Texas Asbestos Abatement Supervisor
Licensing EXAM STUDY GUIDE 2026/2027
ACCURATE QUESTIONS WITH CORRECT
DETAILED SOLUTIONS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. What is the primary goal of the Texas Asbestos Health Protection Rules
(TAHPR)? - ANSWER ✔ To minimize public exposure to airborne
asbestos fibers, which are known to cause cancer.
2. What is the minimum percentage of asbestos that defines Asbestos-
Containing Material (ACM) in public buildings? - ANSWER ✔ 1.0% or
more.
3. Which types of buildings are generally exempt from TAHPR regulations? -
ANSWER ✔ Single private residences and apartment buildings with four
or fewer units.
4. What is the role of an Asbestos Abatement Worker? - ANSWER ✔ To
perform the actual removal or enclosure of asbestos under supervision.
5. What is the responsibility of an Asbestos Consultant? - ANSWER ✔ To
design the project, prepare specifications, and represent the building owner's
interests.
6. What is the function of an Air Monitoring Technician (AMT)? - ANSWER
✔ To collect air samples to ensure fiber levels stay within safe limits.
,7. What must be done before any demolition or renovation begins? - ANSWER
✔ A licensed inspector must conduct a survey to identify all suspect
asbestos materials.
8. What is the minimum number of samples an inspector must collect from a
'suspect homogeneous area'? - ANSWER ✔ At least three samples.
9. What are 'critical barriers' in asbestos abatement? - ANSWER ✔
Impermeable plastic sheeting (usually 6-mil) used to seal all openings like
windows, doors, and vents.
10.Why is negative air pressure used in an asbestos work area? - ANSWER ✔
To ensure air only flows into the work area and prevent fibers from
escaping.
11.What is the purpose of the three-room decontamination system? - ANSWER
✔ To allow workers to clean themselves before leaving the regulated area.
12.What is the demolition stop date for structurally unsound buildings
containing RACM? - ANSWER ✔ The date that load-bearing structural
components are removed and RACM is containerized or removed from the
site.
13.What is the term of a renewal license or registration? - ANSWER ✔ Two
years after the date the previous license or registration expires.
14.How long is a license or registration identification card valid? - ANSWER
✔ Until the license or registration expires or is revoked.
15.Can a licensed asbestos consultant act as the asbestos abatement contractor
on the same project? - ANSWER ✔ No, they must not act in both
capacities on the same project.
16.Can a licensed asbestos management planner act as the abatement contractor
for a project where they performed the survey? - ANSWER ✔ No.
17.Can a person be the responsible person for two companies that hold the same
type of license? - ANSWER ✔ No.
,18.What is the maximum size of a glove bag for removing asbestos-containing
TSI under SSSD activities? - ANSWER ✔ A single, standard 60 inches by
60 inches glove bag.
19.What is the primary purpose of the SDS format update? - ANSWER ✔ To
reflect the adoption of the United Nations' Globally Harmonized System of
Classification and Labeling of Chemicals.
20.What is the asbestos abatement stop date for the removal of resilient floor-
covering material? - ANSWER ✔ The date that the ACBM is removed
from the substrate and properly containerized.
21.What is the definition of 'ACBM' (Asbestos-containing building material)
under TAHPR §296.21(2)? - ANSWER ✔ ACBM is Surfacing, TSI, or
miscellaneous ACM that is found in, or on interior structural members or
other parts of, a public or commercial building.
22.Under TAHPR §296.21(7), if visible emissions are observed coming from
an ACM, that material has not been _____. - ANSWER ✔ adequately wet
23.What is the full title for the licensed individual abbreviated as AMT/PM? -
ANSWER ✔ Asbestos Air Monitoring Technician Project Monitor.
24.An AMT/PM must have _____ from a licensed asbestos consultant to
perform their duties. - ANSWER ✔ written delegated authority
25.An AMT/PM must be employed by what type of entity? - ANSWER ✔ A
licensed asbestos consultant agency.
26.What three general duties fall under the scope of permitted activities for an
AMT/PM? - ANSWER ✔ Project Air Monitoring, Project Monitoring, and
Consultant Support.
27.To obtain an initial AMT/PM license, an applicant must complete which two
initial training courses? - ANSWER ✔ The Asbestos Air Monitoring
Technician course and the Asbestos Contractor/Supervisor course.
, 28.What does ACM stand for? - ANSWER ✔ Asbestos Containing Material
(>1% asbestos)
29.What percentage defines ACM? - ANSWER ✔ 1%
30.What is friable asbestos? - ANSWER ✔ Material that can be crumbled by
hand pressure
31.Why is friable asbestos dangerous? - ANSWER ✔ It releases fibers easily
into the air
32.What does PACM stand for? - ANSWER ✔ Presumed Asbestos
Containing Material
33.What is a homogeneous area? - ANSWER ✔ Area with uniform material
throughout
34.What regulation covers schools? - ANSWER ✔ AHERA
35.What regulation covers demolition and renovation? - ANSWER ✔
NESHAP
36.What regulation covers worker safety? - ANSWER ✔ OSHA
37.What Texas agency regulates asbestos? - ANSWER ✔ Texas Department
of State Health Services (DSHS)
38.What is TSI? - ANSWER ✔ Thermal System Insulation (pipes, boilers,
ducts)
39.Give examples of surfacing material - ANSWER ✔ Spray-applied
fireproofing, acoustical plaster
40.Give examples of miscellaneous materials - ANSWER ✔ Floor tile, ceiling
tile, roofing
41.What must be done before demolition? - ANSWER ✔ Asbestos inspection
(NESHAP)
Licensing EXAM STUDY GUIDE 2026/2027
ACCURATE QUESTIONS WITH CORRECT
DETAILED SOLUTIONS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. What is the primary goal of the Texas Asbestos Health Protection Rules
(TAHPR)? - ANSWER ✔ To minimize public exposure to airborne
asbestos fibers, which are known to cause cancer.
