Lineman D200 Tests Questions and Correct Answers
Lineman D200 Tests Questions and Correct Answers The minimum listing of rules and requirements necessary for performing work safely is found in a publication known as the: - Correct Answer Safety Manual When should a safety briefing be performed? - Correct Answer Before every job Who should conduct the safety briefing? - Correct Answer The person in charge at the job site What should be done if the scope of the work on the job site changes? - Correct Answer All workers are re-briefed Prior to climbing a pole it shall be inspected for - Correct Answer Soundness When climbing a pole that has been piked for safety, the pikes shall be - Correct Answer Manned When attaching the safety snap to the "D" ring, the climber shall - Correct Answer visually check the snap to be in the "D" ring The safety belt should not be placed - Correct Answer above the top crossarm when at the top of the pole When not in use, the climbers shall - Correct Answer have approved guards on the gaffs When climbing, you should be on the of the pole. - Correct Answer High side If there are any foreign objects on a pole you must climb, you should - Correct Answer Remove them
Geschreven voor
- Instelling
- Lineman
- Vak
- Lineman
Documentinformatie
- Geüpload op
- 9 mei 2026
- Aantal pagina's
- 15
- Geschreven in
- 2025/2026
- Type
- Tentamen (uitwerkingen)
- Bevat
- Vragen en antwoorden
Onderwerpen
-
the minimum listing of rules and requirements nece
-
when should a safety briefing be performed
-
who should conduct the safety briefing