MA 2A Hoisting Exam | 108+ Questions
& Verified Answers | 100% Correct |
Grade A (2026/2027)
This MA 2A Hoisting Exam consists of approximately 108 common questions
designed to test your knowledge of safety regulations, equipment operation, and
Massachusetts General Laws. Key topics include 520 CMR 6.00 (Hoisting
Machinery Regulations) and MGL Chapter 146 Sections 53-54A.
Study guide for the 2025–2027 exams
Topic Question Correct Answer
Regulatory What governs hoisting 520 CMR 6.00 and MGL Chapter
Authority machinery in MA? 146 Section 53.
How soon must a death be
Safety Incident Within 1 hour of the incident.
reported?
How should you carry a Keep it 12-18 inches off the
Load Handling
load? ground for visibility and stability.
Equipment When can hydraulic hoses Never while they are under
Check be tightened? pressure.
Perform a "pick test": lift the load
How do you test load
Load Brakes about 1 foot and hold for one
brakes?
minute.
How close to a marked
You must hand dig within 18
Trench Safety utility can you dig with a
inches of a marked utility.
machine?
Essential Exam Categories
• Safety Protocols: Includes Lock Out Tag Out (LOTO) for de-energized
circuits and mandatory seatbelt use.
1
, • Daily Inspections: Operators must check wire ropes, bearings, gears,
friction clutches, and brakes daily.
• License Limitations: A 2A license allows the operation of excavators,
backhoes, and loaders, but excludes class 1, 3, and 4 machinery.
• Penalties: Operating without a license can result in fines from $500 to
$3,000 and/or up to 3 months in jail
Quiz_________________?
What is the purpose of the 520:C.M.R.6:00 -
Answer
To establish rules and regulations for safety of the public
Quiz_________________?
What regulatory authority governs hoisting machinery -
Answer
520-C.M.R. 6:00 MGL chapter 146 section 53-54A
Quiz_________________?
What type of system is used when working on de-energized circuit -
Answer
Lock out tag out
Quiz_________________?
2
, In event of death, department of public safety must how soon -
Answer
Within 1 hour of incident
Quiz_________________?
When are reports of injury that required hospitalization or medical treatment
sent to the engineering section of department of public safety -
Answer
Immediately After the person has been treated
Quiz_________________?
All welding and cutting on hoisting equipment must be done in accordance with
requirements of what -
Answer
American society of mechanical engineering (ASME)
Quiz_________________?
What items should be checked on daily inspection -
Answer
Wire ropes, bearings, gears, friction clutches, brakes, chain drives and anything
subject to wear
3
& Verified Answers | 100% Correct |
Grade A (2026/2027)
This MA 2A Hoisting Exam consists of approximately 108 common questions
designed to test your knowledge of safety regulations, equipment operation, and
Massachusetts General Laws. Key topics include 520 CMR 6.00 (Hoisting
Machinery Regulations) and MGL Chapter 146 Sections 53-54A.
Study guide for the 2025–2027 exams
Topic Question Correct Answer
Regulatory What governs hoisting 520 CMR 6.00 and MGL Chapter
Authority machinery in MA? 146 Section 53.
How soon must a death be
Safety Incident Within 1 hour of the incident.
reported?
How should you carry a Keep it 12-18 inches off the
Load Handling
load? ground for visibility and stability.
Equipment When can hydraulic hoses Never while they are under
Check be tightened? pressure.
Perform a "pick test": lift the load
How do you test load
Load Brakes about 1 foot and hold for one
brakes?
minute.
How close to a marked
You must hand dig within 18
Trench Safety utility can you dig with a
inches of a marked utility.
machine?
Essential Exam Categories
• Safety Protocols: Includes Lock Out Tag Out (LOTO) for de-energized
circuits and mandatory seatbelt use.
1
, • Daily Inspections: Operators must check wire ropes, bearings, gears,
friction clutches, and brakes daily.
• License Limitations: A 2A license allows the operation of excavators,
backhoes, and loaders, but excludes class 1, 3, and 4 machinery.
• Penalties: Operating without a license can result in fines from $500 to
$3,000 and/or up to 3 months in jail
Quiz_________________?
What is the purpose of the 520:C.M.R.6:00 -
Answer
To establish rules and regulations for safety of the public
Quiz_________________?
What regulatory authority governs hoisting machinery -
Answer
520-C.M.R. 6:00 MGL chapter 146 section 53-54A
Quiz_________________?
What type of system is used when working on de-energized circuit -
Answer
Lock out tag out
Quiz_________________?
2
, In event of death, department of public safety must how soon -
Answer
Within 1 hour of incident
Quiz_________________?
When are reports of injury that required hospitalization or medical treatment
sent to the engineering section of department of public safety -
Answer
Immediately After the person has been treated
Quiz_________________?
All welding and cutting on hoisting equipment must be done in accordance with
requirements of what -
Answer
American society of mechanical engineering (ASME)
Quiz_________________?
What items should be checked on daily inspection -
Answer
Wire ropes, bearings, gears, friction clutches, brakes, chain drives and anything
subject to wear
3