2. What is the minimum percentage of asbestos that defines Asbestos-
Containing Material (ACM) in public buildings? - ANSWER ✔ 1.0% or
more.
3. Which types of buildings are generally exempt from TAHPR regulations? -
ANSWER ✔ Single private residences and apartment buildings with four
or fewer units.
4. What is the role of an Asbestos Abatement Worker? - ANSWER ✔ To
perform the actual removal or enclosure of asbestos under supervision.
5. What is the responsibility of an Asbestos Consultant? - ANSWER ✔ To
design the project, prepare specifications, and represent the building owner's
interests.
6. What is the function of an Air Monitoring Technician (AMT)? - ANSWER
✔ To collect air samples to ensure fiber levels stay within safe limits.
,7. What must be done before any demolition or renovation begins? - ANSWER
✔ A licensed inspector must conduct a survey to identify all suspect
asbestos materials.
8. What is the minimum number of samples an inspector must collect from a
'suspect homogeneous area'? - ANSWER ✔ At least three samples.
9. What are 'critical barriers' in asbestos abatement? - ANSWER ✔
Impermeable plastic sheeting (usually 6-mil) used to seal all openings like
windows, doors, and vents.
10.Why is negative air pressure used in an asbestos work area? - ANSWER ✔
To ensure air only flows into the work area and prevent fibers from
escaping.
11.What is the purpose of the three-room decontamination system? - ANSWER
✔ To allow workers to clean themselves before leaving the regulated area.
12.What is the demolition stop date for structurally unsound buildings
containing RACM? - ANSWER ✔ The date that load-bearing structural
components are removed and RACM is containerized or removed from the
site.
13.What is the term of a renewal license or registration? - ANSWER ✔ Two
years after the date the previous license or registration expires.
14.How long is a license or registration identification card valid? - ANSWER
✔ Until the license or registration expires or is revoked.
15.Can a licensed asbestos consultant act as the asbestos abatement contractor
on the same project? - ANSWER ✔ No, they must not act in both
capacities on the same project.
16.Can a licensed asbestos management planner act as the abatement contractor
for a project where they performed the survey? - ANSWER ✔ No.
17.Can a person be the responsible person for two companies that hold the same
type of license? - ANSWER ✔ No.
,18.What is the maximum size of a glove bag for removing asbestos-containing
TSI under SSSD activities? - ANSWER ✔ A single, standard 60 inches by
60 inches glove bag.
19.What is the primary purpose of the SDS format update? - ANSWER ✔ To
reflect the adoption of the United Nations' Globally Harmonized System of
Classification and Labeling of Chemicals.
20.What is the asbestos abatement stop date for the removal of resilient floor-
covering material? - ANSWER ✔ The date that the ACBM is removed
from the substrate and properly containerized.
21.What is the definition of 'ACBM' (Asbestos-containing building material)
under TAHPR §296.21(2)? - ANSWER ✔ ACBM is Surfacing, TSI, or
miscellaneous ACM that is found in, or on interior structural members or
other parts of, a public or commercial building.
22.Under TAHPR §296.21(7), if visible emissions are observed coming from
an ACM, that material has not been _____. - ANSWER ✔ adequately wet
23.What is the full title for the licensed individual abbreviated as AMT/PM? -
ANSWER ✔ Asbestos Air Monitoring Technician Project Monitor.
24.An AMT/PM must have _____ from a licensed asbestos consultant to
perform their duties. - ANSWER ✔ written delegated authority
25.An AMT/PM must be employed by what type of entity? - ANSWER ✔ A
licensed asbestos consultant agency.
26.What three general duties fall under the scope of permitted activities for an
AMT/PM? - ANSWER ✔ Project Air Monitoring, Project Monitoring, and
Consultant Support.
27.To obtain an initial AMT/PM license, an applicant must complete which two
initial training courses? - ANSWER ✔ The Asbestos Air Monitoring
Technician course and the Asbestos Contractor/Supervisor course.
, 28.What does ACM stand for? - ANSWER ✔ Asbestos Containing Material
(>1% asbestos)
29.What percentage defines ACM? - ANSWER ✔ 1%
30.What is friable asbestos? - ANSWER ✔ Material that can be crumbled by
hand pressure
31.Why is friable asbestos dangerous? - ANSWER ✔ It releases fibers easily
into the air
32.What does PACM stand for? - ANSWER ✔ Presumed Asbestos
Containing Material
33.What is a homogeneous area? - ANSWER ✔ Area with uniform material
throughout
34.What regulation covers schools? - ANSWER ✔ AHERA
35.What regulation covers demolition and renovation? - ANSWER ✔
NESHAP
36.What regulation covers worker safety? - ANSWER ✔ OSHA
37.What Texas agency regulates asbestos? - ANSWER ✔ Texas Department
of State Health Services (DSHS)
38.What is TSI? - ANSWER ✔ Thermal System Insulation (pipes, boilers,
ducts)
39.Give examples of surfacing material - ANSWER ✔ Spray-applied
fireproofing, acoustical plaster
40.Give examples of miscellaneous materials - ANSWER ✔ Floor tile, ceiling
tile, roofing
41.What must be done before demolition? - ANSWER ✔ Asbestos inspection
(NESHAP)
