2026 TEST BANK| ALABAMA OTPS TEST PREP WITH
COMPLETE 300 REAL EXAM QUESTIONS AND
CORRECT VERIFIED ANSWERS/ ALREADY GRADED A+
(MOST RECENT!!)
1. Which agency is primarily responsible for enforcing
workplace safety standards in Alabama?
A) EPA
B) OSHA
C) DOT
D) FEMA
Correct Answer: B
Rationale: The Occupational Safety and Health Administration
(OSHA) is the federal agency responsible for enforcing
workplace safety standards, including in Alabama. Alabama
operates under federal OSHA rather than having a state-run
plan.
2. The OSHA 300 log is used to record:
A) Employee schedules
1
,B) Work-related injuries and illnesses
C) Equipment inspections
D) Payroll data
Correct Answer: B
Rationale: The OSHA 300 log is a confidential form used by
employers to record and classify work-related injuries and
illnesses. It must be maintained for five years and posted
annually from February 1 to April 30.
3. The recommended minimum approach distance for live
electrical parts under 50 volts is:
A) 10 feet
B) 3 feet
C) No minimum but caution required
D) 6 feet
Correct Answer: C
Rationale: Electrical parts under 50 volts generally do not
require a specific minimum approach distance, but caution is still
required. However, circuits over 600 volts require specific
approach distances based on voltage levels.
2
,4. A "near miss" is best defined as:
A) A small injury
B) An incident that could have caused injury or damage but did
not
C) A minor violation
D) A defective tool
Correct Answer: B
Rationale: A "near miss" is an unplanned event that results in no
injury or damage but had the potential to do so. Reporting near
misses is a key component of proactive safety programs because
they provide opportunities to prevent future incidents.
5. Class C fires involve:
A) Wood and paper
B) Flammable liquids
C) Electrical equipment
D) Metal fires
Correct Answer: C
3
, Rationale: Class C fires involve energized electrical equipment.
Class A involves ordinary combustibles (wood, paper), Class B
involves flammable liquids, and Class D involves combustible
metals.
6. Hearing protection is required at or above which noise level
for an 8-hour shift?
A) 75 dB
B) 80 dB
C) 85 dB
D) 95 dB
Correct Answer: C
Rationale: OSHA requires hearing protection when noise levels
reach or exceed 85 decibels (dB) as an 8-hour time-weighted
average. A hearing conservation program must be implemented
at this threshold including annual audiograms.
7. A confined space must have which characteristic?
A) Open access
B) Natural ventilation
4