than front
counter? - ANSWER✔️False
what can cause a kiosk to be unable to take a customer's order? - ANSWER✔️All of the above
Controllers - ANSWER✔️Knowledge Check
you find that all the receipts are coming out on Side 2 of the table.
where would you start in trying to solve the issue? - ANSWER✔️confirm the printer cable
fromKVS 1 is connected to the I/O port on Side 1's A/B switchbox.
what is the maximum number of grill printers when using side specific grill printing? -
ANSWER✔️4
when a restaurant has side specific grill printing, what piece of equipment is used to select the
printer for that side? - ANSWER✔️A/B Switching
Which of the following is NOT a typical connection of a KVS controller in the kitchen? -
ANSWER✔️CBB printer
which port(s) on the KVS controller does the Grill Side 1 Bumpbar cable connect to? -
ANSWER✔️Serial Port 1 and an open USB port
true or false: when connecting a monitor to a display port on the controller, you will need to use
an adapter cable. - ANSWER✔️True
Kitchen Side 2 monitors connects to what port on the KVS controllers? - ANSWER✔️Video port
2 on KVS controllers
True or false: The device number for the HOTG controller will always be KVS 5 in BDAP. -
ANSWER✔️False
true or false: in a four printer, Side specific Grill printing setup, the printers connect to the KVS
controllers via A/B switchbox. - ANSWER✔️true
Which KVS controller is found in the Drive Thru present window area? - ANSWER✔️4
What is the function of the printer connected to KVS 4? - ANSWER✔️CBB drink Slips
Which port on the controller is used to send and receive bumpbar data? - ANSWER✔️serial ports
Dual Point 2.0 - ANSWER✔️Knowledge Check
ANSWERS|A+ GRADED
What is the primary function of Register 13? - ANSWER✔️Cashier
The green network cable connects what to the Biscuit Box under the register? - ANSWER✔️The
PED multiport cable to the Biscuit Box
Kiosks - ANSWER✔️Knowledge Check
which device does not connect to the kiosk? - ANSWER✔️Biometric reader
True or False: the peds in the kiosk will connect directly to the kiosk controller? -
ANSWER✔️False (PED connects tot he PED multiport cable inside the kiosk.)
Where does the kiosk controller connect to the network? - ANSWER✔️to a yellow network jack
inside the kiosk housing
which of the following components would have to be replaced by an OTP Pro or break/fix
provider? - ANSWER✔️Kiosk Controller
, True or False: The network jacks within the kiosk housing use a different color coding than front
counter? - ANSWER✔️False
what can cause a kiosk to be unable to take a customer's order? - ANSWER✔️All of the above
Controllers - ANSWER✔️Knowledge Check
you find that all the receipts are coming out on Side 2 of the table.
where would you start in trying to solve the issue? - ANSWER✔️confirm the printer cable
fromKVS 1 is connected to the I/O port on Side 1's A/B switchbox.
what is the maximum number of grill printers when using side specific grill printing? -
ANSWER✔️4
when a restaurant has side specific grill printing, what piece of equipment is used to select the
printer for that side? - ANSWER✔️A/B Switching
Which of the following is NOT a typical connection of a KVS controller in the kitchen? -
ANSWER✔️CBB printer
which port(s) on the KVS controller does the Grill Side 1 Bumpbar cable connect to? -
ANSWER✔️Serial Port 1 and an open USB port
true or false: when connecting a monitor to a display port on the controller, you will need to use
an adapter cable. - ANSWER✔️True
Kitchen Side 2 monitors connects to what port on the KVS controllers? - ANSWER✔️Video port
2 on KVS controllers
True or false: The device number for the HOTG controller will always be KVS 5 in BDAP. -
ANSWER✔️False
true or false: in a four printer, Side specific Grill printing setup, the printers connect to the KVS
controllers via A/B switchbox. - ANSWER✔️true
Which KVS controller is found in the Drive Thru present window area? - ANSWER✔️4
What is the function of the printer connected to KVS 4? - ANSWER✔️CBB drink Slips
Which port on the controller is used to send and receive bumpbar data? - ANSWER✔️serial ports
Dual Point 2.0 - ANSWER✔️Knowledge Check
