NEIEP 200 Final Review
QUESTIONS AND VERIFIED
CORRECT ANSWERS
[LATEST] GRADED A+ 100%
GUARANTEES SUCCESS
The distance between the counterweight buffer strike plate and the striking surface of the
counterweight buffer when the car floor is level with the top terminal landing is known as -
CORRECT ANSWER-Runby
What type of wrench is used to align the holes for rail installation? - CORRECT ANSWER-Spud
Wrench
Which of the following wrenches is used to thread pipes with polished surfaces together? -
CORRECT ANSWER-Strap Wrench
Which of the following statements applies to the use of a hacksaw on the job? - CORRECT
ANSWER-Hacksaw blades must be installed with the teeth facing forward.
The operation of the down final limit switch will prevent movement of the car by normal
operating devices in ... - CORRECT ANSWER-both directions of travel
Which of the following statements is correct regarding ladders? - CORRECT ANSWER-Metal
ladders should never be used
, What safety precaution is most important when using rollers to move heavy equipment? -
CORRECT ANSWER-Pipe rollers must be picked up by the hollow inner pan
What are two things a compound mitre saw does best at the same time? - CORRECT ANSWER-
Bevel and mitre cuts can be made at the same time.
When the pit down final limit switch is actuated, the car... - CORRECT ANSWER-Will not run at
all
Why do we use laminated glass in the walls of glass elevator cabs? - CORRECT ANSWER-If the
glass cracks the plastic interlayer holds the fragments.
For carpet installation, if the cab area measures 94 inches by 62 inches and you need an
additional six inches on each side to account for waste during cutting, how many square yards
of carpet do you need for this job? - CORRECT ANSWER-6
Which is an advantage of lang lay ropes over regular lay ropes? - CORRECT ANSWER-They are
more flexible
Tension on the governor rope is maintained by using a - CORRECT ANSWER-Tension Sheave
A reference mark from which vertical measurements are made is known as a - CORRECT
ANSWER-Bench Mark
If the compensating sheave diameter is smaller than the distance between the car and
counterweight compensating rope hitches, the plumb lead of the compensating rope from the
compensating sheave should be from the - CORRECT ANSWER-Counterweight
The location of the governor tension sheave is determined... - CORRECT ANSWER-from the final
layout drawing
QUESTIONS AND VERIFIED
CORRECT ANSWERS
[LATEST] GRADED A+ 100%
GUARANTEES SUCCESS
The distance between the counterweight buffer strike plate and the striking surface of the
counterweight buffer when the car floor is level with the top terminal landing is known as -
CORRECT ANSWER-Runby
What type of wrench is used to align the holes for rail installation? - CORRECT ANSWER-Spud
Wrench
Which of the following wrenches is used to thread pipes with polished surfaces together? -
CORRECT ANSWER-Strap Wrench
Which of the following statements applies to the use of a hacksaw on the job? - CORRECT
ANSWER-Hacksaw blades must be installed with the teeth facing forward.
The operation of the down final limit switch will prevent movement of the car by normal
operating devices in ... - CORRECT ANSWER-both directions of travel
Which of the following statements is correct regarding ladders? - CORRECT ANSWER-Metal
ladders should never be used
, What safety precaution is most important when using rollers to move heavy equipment? -
CORRECT ANSWER-Pipe rollers must be picked up by the hollow inner pan
What are two things a compound mitre saw does best at the same time? - CORRECT ANSWER-
Bevel and mitre cuts can be made at the same time.
When the pit down final limit switch is actuated, the car... - CORRECT ANSWER-Will not run at
all
Why do we use laminated glass in the walls of glass elevator cabs? - CORRECT ANSWER-If the
glass cracks the plastic interlayer holds the fragments.
For carpet installation, if the cab area measures 94 inches by 62 inches and you need an
additional six inches on each side to account for waste during cutting, how many square yards
of carpet do you need for this job? - CORRECT ANSWER-6
Which is an advantage of lang lay ropes over regular lay ropes? - CORRECT ANSWER-They are
more flexible
Tension on the governor rope is maintained by using a - CORRECT ANSWER-Tension Sheave
A reference mark from which vertical measurements are made is known as a - CORRECT
ANSWER-Bench Mark
If the compensating sheave diameter is smaller than the distance between the car and
counterweight compensating rope hitches, the plumb lead of the compensating rope from the
compensating sheave should be from the - CORRECT ANSWER-Counterweight
The location of the governor tension sheave is determined... - CORRECT ANSWER-from the final
layout drawing
