Certified Playground Safety Inspector CPSI
Sample Exam Questions and verified answers
ACTUAL EXAM 2026 TEST!! Graded A+ |
2025|2026 EXAM UPDATE
Save
Practice questions for this set
Learn 1 /7 Study with Learn
DOJ 2010 ADA Standard for Accessible Design
Choose an answer
To be compliant with ASTM 1487, a
21. Where is the best source for
1 2 designer or manufacturer of
accessible design information
playground equipment should
5. Manufacturers of playground
13. The Site History File for a equipment must: provide the
3 4
playground should contains manufacturer's identification of the
equipment
Don't know?
, Terms in this set (74)
To be compliant with ASTM 1487, a provide buyers with a parts list for the
designer or manufacturer of playground
playground equipment should
2. The fish or wedge probe is used a partially bounded opening
to determine whether or not a
hazard exists on
3. Which of the following is correct Critical height must equal or exceed fall height
regarding the impact-attenuation of
surfacing material
4. When evaluating the structural hire a licensed professional engineer to certify
integrity of a support structure for a the integrity of the equipment
swing that appears to be failing, a
CPSI should
5. Manufacturers of playground
equipment must: provide the
manufacturer's identification of the
equipment
6. The majority of injuries associated falls to the surface on which the equipment was
with playground equipment result located
from
7. An opening may present a grabs the 5/8" (16mm) dowel
common crush or shear hazard only
if it
Sample Exam Questions and verified answers
ACTUAL EXAM 2026 TEST!! Graded A+ |
2025|2026 EXAM UPDATE
Save
Practice questions for this set
Learn 1 /7 Study with Learn
DOJ 2010 ADA Standard for Accessible Design
Choose an answer
To be compliant with ASTM 1487, a
21. Where is the best source for
1 2 designer or manufacturer of
accessible design information
playground equipment should
5. Manufacturers of playground
13. The Site History File for a equipment must: provide the
3 4
playground should contains manufacturer's identification of the
equipment
Don't know?
, Terms in this set (74)
To be compliant with ASTM 1487, a provide buyers with a parts list for the
designer or manufacturer of playground
playground equipment should
2. The fish or wedge probe is used a partially bounded opening
to determine whether or not a
hazard exists on
3. Which of the following is correct Critical height must equal or exceed fall height
regarding the impact-attenuation of
surfacing material
4. When evaluating the structural hire a licensed professional engineer to certify
integrity of a support structure for a the integrity of the equipment
swing that appears to be failing, a
CPSI should
5. Manufacturers of playground
equipment must: provide the
manufacturer's identification of the
equipment
6. The majority of injuries associated falls to the surface on which the equipment was
with playground equipment result located
from
7. An opening may present a grabs the 5/8" (16mm) dowel
common crush or shear hazard only
if it
