1|Page
PA MOTOR VEHICLE PHYSICAL DAMAGE APPRAISER EXAM LATEST 2026-2027
ACTUAL EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED
ANSWERS (100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
The fabric or cardboard-like lining that covers the inner roof panel
and roof bows is called the
a) Vibration damper
b) Scalp molding
c) Headliner
d) Insulator pad - ANSWER-c) Headliner
What component found below the rear window on the inside of
the vehicle serves as a shelf and provides internal bracing?
a) Firewall
b) Rear lower body panel
c) Rear upper body panel
d) Rear package shelf - ANSWER-d) Rear package shelf
What component combines the deck lid and stationary back glass
into a single assembly that lifts up like a deck lid?
,2|Page
a) Sail panel
b) Tail panel
c) Hatchback
d) Fender - ANSWER-c) Hatchback
Where is the rear lower body panel located?
a) Between the deck lid and the rear bumper
b) Below the rear window on the inside of the vehicle
c) Between the deck lid and the rear window
d) Between the deck lid and the rear package shelf - ANSWER-a)
Between the deck lid and the rear bumper
The bottom of the window glass fits into a component called the
a) Run channel
b) Sash channel
c) Window regulator
d) Edge guard - ANSWER-b) Sash channel
,3|Page
Where are the rear doors mounted on four-door cars?
a) Hinge pillars
b) Center pillars
c) Door pillars
d) Quarter panels - ANSWER-b) Center pillars
The sides of the window glass travel in components called
a) Run channel
b) Edge guards
c) Window regulators
d) Sash channels - ANSWER-a) Run channel
Slots, holes, dimples and other dents are built into unibody panels
to protect the vehicle from the energy of a collision. These areas
are called
a) Unirails
b) Crush zones
c) Torque boxes
d) Energy absorbers - ANSWER-b) Crush zones
, 4|Page
Which one of the following components is NOT part of a unibody
structure?
a) Strut towers
b) Unirails
c) Frame
d) Radiator support - ANSWER-c) Frame
An automobile that has a separate substructure to which the
various front end, body and mechanical parts of the vehicle are
bolted is called a/an
a) Unitized vehicle
b) Unibody
c) Conventional frame vehicle
d) Channel vehicle - ANSWER-c) Conventional frame vehicle
On a unibody car, the lock pillar is also known as the
a) Quarter pillar
b) B pillar
PA MOTOR VEHICLE PHYSICAL DAMAGE APPRAISER EXAM LATEST 2026-2027
ACTUAL EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED
ANSWERS (100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
The fabric or cardboard-like lining that covers the inner roof panel
and roof bows is called the
a) Vibration damper
b) Scalp molding
c) Headliner
d) Insulator pad - ANSWER-c) Headliner
What component found below the rear window on the inside of
the vehicle serves as a shelf and provides internal bracing?
a) Firewall
b) Rear lower body panel
c) Rear upper body panel
d) Rear package shelf - ANSWER-d) Rear package shelf
What component combines the deck lid and stationary back glass
into a single assembly that lifts up like a deck lid?
,2|Page
a) Sail panel
b) Tail panel
c) Hatchback
d) Fender - ANSWER-c) Hatchback
Where is the rear lower body panel located?
a) Between the deck lid and the rear bumper
b) Below the rear window on the inside of the vehicle
c) Between the deck lid and the rear window
d) Between the deck lid and the rear package shelf - ANSWER-a)
Between the deck lid and the rear bumper
The bottom of the window glass fits into a component called the
a) Run channel
b) Sash channel
c) Window regulator
d) Edge guard - ANSWER-b) Sash channel
,3|Page
Where are the rear doors mounted on four-door cars?
a) Hinge pillars
b) Center pillars
c) Door pillars
d) Quarter panels - ANSWER-b) Center pillars
The sides of the window glass travel in components called
a) Run channel
b) Edge guards
c) Window regulators
d) Sash channels - ANSWER-a) Run channel
Slots, holes, dimples and other dents are built into unibody panels
to protect the vehicle from the energy of a collision. These areas
are called
a) Unirails
b) Crush zones
c) Torque boxes
d) Energy absorbers - ANSWER-b) Crush zones
, 4|Page
Which one of the following components is NOT part of a unibody
structure?
a) Strut towers
b) Unirails
c) Frame
d) Radiator support - ANSWER-c) Frame
An automobile that has a separate substructure to which the
various front end, body and mechanical parts of the vehicle are
bolted is called a/an
a) Unitized vehicle
b) Unibody
c) Conventional frame vehicle
d) Channel vehicle - ANSWER-c) Conventional frame vehicle
On a unibody car, the lock pillar is also known as the
a) Quarter pillar
b) B pillar
