Examination Question And Correct
Answers (Verified Answers) Plus
Rationales 2026 Q&A Instant Download
1. What is the primary purpose of fiber optic communication systems?
A. To transmit electrical signals over copper wire
B. To transmit light signals for high-speed data transfer
C. To store digital data permanently
D. To amplify radio frequency signals
Correct Answer: B
Rationale: Fiber optic systems use light pulses to transmit data at very
high speeds and over long distances with minimal loss, making them
superior to electrical copper-based systems in bandwidth and signal
integrity.
2. Which material is commonly used as the core of optical fiber?
A. Plastic or glass
B. Copper
C. Aluminum
D. Steel
Correct Answer: A
Rationale: The core of optical fiber is typically made from ultra-pure glass
or plastic, designed to carry light efficiently with minimal attenuation and
dispersion.
,3. What is cladding in fiber optics?
A. Protective outer jacket
B. Reflective layer surrounding the core
C. Electrical shielding
D. Connector interface
Correct Answer: B
Rationale: The cladding surrounds the core and has a lower refractive
index, ensuring total internal reflection, which keeps light signals
contained within the core.
4. What phenomenon allows light to travel through fiber optic cables?
A. Refraction
B. Diffraction
C. Total internal reflection
D. Absorption
Correct Answer: C
Rationale: Total internal reflection occurs when light reflects within the
core due to refractive index differences, enabling efficient signal
transmission.
5. Which type of fiber is best for long-distance communication?
A. Plastic optical fiber
B. Multimode fiber
C. Single-mode fiber
D. Step-index fiber
Correct Answer: C
Rationale: Single-mode fiber has a small core and allows only one light
path, reducing dispersion and enabling long-distance, high-bandwidth
communication.
6. What is the typical wavelength used in fiber optic communication?
A. 100 nm
B. 300 nm
C. 850 nm to 1550 nm
, D. 2000 nm to 3000 nm
Correct Answer: C
Rationale: Fiber optics commonly operate in infrared wavelengths
between 850 nm and 1550 nm, where attenuation is lowest.
7. What device is used to convert electrical signals into optical signals?
A. Photodetector
B. LED or laser transmitter
C. Amplifier
D. Splitter
Correct Answer: B
Rationale: LEDs and laser diodes convert electrical signals into light pulses
for transmission through optical fiber.
8. What is attenuation in fiber optics?
A. Signal amplification
B. Signal loss over distance
C. Signal reflection
D. Signal encoding
Correct Answer: B
Rationale: Attenuation refers to the reduction in signal strength as light
travels through fiber due to absorption, scattering, and bending losses.
9. What causes modal dispersion in fiber optics?
A. Different wavelengths
B. Multiple light paths in multimode fiber
C. Electrical interference
D. Connector loss
Correct Answer: B
Rationale: In multimode fiber, different light paths travel at different
speeds, causing pulse spreading and limiting bandwidth.
10.Which tool is used to measure optical power loss?
A. Multimeter
B. OTDR