ISYE 6644 - FINAL PREP2 CORRECT
QUESTIONS & ANSWERS(RATED
A+)
If f(x, y) = cxy for all 0 < x < 1 and 1 < y < 2, where c is whatever value makes this
thing integrate to 1, then X and Y are independent random variables -
ANSWERTRUE. (Because f(x, y) = a(x)b(y) factors nicely, and there are no funny
limits.)
In our Arena Call Center example, it was possible for entities to be left in the system
when it shut down at 7:00 p.m. (even though we stopped allowing customers to enter
the system at 6:00 p.m.). - ANSWERTRUE — because of the small chance that a
callback will occur.
An entity can be scheduled to visit the same resource twice, with different service
time distributions on the two visits! - ANSWERTRUE
Arena has a built-in Input Analyzer tool that allows for the fitting of certain
distributions to data. - ANSWERTRUE
The Kolmogorov-Smirnov test can be used both to see (i) if data seem to fit to a
particular hypothesized distribution and (ii) if the data are independent. -
ANSWERFALSE. (It's just a goodness-of-fit test.)
Welch's method is a graphical technique to estimate truncation (initialization bias)
points for steady-state simulation. - ANSWERTRUE
If you are using a ranking-and-selection procedure and two competitors happen to
fall within the indifference-zone, then you don't really care too much which one you
end up selecting. - ANSWERTRUE. That's why it's called the IZ!
TRUE or FALSE? Sequential ranking-and-selection procedures are designed to stop
early if one alternative seems to be way out in front of the others. - ANSWERTRUE
Suppose X is a discrete random variable that can take on four possible values: −0.1,
0, 2, and 4. The associated probabilities are, respectively: 0.3, 0.1, 0.2, and 0.4. Find
an expression in Arena to generate one observation coming from this p.m.f. -
ANSWERDISC(0.3, −0.1, 0.4, 0, 0.6, 2, 1, 4)
DISC(F(x1), x1, F(x2), x2, . . .)
Suppose there are 3 people in the line called joe.queue and 5 people in the line
called tom.queue. What is the value of the following Arena expression?
(NQ(joe.queue) > NQ(tom.queue)) + (TNOW >= 0 - ANSWERThe logical expression
(NQ(joe.queue) > NQ(tom.queue)) is false (because 3 ≤ 5) and therefore 0. The
, logical expression (TNOW >= 0) is always true (since time is always at least 0) and
therefore 1. Thus, 0 + 1 = 1
Suppose, when designing a ranking-and-selection procedure, you have decided to
increase the desired probability of correct selection compared to a previous run of
the procedure. What can you expect? (a) Sample sizes that are about the same
(b) Larger sample sizes
(c) Somewhat lower achieved Pr(CS)
(d) A larger indifference zone
(e) Lower confidence in your selection - ANSWERb
In Arena, you can use a single DECIDE module to route customers to that one of
four servers having the smallest queue. - ANSWERTRUE
TRUE or FALSE? In Arena, you can use the expression EXPO(3) to generate
exponential interarrival times having a mean of 1/3. - ANSWERFALSE. The mean of
an EXPO(3) is 3.
TRUE or FALSE? In Arena, an alternative expression to generate exponential
interarrival times having a mean of 1/3 is -(1/3)*LN(UNIF(0,1)) - ANSWERTRUE.
This is the Inverse Transform Method to generate an observation coming from Exp(λ
= 3).
TRUE or FALSE? In Arena, it is possible to set the maximum capacity of a queue
from within a SEIZE module. - ANSWERFALSE. It is only possible to set a maximum
queue capacity from within a QUEUE block found in the Blocks template. 2
TRUE or FALSE? In Arena, the expression NORM(-1,2)+NORM(3,2) has the same
distribution as the expression NORM(2,4) - ANSWERFALSE. The above expression
evaluates to NORM(2,√ 8) since, in Arena, NORM(x,2) corresponds to a normal
random variate with a mean of x and a standard deviation of 2; so the variance of
this random variable is 22 = 4.
TRUE or FALSE? In Arena, it is only possible to use one resource at a time in a
PROCESS module. - ANSWERFALSE
TRUE or FALSE? In Arena, once an entity is defined, it is not possible to change the
priority in which it gets processed by a resource. - ANSWERFALSE
TRUE or FALSE? In Arena, it is not possible to use a single RELEASE module to
release multiple different resources - ANSWERFALSE. We observed this in the
ReleaseHospitalRoomLater demo in HW7
What is the distribution given by the Arena expression UNIF(1,2)+UNIF(1,2)? -
ANSWERTria(2,3,4).
