PJM TEST ACTUAL 2026 QUESTIONS AND
VERIFIED ANSWERS
Save
Terms in this set (191)
Which of the following balancing Tie-Line Bias
control modes is used by PJM
under normal operations?
Which of the following influences Weather Conditions & Day of the Week
does PJM consider when
performing their system load
forecast?
All of the following are limits that Dynamic Instability
must be submitted to PJM for
generating units EXCEPT:
1. Eco Min
2. Eco Max
3. Emergency Max
4. Dynamic Instability
,If PJM experienced an event that Synch Reserve
caused the loss of a 1,000 MW
generator, which of the following
would most likely provide the
quickest impact to improve the
undegenerating Area Control Area
(ACE)?
1. Remedial Action Reserve
2. Synch Reserve
3. Non-Synch Reserve
4. Secondary Reserve
Your system has experienced an A generator on your system tripped offline
event that caused the frequency to
drop below 60.00 Hz, what would
be the most likely event that
occurred?
How does the PJM dispatcher All-Call
inform the Members of the PJM
regulation Requirements?
In order for your generator to 5 minutes
quality to supply regulation in the
PJM Regulation market, it must be
able to respond and attain its
desired output within how many
minutes?
Based on a generator capability decrease the MW output of the unit
curve, in order to maximize the
MVAR output of the generator, it
may be necessary to:
, PJM maintains a regulation quality 75%
standard which states that a
generator may be certified to
provide regulation only after it
achieves three consecutive
regulation test scores of at least
Which of the following would NOT loss of adjacent control area generation
be a cause for a sudden deviation in
the balancing area ACE?
1. incorrect interchange number
2. loss of a tie-line RTU
3. loss of internal load
4. loss of adjacent control area
generation
The primary purpose for the small deviations in load
balancing area to have Regulation
is to correct for:
It is necessary for Generation as soon as practicable
Owner dispatchers to notify PJM of
unplanned unit outages:
PJM should be made aware of any extreme hot or cold conditions
fuel shortage that a generator may
experience.
This information assists in analyzing
the resources and reliably
operating the system. A heightened
awareness is expected during:
VERIFIED ANSWERS
Save
Terms in this set (191)
Which of the following balancing Tie-Line Bias
control modes is used by PJM
under normal operations?
Which of the following influences Weather Conditions & Day of the Week
does PJM consider when
performing their system load
forecast?
All of the following are limits that Dynamic Instability
must be submitted to PJM for
generating units EXCEPT:
1. Eco Min
2. Eco Max
3. Emergency Max
4. Dynamic Instability
,If PJM experienced an event that Synch Reserve
caused the loss of a 1,000 MW
generator, which of the following
would most likely provide the
quickest impact to improve the
undegenerating Area Control Area
(ACE)?
1. Remedial Action Reserve
2. Synch Reserve
3. Non-Synch Reserve
4. Secondary Reserve
Your system has experienced an A generator on your system tripped offline
event that caused the frequency to
drop below 60.00 Hz, what would
be the most likely event that
occurred?
How does the PJM dispatcher All-Call
inform the Members of the PJM
regulation Requirements?
In order for your generator to 5 minutes
quality to supply regulation in the
PJM Regulation market, it must be
able to respond and attain its
desired output within how many
minutes?
Based on a generator capability decrease the MW output of the unit
curve, in order to maximize the
MVAR output of the generator, it
may be necessary to:
, PJM maintains a regulation quality 75%
standard which states that a
generator may be certified to
provide regulation only after it
achieves three consecutive
regulation test scores of at least
Which of the following would NOT loss of adjacent control area generation
be a cause for a sudden deviation in
the balancing area ACE?
1. incorrect interchange number
2. loss of a tie-line RTU
3. loss of internal load
4. loss of adjacent control area
generation
The primary purpose for the small deviations in load
balancing area to have Regulation
is to correct for:
It is necessary for Generation as soon as practicable
Owner dispatchers to notify PJM of
unplanned unit outages:
PJM should be made aware of any extreme hot or cold conditions
fuel shortage that a generator may
experience.
This information assists in analyzing
the resources and reliably
operating the system. A heightened
awareness is expected during:
