FDNY C30 Flammable_Combustible Finishing
Operations Exam COMPLETE QUESTIONS AND
DETAILED SOLUTIONS LATEST UPDATE!!
During operation, spraying equipment must
be_______________with the ventilation system to ensure
that spraying cannot take place unless the ventilation
system is operating. - ANSWER--Interlocked
Panels for light fixtures should be separated from the
fixture to prevent the surface temperature of the panel
from exceeding - ANSWER--200°F (93°C)
,Spray booths, rooms and spaces should not be alternately
used for different types of coating materials when the
combination of materials could cause spontaneous
ignition, unless - ANSWER--All deposits of the first
material are removed from the booth, room or space and
exhaust ducts prior to spraying with a different material.
When dipping liquids are heated directly, or heated by the
surface temperature of the object being dipped,
protection must be provided against the accumulation of -
ANSWER--Vapors, self-ignition and excessively high
temperatures.
Powder Coating - ANSWER--An operations using finely
ground particles of protective finishing material applied in
, dry powder form by a fluidized bed, electrostatic fluidized
bed, powder spray guns or electrostatic powder spray
guns
Dip-tank operations must be located in a room that is: -
ANSWER--• Specifically designed for that purpose
• Protected by a Fire Extinguishing System
• Separated vertically and horizontally from other areas as
in accordance with the construction and Building Code in
Group A, I or R occupancies.
Not to be used - ANSWER--Spray booths and spray
rooms are_________________for the purpose of drying
Operations Exam COMPLETE QUESTIONS AND
DETAILED SOLUTIONS LATEST UPDATE!!
During operation, spraying equipment must
be_______________with the ventilation system to ensure
that spraying cannot take place unless the ventilation
system is operating. - ANSWER--Interlocked
Panels for light fixtures should be separated from the
fixture to prevent the surface temperature of the panel
from exceeding - ANSWER--200°F (93°C)
,Spray booths, rooms and spaces should not be alternately
used for different types of coating materials when the
combination of materials could cause spontaneous
ignition, unless - ANSWER--All deposits of the first
material are removed from the booth, room or space and
exhaust ducts prior to spraying with a different material.
When dipping liquids are heated directly, or heated by the
surface temperature of the object being dipped,
protection must be provided against the accumulation of -
ANSWER--Vapors, self-ignition and excessively high
temperatures.
Powder Coating - ANSWER--An operations using finely
ground particles of protective finishing material applied in
, dry powder form by a fluidized bed, electrostatic fluidized
bed, powder spray guns or electrostatic powder spray
guns
Dip-tank operations must be located in a room that is: -
ANSWER--• Specifically designed for that purpose
• Protected by a Fire Extinguishing System
• Separated vertically and horizontally from other areas as
in accordance with the construction and Building Code in
Group A, I or R occupancies.
Not to be used - ANSWER--Spray booths and spray
rooms are_________________for the purpose of drying
