© Academic_Excellence
Indiana Journeyman Bricklayer | Exam Practice Questions And
Correct Answers (Verified Answers) Plus Rationale 2026 Q&A |
Instant Download Pdf
1. What is the standard size of a modular brick?
A. 7 5/8" x 2 1/4" x 3 1/2"
B. 7 5/8" x 2 1/4" x 3 5/8"
C. 8" x 2 1/2" x 4"
D. 6" x 2" x 3"
The correct answer is 7 5/8" x 2 1/4" x 3 5/8" because it is the standard modular brick
size used in U.S. construction.
2. What is the purpose of mortar in bricklaying?
A. Strengthen bricks
B. Bond bricks and seal joints
C. Add color
D. Reduce weight
The correct answer is Bond bricks and seal joints because mortar holds units
together and prevents water penetration.
3. What is the typical thickness of a mortar joint?
A. 1/8 inch
B. 3/8 inch
C. 1 inch
D. 1/2 inch
The correct answer is 3/8 inch because standard masonry joints are designed for this
thickness.
,© Academic_Excellence
4. Which mortar type has the highest compressive strength?
A. Type O
B. Type N
C. Type M
D. Type K
The correct answer is Type M because it has the highest strength and is used for
heavy loads.
5. What tool is used to spread mortar?
A. Level
B. Trowel
C. Joiner
D. Hammer
The correct answer is Trowel because it is specifically designed to apply and shape
mortar.
6. What is a “course” in bricklaying?
A. Tool
B. Horizontal row of bricks
C. Vertical joint
D. Mortar mix
The correct answer is Horizontal row of bricks because courses build up the wall
layer by layer.
7. What is a “header”?
, © Academic_Excellence
A. Long side of brick
B. Brick laid with short end exposed
C. Mortar joint
D. Tool
The correct answer is Brick laid with short end exposed because headers tie walls
together.
8. What is a “stretcher”?
A. Tool
B. Brick laid with long face exposed
C. Mortar type
D. Joint
The correct answer is Brick laid with long face exposed because stretchers form the
visible surface.
9. What is a “bond” pattern?
A. Mortar type
B. Arrangement of bricks in a wall
C. Tool
D. Measurement
The correct answer is Arrangement of bricks in a wall because bond patterns
improve strength and appearance.
10. What is running bond?
A. Vertical pattern
B. Offset stretcher pattern
C. Header pattern
Indiana Journeyman Bricklayer | Exam Practice Questions And
Correct Answers (Verified Answers) Plus Rationale 2026 Q&A |
Instant Download Pdf
1. What is the standard size of a modular brick?
A. 7 5/8" x 2 1/4" x 3 1/2"
B. 7 5/8" x 2 1/4" x 3 5/8"
C. 8" x 2 1/2" x 4"
D. 6" x 2" x 3"
The correct answer is 7 5/8" x 2 1/4" x 3 5/8" because it is the standard modular brick
size used in U.S. construction.
2. What is the purpose of mortar in bricklaying?
A. Strengthen bricks
B. Bond bricks and seal joints
C. Add color
D. Reduce weight
The correct answer is Bond bricks and seal joints because mortar holds units
together and prevents water penetration.
3. What is the typical thickness of a mortar joint?
A. 1/8 inch
B. 3/8 inch
C. 1 inch
D. 1/2 inch
The correct answer is 3/8 inch because standard masonry joints are designed for this
thickness.
,© Academic_Excellence
4. Which mortar type has the highest compressive strength?
A. Type O
B. Type N
C. Type M
D. Type K
The correct answer is Type M because it has the highest strength and is used for
heavy loads.
5. What tool is used to spread mortar?
A. Level
B. Trowel
C. Joiner
D. Hammer
The correct answer is Trowel because it is specifically designed to apply and shape
mortar.
6. What is a “course” in bricklaying?
A. Tool
B. Horizontal row of bricks
C. Vertical joint
D. Mortar mix
The correct answer is Horizontal row of bricks because courses build up the wall
layer by layer.
7. What is a “header”?
, © Academic_Excellence
A. Long side of brick
B. Brick laid with short end exposed
C. Mortar joint
D. Tool
The correct answer is Brick laid with short end exposed because headers tie walls
together.
8. What is a “stretcher”?
A. Tool
B. Brick laid with long face exposed
C. Mortar type
D. Joint
The correct answer is Brick laid with long face exposed because stretchers form the
visible surface.
9. What is a “bond” pattern?
A. Mortar type
B. Arrangement of bricks in a wall
C. Tool
D. Measurement
The correct answer is Arrangement of bricks in a wall because bond patterns
improve strength and appearance.
10. What is running bond?
A. Vertical pattern
B. Offset stretcher pattern
C. Header pattern
