BICSI - Installer 1 - Review | QUESTIONS AND ANSWERS | LATEST UPDATE
ANSWERS QUESTIONS
C Which of the following is a property of an electromagnetic field built around a
conductor that opposes any changes in current flow in a circuit?
A Impedance
B Capacitance
C Inductance
D Resistance
A Which of the following markings is used for non-conductive optical fiber general-
purpose cables?
A OFNG
B OFCR
C OFCP
D OFNP
,A Which of the following refers to a set of rules issued by a governmental body at
the state level within the US?
A Regulations
B Best Practices
C Applications
D Guidelines
B What is the specified performance level for Category 6 cable?
A 100 MHz
B 250 MHz
C 500 MHz
D 600 MHz
A Which type of optical fiber cable should be color coded with an Orange
outer cable sheath?
A MM with a 100 um core diameter
B Dispersion-shifted SM optical fiber
C Polarization maintain SM optical fiber
D SM optical fiber
D Which of the following is the primary benefit of using wall-mounted racks and
cabinets in place of traditional equipment racks?
A Provides equipment with a higher level of protection
B Allows for the equipment to be easily rearranged
C Optimizes airflow within the equipment room
D Takes up less space within the equipment room
C Which topology uses a linear configuration that places all network devices on
one length of cable?
A Star
B Ring
C Bus
, D Which of the Two organizations jointly oversee the worldwide standardization of
telecommunications cabling?
A Alliance for Telecommunications Industry Solutions (ATIS) and Society for Cable
Telecommunications Engineers (SCTE)
B National Electrical Contractors Association (NECA) and National Fire Protection
Association (NFPA)
C Comite Europeen de Normalisation Electrotechnique (CENELEC) and Electronic
Industries Association (EIA)
D International Organization for Standardization (ISO) and International
Electrotechnical Commission (IEC)
B Which of the following is designed to provide protection from harmful chemicals?
A Cut-resistant gloves
B Rubber gloves
C Leather gloves
B Which of the following is a building-serving space that houses large pieces of
common active equipment?
A TR
B ER
C TE
D Mechanical Room
E Battery room
C Which phase of testing includes documenting the test results?
A Phase 1
B Phase 2
C Phase 3
A Which of the following are typically used to support cables between a cable tray
and work area outlets?
A J-Hook
B Innerduct
ANSWERS QUESTIONS
C Which of the following is a property of an electromagnetic field built around a
conductor that opposes any changes in current flow in a circuit?
A Impedance
B Capacitance
C Inductance
D Resistance
A Which of the following markings is used for non-conductive optical fiber general-
purpose cables?
A OFNG
B OFCR
C OFCP
D OFNP
,A Which of the following refers to a set of rules issued by a governmental body at
the state level within the US?
A Regulations
B Best Practices
C Applications
D Guidelines
B What is the specified performance level for Category 6 cable?
A 100 MHz
B 250 MHz
C 500 MHz
D 600 MHz
A Which type of optical fiber cable should be color coded with an Orange
outer cable sheath?
A MM with a 100 um core diameter
B Dispersion-shifted SM optical fiber
C Polarization maintain SM optical fiber
D SM optical fiber
D Which of the following is the primary benefit of using wall-mounted racks and
cabinets in place of traditional equipment racks?
A Provides equipment with a higher level of protection
B Allows for the equipment to be easily rearranged
C Optimizes airflow within the equipment room
D Takes up less space within the equipment room
C Which topology uses a linear configuration that places all network devices on
one length of cable?
A Star
B Ring
C Bus
, D Which of the Two organizations jointly oversee the worldwide standardization of
telecommunications cabling?
A Alliance for Telecommunications Industry Solutions (ATIS) and Society for Cable
Telecommunications Engineers (SCTE)
B National Electrical Contractors Association (NECA) and National Fire Protection
Association (NFPA)
C Comite Europeen de Normalisation Electrotechnique (CENELEC) and Electronic
Industries Association (EIA)
D International Organization for Standardization (ISO) and International
Electrotechnical Commission (IEC)
B Which of the following is designed to provide protection from harmful chemicals?
A Cut-resistant gloves
B Rubber gloves
C Leather gloves
B Which of the following is a building-serving space that houses large pieces of
common active equipment?
A TR
B ER
C TE
D Mechanical Room
E Battery room
C Which phase of testing includes documenting the test results?
A Phase 1
B Phase 2
C Phase 3
A Which of the following are typically used to support cables between a cable tray
and work area outlets?
A J-Hook
B Innerduct
