Texas Mold Assessment Consultant exam with
comprehensive questions and well elaborated
correct answers graded A+
Professional Academic Assistance Services
Services Offered
Proctored Exam Assistance
Online Class Management (Full Course Support)
Exam Preparation & Study Materials
Assignments and Coursework Support
Essays and Research Papers
Discussion Posts and Replies
the Texas mold assessment and remediation rules states that notice signs must be legible from - correct
ans:10 feet
after completing any training course required by the Texas mold assessment and remediation rules, how
long do you have to take and pass the state examination - correct ans:6 months
the assigned protection factor (PF) for an N-95 respirator is - correct ans:there is no PF rating for an N-95
respirator
,According to the EPA"mold remediation in schools and commercial buildings" document, the EPA
recommends the following for cleanup of books and papers that were damaged with clear water within
24-48 hours - correct ans:discard all books and papers, photocopy and discard originals, and freeze or
freeze-dry originals
when sampling with a spore trap you are usually trying to determine - correct ans:identification of viable
mild spores
which of the following sampling devices would you use to determine respirable and non-respirable
viable airborne mold spores? - correct ans:air-o-cell cassette
according to the Texas mold assessment and remediation rules, if a contractor is working under the
exceptions and exemptions subsection and identifies additional mold that affects a total surface area of
more than 25 contiguous square feet they shall - correct ans:Immediately cease all remediation work
and implement emergency containment if necessary
according to the Texas mold assessment and remediation rules, a containment area is defined as -
correct ans:an area that has been enclosed to control the release of mold or mold-containing vapors
into the surrounding area
a musty odor indoors usually indicates - correct ans:microbial growth
skin and eye protection during the remediation process is used to protect workers from - correct
ans:mold toxins and spores, dust mites, and cleaning products
according to the Texas mold assessment and remediation rules the required clearance level of mold
spores is - correct ans:N/A
which sampling method would you use to determine both viable and non- viable mold concentrations in
the air - correct ans:air-o-cell-cassette
, according to the EPA's "mold remediation in schools and commercial buildings" document, the EPA
recommends the following for cleanup for non-porous hard surface areas - correct ans:cleaned with
detergent solution
what is the normal air flow rate an air-o-cell cassette - correct ans:15 liters/minute
according to the. EPA's "mold remediation in schools and commercial buildings", it is recommended that
water damaged cellulose ceiling tiles should. be - correct ans:discarded
what is the normal air flow rater used for an Andersen sampler - correct ans:28.3 liters/minute
according to the Texas mold assessment and remediation rules, who can write a mold management
plan? - correct ans:a licensed mold assessment consultant
according to the Texas mold assessment and remediation rules, a mold assessment consultant may
perform an assessment to - correct ans:collect data for writing a mold assessment report
health effects from inhalation of mold spores could be - correct ans:Hypersensitivity pneumonitis
according to the Texas mold assessment and remediation rules, mold is defines as - correct ans:spores,
hyphae, mycotoxins, and living or dead fungi
according to the Texas mold assessment and remediation rules, the purpose of a mold assessment is to -
correct ans:determine the sources, locations and extent of mold growth in a building / determine the
condition(s) that caused the mold growth / and enable the assessment consultant to prepare a mold
remediation protocol
according to the Texas mold assessment and remediation rules, a licensed mold assessment company or
consultant shall maintain records until - correct ans:the company or consultant issues a mold
assessment report, management plan, or remediation protocol to a client, if the company or consultant
performs. only the initial assessment for the project / the company or consultant issues the final. status
report to the client, if a. final status report is issued / and the company or consultant provides the.
signed. certificate of mold remediation to a mold remediation contractor or company, if a certificate of
mold remediation is provided
comprehensive questions and well elaborated
correct answers graded A+
Professional Academic Assistance Services
Services Offered
Proctored Exam Assistance
Online Class Management (Full Course Support)
Exam Preparation & Study Materials
Assignments and Coursework Support
Essays and Research Papers
Discussion Posts and Replies
the Texas mold assessment and remediation rules states that notice signs must be legible from - correct
ans:10 feet
after completing any training course required by the Texas mold assessment and remediation rules, how
long do you have to take and pass the state examination - correct ans:6 months
the assigned protection factor (PF) for an N-95 respirator is - correct ans:there is no PF rating for an N-95
respirator
,According to the EPA"mold remediation in schools and commercial buildings" document, the EPA
recommends the following for cleanup of books and papers that were damaged with clear water within
24-48 hours - correct ans:discard all books and papers, photocopy and discard originals, and freeze or
freeze-dry originals
when sampling with a spore trap you are usually trying to determine - correct ans:identification of viable
mild spores
which of the following sampling devices would you use to determine respirable and non-respirable
viable airborne mold spores? - correct ans:air-o-cell cassette
according to the Texas mold assessment and remediation rules, if a contractor is working under the
exceptions and exemptions subsection and identifies additional mold that affects a total surface area of
more than 25 contiguous square feet they shall - correct ans:Immediately cease all remediation work
and implement emergency containment if necessary
according to the Texas mold assessment and remediation rules, a containment area is defined as -
correct ans:an area that has been enclosed to control the release of mold or mold-containing vapors
into the surrounding area
a musty odor indoors usually indicates - correct ans:microbial growth
skin and eye protection during the remediation process is used to protect workers from - correct
ans:mold toxins and spores, dust mites, and cleaning products
according to the Texas mold assessment and remediation rules the required clearance level of mold
spores is - correct ans:N/A
which sampling method would you use to determine both viable and non- viable mold concentrations in
the air - correct ans:air-o-cell-cassette
, according to the EPA's "mold remediation in schools and commercial buildings" document, the EPA
recommends the following for cleanup for non-porous hard surface areas - correct ans:cleaned with
detergent solution
what is the normal air flow rate an air-o-cell cassette - correct ans:15 liters/minute
according to the. EPA's "mold remediation in schools and commercial buildings", it is recommended that
water damaged cellulose ceiling tiles should. be - correct ans:discarded
what is the normal air flow rater used for an Andersen sampler - correct ans:28.3 liters/minute
according to the Texas mold assessment and remediation rules, who can write a mold management
plan? - correct ans:a licensed mold assessment consultant
according to the Texas mold assessment and remediation rules, a mold assessment consultant may
perform an assessment to - correct ans:collect data for writing a mold assessment report
health effects from inhalation of mold spores could be - correct ans:Hypersensitivity pneumonitis
according to the Texas mold assessment and remediation rules, mold is defines as - correct ans:spores,
hyphae, mycotoxins, and living or dead fungi
according to the Texas mold assessment and remediation rules, the purpose of a mold assessment is to -
correct ans:determine the sources, locations and extent of mold growth in a building / determine the
condition(s) that caused the mold growth / and enable the assessment consultant to prepare a mold
remediation protocol
according to the Texas mold assessment and remediation rules, a licensed mold assessment company or
consultant shall maintain records until - correct ans:the company or consultant issues a mold
assessment report, management plan, or remediation protocol to a client, if the company or consultant
performs. only the initial assessment for the project / the company or consultant issues the final. status
report to the client, if a. final status report is issued / and the company or consultant provides the.
signed. certificate of mold remediation to a mold remediation contractor or company, if a certificate of
mold remediation is provided
