1|Page
California Roofing Contractor Exam ACTUAL
VERIFIED QUESTIONS AND ANSWERS LATEST
UPDATE.pdf
Minimum Vertical Clearance for Freeways and
Expressways, Overlay projects shall be: - Answer-16 feet
Concrete poured for curbs and sidewalks must
contain____________pounds of cement material per
cubic yard - Answer-463 lbs/cu yard. This concrete is
minor concrete
The specified spacing of construction joints for concrete
curbs and sidewalks where there is no adjacent curb
is________ - Answer-60'
While executing a contract the Contractor must furnish the
following document in writing - Answer-Test results
In a unit-priced based bid contract the billing is based on -
Answer-Items on which the work is done
,2|Page
The contractor needs to submit the detailed cost data for a
unit price adjustment for a bid item if - Answer-The
engineer requests the data.
You request a unit price adjustment resulting from a
change of more than 25% in the bid items quantity.
There is a major change in scope.
Critical Path Method is used to schedule the projects. This
is the path along which all the project activities have -
Answer-0 float
For areas that require pavement smoothness determined
using a 12 foot straightedge, the pavement surface must
not vary from the lower edge of the straightedge by more
than: - Answer-0.01' when the straightedge is laid parallel
with the centerline.
0.02: when the straightedge is laid perpendicular to the
centerline and extends from edge to edge of a traffic lane.
0.02' when the straightedge is lad within 24' of a pavement
conform.
Clearing and grubbing consists of removing objectionable
material from - Answer-Construction area
,3|Page
Standards that are essential to produce a complete,
concise and legal set of project plans are - Answer-
Mandatory (shall and must)
Which are the factors used in determining the travel
width? - Answer-Traffic, present and future.
Number of lanes.
Terrain
The limiting axle load on a bridge with single axle
pneumatic tired truck with trailer is - Answer-28,000 lbs
A sign panel for a portable sign must comply with which of
the following material specifications? - Answer-Type VI,
retroreflective, elastomeric roll-up fabric.
Nonretroreflective, cotton, drill fabric.
Nonretroreflective, flexible, industrial, nylon fabric.
What is the diameter of the rebar if bar #16 is used -
Answer-16x0.125=2.0" 2.0"
, 4|Page
Anchor bolts are generally used to connect the steel plates
with concrete or masonry. The nominal diamter used for
the anchor bolt is: - Answer-0.25" 1/4"
Cost baseline refers to _ - Answer-The approved time
phased plan
Historical cost estimate includes - Answer-E-base
Bid Tabs Professional
Unit Bid Analysis
When preparing the projects Basis of Estimate, one
should follow: - Answer-Visit the site.
Review all the project design parameters
Involve the team
The purpose of reviewing the Base Estimate is to_ -
Answer-Ensure all the scope is included
Assumptions included are right
Historical data used is correct
California Roofing Contractor Exam ACTUAL
VERIFIED QUESTIONS AND ANSWERS LATEST
UPDATE.pdf
Minimum Vertical Clearance for Freeways and
Expressways, Overlay projects shall be: - Answer-16 feet
Concrete poured for curbs and sidewalks must
contain____________pounds of cement material per
cubic yard - Answer-463 lbs/cu yard. This concrete is
minor concrete
The specified spacing of construction joints for concrete
curbs and sidewalks where there is no adjacent curb
is________ - Answer-60'
While executing a contract the Contractor must furnish the
following document in writing - Answer-Test results
In a unit-priced based bid contract the billing is based on -
Answer-Items on which the work is done
,2|Page
The contractor needs to submit the detailed cost data for a
unit price adjustment for a bid item if - Answer-The
engineer requests the data.
You request a unit price adjustment resulting from a
change of more than 25% in the bid items quantity.
There is a major change in scope.
Critical Path Method is used to schedule the projects. This
is the path along which all the project activities have -
Answer-0 float
For areas that require pavement smoothness determined
using a 12 foot straightedge, the pavement surface must
not vary from the lower edge of the straightedge by more
than: - Answer-0.01' when the straightedge is laid parallel
with the centerline.
0.02: when the straightedge is laid perpendicular to the
centerline and extends from edge to edge of a traffic lane.
0.02' when the straightedge is lad within 24' of a pavement
conform.
Clearing and grubbing consists of removing objectionable
material from - Answer-Construction area
,3|Page
Standards that are essential to produce a complete,
concise and legal set of project plans are - Answer-
Mandatory (shall and must)
Which are the factors used in determining the travel
width? - Answer-Traffic, present and future.
Number of lanes.
Terrain
The limiting axle load on a bridge with single axle
pneumatic tired truck with trailer is - Answer-28,000 lbs
A sign panel for a portable sign must comply with which of
the following material specifications? - Answer-Type VI,
retroreflective, elastomeric roll-up fabric.
Nonretroreflective, cotton, drill fabric.
Nonretroreflective, flexible, industrial, nylon fabric.
What is the diameter of the rebar if bar #16 is used -
Answer-16x0.125=2.0" 2.0"
, 4|Page
Anchor bolts are generally used to connect the steel plates
with concrete or masonry. The nominal diamter used for
the anchor bolt is: - Answer-0.25" 1/4"
Cost baseline refers to _ - Answer-The approved time
phased plan
Historical cost estimate includes - Answer-E-base
Bid Tabs Professional
Unit Bid Analysis
When preparing the projects Basis of Estimate, one
should follow: - Answer-Visit the site.
Review all the project design parameters
Involve the team
The purpose of reviewing the Base Estimate is to_ -
Answer-Ensure all the scope is included
Assumptions included are right
Historical data used is correct
