TEXAS BOILER INSPECTOR CERTIFICATION PRACTICE EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS)
RATIONALES 2026|2027 Q&A
THIS DOCUMENT CONTAINS:
TEXAS BOILER INSPECTOR CERTIFICATION
PRACTICE EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS)
RATIONALES 2025|2026 Q&A
COMPLETE GUARANTEED PASS
COMPLETE A+ GUIDE
EACH QUESTION INCLUDES RATIONALES
https://www.stuvia.com/en-us/user/MBoffin
,QUESTIONS & VERIFIED ANSWERS
1. What is the primary purpose of a boiler inspection?
A. Improve fuel efficiency
B. Assess operator performance
C. Ensure the safe operation of the boiler
D. Reduce water usage
The main goal of inspection is to prevent hazardous conditions
and ensure the boiler operates safely.
2. According to Texas regulations, how often must high-pressure
boilers be inspected internally?
A. Every 6 months
B. Annually
C. Every 2 years
D. Every 3 years
High-pressure steam boilers require internal inspections at least
once per year.
https://www.stuvia.com/en-us/user/MBoffin
, 3. What document establishes the rules for the construction of
new boilers?
A. ASME Section II
B. NFPA 85
C. ASME Boiler and Pressure Vessel Code Section I
D. API 510
ASME Section I outlines construction requirements for power boilers.
4. What type of test is typically conducted to verify the
integrity of a repaired pressure boundary?
A. Ultrasonic Test
B. Radiographic Test
C. Hydrostatic Test
D. Magnetic Particle Test
Hydrostatic tests are standard for pressure boundary integrity
verification after repairs.
5. Which device prevents overpressure in a boiler?
A. Water level gauge
B. Blowdown valve
C. Safety valve
D. Economizer
Safety valves release steam to maintain pressure within safe limits.
6. What is the minimum size of a safety valve discharge outlet for
a 200 psi power boiler?
A. 1 inch
B. 2.5 inches
C. 3 inches
D. 4 inches
Discharge sizes are regulated based on pressure and capacity per
ASME standards.
https://www.stuvia.com/en-us/user/MBoffin
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS)
RATIONALES 2026|2027 Q&A
THIS DOCUMENT CONTAINS:
TEXAS BOILER INSPECTOR CERTIFICATION
PRACTICE EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS)
RATIONALES 2025|2026 Q&A
COMPLETE GUARANTEED PASS
COMPLETE A+ GUIDE
EACH QUESTION INCLUDES RATIONALES
https://www.stuvia.com/en-us/user/MBoffin
,QUESTIONS & VERIFIED ANSWERS
1. What is the primary purpose of a boiler inspection?
A. Improve fuel efficiency
B. Assess operator performance
C. Ensure the safe operation of the boiler
D. Reduce water usage
The main goal of inspection is to prevent hazardous conditions
and ensure the boiler operates safely.
2. According to Texas regulations, how often must high-pressure
boilers be inspected internally?
A. Every 6 months
B. Annually
C. Every 2 years
D. Every 3 years
High-pressure steam boilers require internal inspections at least
once per year.
https://www.stuvia.com/en-us/user/MBoffin
, 3. What document establishes the rules for the construction of
new boilers?
A. ASME Section II
B. NFPA 85
C. ASME Boiler and Pressure Vessel Code Section I
D. API 510
ASME Section I outlines construction requirements for power boilers.
4. What type of test is typically conducted to verify the
integrity of a repaired pressure boundary?
A. Ultrasonic Test
B. Radiographic Test
C. Hydrostatic Test
D. Magnetic Particle Test
Hydrostatic tests are standard for pressure boundary integrity
verification after repairs.
5. Which device prevents overpressure in a boiler?
A. Water level gauge
B. Blowdown valve
C. Safety valve
D. Economizer
Safety valves release steam to maintain pressure within safe limits.
6. What is the minimum size of a safety valve discharge outlet for
a 200 psi power boiler?
A. 1 inch
B. 2.5 inches
C. 3 inches
D. 4 inches
Discharge sizes are regulated based on pressure and capacity per
ASME standards.
https://www.stuvia.com/en-us/user/MBoffin
