1|Page
NICET Construction Materials Testing – Soils Level II
exam COMPLETE VERIFIED QUESTIONS AND
DETAILED SOLUTIONS LATEST UPDATE THIS YEAR-
NEWEST EXAM!!!.pdf
An inspection company is performing its first inspection of
an existing warehouse owned by a new client. The
warehouse has rack storage with large sprinklers near the
roof. The spare sprinkler cabinet is empty. The sprinklers
near the roof are within 20 to 28 inches from the top of the
storage. After noting that the sprinkler cabinet needs to be
replenished, what should be recommended?
call for an engineering evaluation
have the storage moved down to a 36-inch clearance
have the storage moved down to a 48-inch clearance
no further action is needed; the head clearance is correct -
Answer-a?
During a 5-year internal inspection on an alarm valve,
what areas or devices will the inspector inspect?
airline strainer and air compressor drip legs
clapper, trim ports, and water motor gong assembly
FDC caps, swivels, and piping and check valves
,2|Page
strainers, filters, and restriction orifices - Answer-d
What are the acceptable limits for a gauge having a 200
psi maximum radius installed on a system with a 60 psi
normal pressure?
between 50 psi and 55 psi
between 54 psi and 66 psi
between 55 psi and 65 psi
between 58 psi and 66 psi - Answer-b
How frequent shall the operating stem of an outside screw
and yoke (OS&Y) valve be lubricated?
quarterly
annually
every 2 years
when necessary due to the conditions - Answer-b
When pre-planning impairments, the inspector shall first
coordinate with whom?
fire marshal
impairment coordinator
,3|Page
insurance carrier
police department - Answer-b
When performing a semi-annual inspection on a pre-action
system, how should the water flow alarm device be
tested?
because of the nature of the type of system, water flow
alarm devices do not need to be tested on pre-action
systems
by taking off the cover of the device and manually
activating it
through the by-pass connection on the valve
through the inspector's test connection - Answer-d?
How frequently does a full trip test of a dry valve need to
be performed?
annually
each year when a full flow test is not mandatory
every 3 years
every 5 years - Answer-c
, 4|Page
A pre-action deluge valve has no exterior reset. How often
do this valve and its detection devices need to be
inspected?
monthly
quarterly
semi-annually
annually - Answer-d
Per NPFA 72, which type of system receives an alarm
from a fire alarm box, then retransmits it to fire stations,
either manually or automatically?
proprietary supervising station
remote supervising station
type A public fire alarm reporting system
type B public fire alarm reporting system - Answer-a?
Which set of documentation is required to be maintained
and retained for the life of the system?
as built drawings, hydraulic calculations, original
acceptance test records, and device manufacturer's data
sheets
as built drawings, hydraulic data plate, and annual
maintenance and test records
NICET Construction Materials Testing – Soils Level II
exam COMPLETE VERIFIED QUESTIONS AND
DETAILED SOLUTIONS LATEST UPDATE THIS YEAR-
NEWEST EXAM!!!.pdf
An inspection company is performing its first inspection of
an existing warehouse owned by a new client. The
warehouse has rack storage with large sprinklers near the
roof. The spare sprinkler cabinet is empty. The sprinklers
near the roof are within 20 to 28 inches from the top of the
storage. After noting that the sprinkler cabinet needs to be
replenished, what should be recommended?
call for an engineering evaluation
have the storage moved down to a 36-inch clearance
have the storage moved down to a 48-inch clearance
no further action is needed; the head clearance is correct -
Answer-a?
During a 5-year internal inspection on an alarm valve,
what areas or devices will the inspector inspect?
airline strainer and air compressor drip legs
clapper, trim ports, and water motor gong assembly
FDC caps, swivels, and piping and check valves
,2|Page
strainers, filters, and restriction orifices - Answer-d
What are the acceptable limits for a gauge having a 200
psi maximum radius installed on a system with a 60 psi
normal pressure?
between 50 psi and 55 psi
between 54 psi and 66 psi
between 55 psi and 65 psi
between 58 psi and 66 psi - Answer-b
How frequent shall the operating stem of an outside screw
and yoke (OS&Y) valve be lubricated?
quarterly
annually
every 2 years
when necessary due to the conditions - Answer-b
When pre-planning impairments, the inspector shall first
coordinate with whom?
fire marshal
impairment coordinator
,3|Page
insurance carrier
police department - Answer-b
When performing a semi-annual inspection on a pre-action
system, how should the water flow alarm device be
tested?
because of the nature of the type of system, water flow
alarm devices do not need to be tested on pre-action
systems
by taking off the cover of the device and manually
activating it
through the by-pass connection on the valve
through the inspector's test connection - Answer-d?
How frequently does a full trip test of a dry valve need to
be performed?
annually
each year when a full flow test is not mandatory
every 3 years
every 5 years - Answer-c
, 4|Page
A pre-action deluge valve has no exterior reset. How often
do this valve and its detection devices need to be
inspected?
monthly
quarterly
semi-annually
annually - Answer-d
Per NPFA 72, which type of system receives an alarm
from a fire alarm box, then retransmits it to fire stations,
either manually or automatically?
proprietary supervising station
remote supervising station
type A public fire alarm reporting system
type B public fire alarm reporting system - Answer-a?
Which set of documentation is required to be maintained
and retained for the life of the system?
as built drawings, hydraulic calculations, original
acceptance test records, and device manufacturer's data
sheets
as built drawings, hydraulic data plate, and annual
maintenance and test records
