FINAL ELEVATOR FINAL TEST 2026
QUESTIONS WITH CORRECT
ANSWERS GRADED A+
◍ Baleful.
Answer: threatening harm; having a harmful or destructive effect
◍ A Latching relay: Used for call registration,direction selection or as selector
relaysTwo types are: Set/Rest are electrical and Mechanical Latching relays
Need to know latching relay symbol, Its a box with shaded triangle in lower
right hand corner..
Answer: Which relay do you need to Order710 Pg, 7
◍ Maximum.
Answer: As great or intense as possible or permitted
◍ Capacity.
Answer: The maximum amount that something can contain
◍ Fluorescent.
Answer: strikingly bright, vivid or glowing
◍ Mechanism.
Answer: a system of parts working together in a machine
◍ Exhaustion.
Answer: extreme weakness or tiredness
◍ trembling.
Answer: to shake with quick short movements
◍ RPM = 60 ∙ ƒ ÷ P÷2 =Step 1. 60 x Frequency (Hz.) = Step 2. Poles ÷ 2
=Take answer 1 and ÷ by answer 2 =.
Answer: Know the formula for RPM435 Pg. 5
,◍ If you are referring to a megohm meter, it is a test of the insulation
properties of such things as electric wiring, motor windings and high power
antenna mounts. We use a "megger" or "meg out" electrical wiring and
equipment to see if it is shorted to ground or the frame in any way. The
megger uses much higher voltages to check resistance than a normal
Volt-ohm meter. Minimum resistance is 1 Meg Ohm.
Answer: Know what a Megger is and what it does636 Pg. 13
◍ haltingly.
Answer: stopping often because of not being sure what to say or do
◍ (1) A parallel connection. (2) A resistive element placed across the terminals
of an armature to bypass a portion of the current. (3) A flexible electrical
conductor designed to conduct current around the mechanical joint between
two conductors. (4) The resistive element (Usually of very low resistance)
used in parallel with a DC ammeter movement to bypass a calibrated portion
of the total circuit current..
Answer: Shunt Overloads425 All Pages
◍ Cubicle.
Answer: a work space with a desk that is surrounded by low walls
◍ Ominous.
Answer: indicating the nature of a future event for good or evil
◍ threadbare.
Answer: (adj.) shabby, old and worn
◍ sparse.
Answer: thinly dispersed or scattered
◍ timid.
Answer: shy
◍ Bad Ground.
Answer: You are using a Temp Run Box and you get shocked! Why!520 Pg.
4
, ◍ The bridle hitch can consist of two,three, or four single hitches (fig. 3-22),
used together to form a bridle hitch for hoisting an objectA sling with two
legs used to lift a 1,000 pound object will have 500 pounds of the load on
each leg when the sling angle is 90 degrees. The load stress on each leg
increases as the angle decreases; and if the sling angle was 30 degrees lifting
the same 1,000 pound object, the load will be 1,000 pounds on each leg. Try
to keep all sling angles greater than 45 degrees; sling angles approaching 30
degrees are considered extremely hazardous and must be avoided at all cost..
Answer: Bridal Hitch128 Pg 17
◍ peculiar.
Answer: strange or odd; unusual
◍ intimate.
Answer: marked by close acquaintance
◍ Scaffolding should be tied to the structure using#9 wire or tie-in devices.
The first vertical tieshould be at the maximum height of 4 times
thenarrowest base dimension. Additional ties are notto exceed 26' vertically.
Maximum horizontaldistance between ties is not to exceed 30'..
Answer: Scaffolding, You have 32' of rise, you are using 3x5 scaffolding.
Where will the tie off points be ?140 PG. 287-288
◍ Counterweights (Typically) are hung to counter balance the weight of the
car PLUS 40% of Capacity Load..
Answer: How much should Counterweight way?240 Pg. 14
◍ Note: We do not use wire smaller than #20 in travelling cables and #24
outside travelers.Largest wires are feeders to Hoist /Pump motorWe always
have 10 % spares10% of 52 = 5.2On a calculator Multiply the percent 10 by
the number you have and ÷ by 10010 X 52 ÷ 100 = 5.2.
Answer: Pulling Spare Wires (Example) 10% of 52 Wires515 Pg.26
◍ The correct lube must be used on chains..
