TFM01 EXAM 2 2026 FINANCIAL MARKETS AND INSTRUMENTS PRACTICE SET ANSWERS FULL SOLUTION

TFM01 EXAM 2 2026 FINANCIAL MARKETS
AND INSTRUMENTS PRACTICE SET ANSWERS
FULL SOLUTION

◉ A rubber stamp may be used to supply the required information;
however, a stamped signature is prohibited. If a rubber stamp is
used, it shall produce an imprint __________________ all in boldface type
and capital letters and in the following sample format,_______..
Answer: -2 1/2 inches wide by one inch high,
-a stamped signature is prohibited


◉ After an installation has been completed, an installation label
must be affixed to the __________________. The signature of the licensee
on the label certifies that the system has been installed according to
law..
Answer: control head or panel of the fixed fire extinguisher system.


◉ Installation Labels for Fixed Extinguisher Systems: Labels must
be_______ inches in height and _____ inches in width and must be of
the gum label type. They must not be red in color.
Answer: -5
-4

,◉ Fixed Extinguisher Systems: Installation labels must contain only
the following information in the format of the label shown in
subsection (b) of this section: * identification of the manufacturer's
manual(s) used for installation. and.
Answer: * identification of the manufacturer's manual(s) used for
installation. and
*the inscription "DO NOT REMOVE BY ORDER OF THE STATE FIRE
MARSHAL--SYSTEM INSTALLATION RECORD" (all in capital letters,
at least 10-point boldface type);
*the firm's name, address, and telephone number;
*the firm's certificate-of-registration number;
*the signature and license number of the licensee authorized to
certify a fixed fire extinguishing system (a stamped signature is
prohibited); the date of installation


◉ After completion of the installation, modification, or addition of a
fixed fire extinguisher system, the licensee must complete an
installation certificate in the format provided by the state fire
marshal (see Certificate of Installation). When an installation
certificate has been completed, legible copies must be distributed as
follows:.
Answer: *original to owner or posted on site at control head or
panel;
* a copy to main authority having jurisdiction, if required; and
*a copy to certifying firm to retain in their office for access by SFMO.

, ◉ After any service, a service tag must be completed in detail,
indicating all work that has been done, and then _______________ and
not hamper its actuation or operation.
Answer: attached to the portable or fixed system in such a position
as to permit convenient inspection


◉ Service Tags : The signature of the licensee on the________ that the
service performed complies with requirements of law..
Answer: Service tag certifies


◉ Service tags must bear the following information in the format of
the tag shown in subsection (g) of this section :(1).
Answer: *"DO NOT REMOVE BY ORDER OF THE STATE FIRE
MARSHAL" (all capital letters, at least 10-point boldface type)
*service performed;
*name and address of owner or occupant; and
*extinguisher type, size, and location
*firm's name, address, and telephone number;
*firm's certificate-of-registration number;
*licensee's name and license number;
*licensee's signature (a stamped signature is prohibited);
*month and year (to be punched);