CERTIFICATION PREPARATION WORKBOOK
COMPREHENSIVE REVIEW PACK A+
◉ The Certificate of Fitness holder Must ________? Answer: must
regulate the pressure and flow of oxygen and natural gas to each
torch.
◉ If the torch operator for jewelry manufacture involves any oxygen
with any fuel gas containers must ? Answer: the operator must be a
C of F holder.
◉ A Certificate of Fitness Holder must keep his or her certificate
where ? Answer: on their person or otherwise readily available for
inspection by any representative of the fire Department
◉ The easiest way to extinguish a fire caused by a leak is to what ?
Answer: close the shutoff valve
◉ Permits issued by the FDNY are required to conduct the following
hot work ? Answer: storing, using or handling oxygen and a
flammable gas, storing, using or handling any flammable gas (e.g.
LPG or CNG or acetylene) in excess of 400 SCF. Storing, using or
handling any oxidizing gas (e.g. oxygen) in excess of 504 SCF.
, ◉ LPG - 400 SCF is how many pounds? Answer: approximately 47
lbs
◉ Portable LPG containers that are more than 16.4 oz and CNG
containers with a capacity greater than 8.7 SCF must ? Answer: must
NOT stored, handled, or used indoors in the following occupancies
(as defined in the Building code): residential occupancies, factory
and industrial occupancies; educational occupancies; institutional
occupancies, except as the commissioner may authorize by rule
◉ Site-specific permit - may be a permanent permit or a temporary
permit. Permanent permits are valid for ? Answer: 12 months only
◉ A city-wide permit is valid for ? Answer: Up to 30 Days
◉ For Citywide hot work operations, the Owner of the premises
must be notified in writing at least _____ hours in advance prior to
work beginning ? Answer: 48 hours
◉ A class A fire extinguisher fights fires from Answer: Paper
◉ What type of fire is a Class B fire extinguisher used on? Answer:
oil