40 hr Asbestos Contractor/Supervisor Course Questions and Answers Best rated A+ Guaranteed Success Latest Update

Asbestos Containing Building Material - CORRECT ANSWER-ACBM 0.3-0.8 microns - CORRECT ANSWER-size of asbestos fiber asbestos containing material - CORRECT ANSWER-ACM presumed asbestos containing material - CORRECT ANSWER-PACM regulated asbestos containing material - CORRECT ANSWER-RACM Polarized Light Microscopy (method for testing PACM) - CORRECT ANSWER-PLM 1 - CORRECT ANSWER-Material is considered asbestos containing when it has ______% asbestos able to be crumbled to a powder with hand pressure - CORRECT ANSWER-Friable cannot be crumbled by hand; will not typically release asbestos fiber into the air - CORRECT ANSWER-Non-Friable Code of Federal Regulations - CORRECT ANSWER-CFR excursion limit - CORRECT ANSWER-EL Permissible Exposure Limit - CORRECT ANSWER-PEL 1.0 f/cc over 30 min - CORRECT ANSWER-what is the EL for asbestos? 0.1 f/cc over 8 hours - CORRECT ANSWER-what is the PEL for asbestos? removal of friable material; high risk - CORRECT ANSWER-Class 1 asbestos work Friable - CORRECT ANSWER-Friable or Non-Friable? sprayed surfacing material Non-Friable - CORRECT ANSWER-Friable or Non-Friable? wall board Friable - CORRECT ANSWER-Friable or Non-Friable? TSINon-Friable - CORRECT ANSWER-Friable or Non-Friable? roofing Removal of Non-Friable ACM - CORRECT ANSWER-Class 2 asbestos work Work that may disturb asbestos or require removal of a small amount of ACM - CORRECT ANSWER-Class 3 asbestos work Maintenance work of ACM - CORRECT ANSWER-Class 4 asbestos work Thermal System Insulation - CORRECT ANSWER-TSI