Answer: The freight door motor is spinning but the door wont move,
Why?535 Pg. 9
QUESTIONS WITH CORRECT
ANSWERS GRADED A+
◍ Baleful.
Answer: threatening harm; having a harmful or destructive effect
◍ A Latching relay: Used for call registration,direction selection or as selector
relaysTwo types are: Set/Rest are electrical and Mechanical Latching relays
Need to know latching relay symbol, Its a box with shaded triangle in lower
right hand corner..
Answer: Which relay do you need to Order710 Pg, 7
◍ Maximum.
Answer: As great or intense as possible or permitted
◍ Capacity.
Answer: The maximum amount that something can contain
◍ Fluorescent.
Answer: strikingly bright, vivid or glowing
◍ Mechanism.
Answer: a system of parts working together in a machine
◍ Exhaustion.
Answer: extreme weakness or tiredness
◍ trembling.
Answer: to shake with quick short movements
◍ RPM = 60 ∙ ƒ ÷ P÷2 =Step 1. 60 x Frequency (Hz.) = Step 2. Poles ÷ 2
=Take answer 1 and ÷ by answer 2 =.
Answer: Know the formula for RPM435 Pg. 5
,◍ If you are referring to a megohm meter, it is a test of the insulation
properties of such things as electric wiring, motor windings and high power
antenna mounts. We use a "megger" or "meg out" electrical wiring and
equipment to see if it is shorted to ground or the frame in any way. The
megger uses much higher voltages to check resistance than a normal
Volt-ohm meter. Minimum resistance is 1 Meg Ohm.
Answer: Know what a Megger is and what it does636 Pg. 13
◍ haltingly.
Answer: stopping often because of not being sure what to say or do
◍ (1) A parallel connection. (2) A resistive element placed across the terminals
of an armature to bypass a portion of the current. (3) A flexible electrical
conductor designed to conduct current around the mechanical joint between
two conductors. (4) The resistive element (Usually of very low resistance)
used in parallel with a DC ammeter movement to bypass a calibrated portion
of the total circuit current..
Answer: Shunt Overloads425 All Pages
◍ Cubicle.
Answer: a work space with a desk that is surrounded by low walls
◍ Ominous.
Answer: indicating the nature of a future event for good or evil
◍ threadbare.
Answer: (adj.) shabby, old and worn
◍ sparse.
Answer: thinly dispersed or scattered
◍ timid.
Answer: shy
◍ Bad Ground.
Answer: You are using a Temp Run Box and you get shocked! Why!520 Pg.
4
, ◍ The bridle hitch can consist of two,three, or four single hitches (fig. 3-22),
used together to form a bridle hitch for hoisting an objectA sling with two
legs used to lift a 1,000 pound object will have 500 pounds of the load on
each leg when the sling angle is 90 degrees. The load stress on each leg
increases as the angle decreases; and if the sling angle was 30 degrees lifting
the same 1,000 pound object, the load will be 1,000 pounds on each leg. Try
to keep all sling angles greater than 45 degrees; sling angles approaching 30
degrees are considered extremely hazardous and must be avoided at all cost..
Answer: Bridal Hitch128 Pg 17
◍ peculiar.
Answer: strange or odd; unusual
◍ intimate.
Answer: marked by close acquaintance
◍ Scaffolding should be tied to the structure using#9 wire or tie-in devices.
The first vertical tieshould be at the maximum height of 4 times
thenarrowest base dimension. Additional ties are notto exceed 26' vertically.
Maximum horizontaldistance between ties is not to exceed 30'..
Answer: Scaffolding, You have 32' of rise, you are using 3x5 scaffolding.
Where will the tie off points be ?140 PG. 287-288
◍ Counterweights (Typically) are hung to counter balance the weight of the
car PLUS 40% of Capacity Load..
Answer: How much should Counterweight way?240 Pg. 14
◍ Note: We do not use wire smaller than #20 in travelling cables and #24
outside travelers.Largest wires are feeders to Hoist /Pump motorWe always
have 10 % spares10% of 52 = 5.2On a calculator Multiply the percent 10 by
the number you have and ÷ by 10010 X 52 ÷ 100 = 5.2.
Answer: Pulling Spare Wires (Example) 10% of 52 Wires515 Pg.26
◍ The correct lube must be used on chains..
Answer: The freight door motor is spinning but the door wont move,
Why?535 Pg. 9