An Arena ASSIGN module can be used to assign values to attributes and variables -
ANSWERTRUE
QUESTIONS & ANSWERS(RATED
A+)
If f(x, y) = cxy for all 0 < x < 1 and 1 < y < 2, where c is whatever value makes this
thing integrate to 1, then X and Y are independent random variables -
ANSWERTRUE. (Because f(x, y) = a(x)b(y) factors nicely, and there are no funny
limits.)
In our Arena Call Center example, it was possible for entities to be left in the system
when it shut down at 7:00 p.m. (even though we stopped allowing customers to enter
the system at 6:00 p.m.). - ANSWERTRUE — because of the small chance that a
callback will occur.
An entity can be scheduled to visit the same resource twice, with different service
time distributions on the two visits! - ANSWERTRUE
Arena has a built-in Input Analyzer tool that allows for the fitting of certain
distributions to data. - ANSWERTRUE
The Kolmogorov-Smirnov test can be used both to see (i) if data seem to fit to a
particular hypothesized distribution and (ii) if the data are independent. -
ANSWERFALSE. (It's just a goodness-of-fit test.)
Welch's method is a graphical technique to estimate truncation (initialization bias)
points for steady-state simulation. - ANSWERTRUE
If you are using a ranking-and-selection procedure and two competitors happen to
fall within the indifference-zone, then you don't really care too much which one you
end up selecting. - ANSWERTRUE. That's why it's called the IZ!
TRUE or FALSE? Sequential ranking-and-selection procedures are designed to stop
early if one alternative seems to be way out in front of the others. - ANSWERTRUE
Suppose X is a discrete random variable that can take on four possible values: −0.1,
0, 2, and 4. The associated probabilities are, respectively: 0.3, 0.1, 0.2, and 0.4. Find
an expression in Arena to generate one observation coming from this p.m.f. -
ANSWERDISC(0.3, −0.1, 0.4, 0, 0.6, 2, 1, 4)
DISC(F(x1), x1, F(x2), x2, . . .)
Suppose there are 3 people in the line called joe.queue and 5 people in the line
called tom.queue. What is the value of the following Arena expression?
(NQ(joe.queue) > NQ(tom.queue)) + (TNOW >= 0 - ANSWERThe logical expression
(NQ(joe.queue) > NQ(tom.queue)) is false (because 3 ≤ 5) and therefore 0. The
, logical expression (TNOW >= 0) is always true (since time is always at least 0) and
therefore 1. Thus, 0 + 1 = 1
Suppose, when designing a ranking-and-selection procedure, you have decided to
increase the desired probability of correct selection compared to a previous run of
the procedure. What can you expect? (a) Sample sizes that are about the same
(b) Larger sample sizes
(c) Somewhat lower achieved Pr(CS)
(d) A larger indifference zone
(e) Lower confidence in your selection - ANSWERb
In Arena, you can use a single DECIDE module to route customers to that one of
four servers having the smallest queue. - ANSWERTRUE
TRUE or FALSE? In Arena, you can use the expression EXPO(3) to generate
exponential interarrival times having a mean of 1/3. - ANSWERFALSE. The mean of
an EXPO(3) is 3.
TRUE or FALSE? In Arena, an alternative expression to generate exponential
interarrival times having a mean of 1/3 is -(1/3)*LN(UNIF(0,1)) - ANSWERTRUE.
This is the Inverse Transform Method to generate an observation coming from Exp(λ
= 3).
TRUE or FALSE? In Arena, it is possible to set the maximum capacity of a queue
from within a SEIZE module. - ANSWERFALSE. It is only possible to set a maximum
queue capacity from within a QUEUE block found in the Blocks template. 2
TRUE or FALSE? In Arena, the expression NORM(-1,2)+NORM(3,2) has the same
distribution as the expression NORM(2,4) - ANSWERFALSE. The above expression
evaluates to NORM(2,√ 8) since, in Arena, NORM(x,2) corresponds to a normal
random variate with a mean of x and a standard deviation of 2; so the variance of
this random variable is 22 = 4.
TRUE or FALSE? In Arena, it is only possible to use one resource at a time in a
PROCESS module. - ANSWERFALSE
TRUE or FALSE? In Arena, once an entity is defined, it is not possible to change the
priority in which it gets processed by a resource. - ANSWERFALSE
TRUE or FALSE? In Arena, it is not possible to use a single RELEASE module to
release multiple different resources - ANSWERFALSE. We observed this in the
ReleaseHospitalRoomLater demo in HW7
What is the distribution given by the Arena expression UNIF(1,2)+UNIF(1,2)? -
ANSWERTria(2,3,4).
An Arena ASSIGN module can be used to assign values to attributes and variables -
ANSWERTRUE
