NEC Article 625, 690 & 705 Advanced Certification Exam | Electric
Vehicle Supply Equipment (EVSE) Design & Compliance , Continuous
Load & 125% Overcurrent Protection Sizing , Cord Length
Limitations & Cable Management Systems , Coupling Height
Requirements & Equipment Grounding for Wireless Charging ,
Interactive vs Non-Interactive Systems , Anti-Backfeed Protection ,
PV Module Construction, Listing & Rapid Shutdown (12-Inch
Boundary Rule) , Wind Energy System Components (Generators,
Alternators, Inverters) , Energy Storage Systems (ESS)
Disconnecting Means & 50-Foot Rule , Parallel Power Production
Integration , Qualified Person Installation Standards , Receptacle &
Wiring Methods for EVSE , Grounding, Bonding & Safety Controls
Exam Questions Verified and Provided with Complete A+ Graded
Answers Latest Updated 2026
Overcurrent protection for feeders and branch circuits supplying EVSE shall be sized for ___.
continuous duty
The overall usable length of the cable for cord-connected EVSEs is not to exceed 25 feet unless
the listed electric vehicle supply equipment is equipped with a ___.
cable management system
Wind electrical systems include components such as ___.
generators
alternators
, inverters
Only ___ are permitted to perform construction, maintenance, and interconnection
requirements for wind electric systems found in the NEC®.
qualified persons
A complete, environmentally protected unit consisting of solar cells and other components
designed to produce DC power is known as a PV ___.
module
PV Modules intended for use in PV systems shall be ___ or be evaluated for the application
and have a field label applied.
listed
As it relates to the rapid shutdown of a PV system, the term array boundary is defined as ___
inches from the array in all directions.
12
Installation of electrical power production sources operating in parallel with a primary
source(s) of electricity shall be performed ___ by qualified persons.
only
Vehicle Supply Equipment (EVSE) Design & Compliance , Continuous
Load & 125% Overcurrent Protection Sizing , Cord Length
Limitations & Cable Management Systems , Coupling Height
Requirements & Equipment Grounding for Wireless Charging ,
Interactive vs Non-Interactive Systems , Anti-Backfeed Protection ,
PV Module Construction, Listing & Rapid Shutdown (12-Inch
Boundary Rule) , Wind Energy System Components (Generators,
Alternators, Inverters) , Energy Storage Systems (ESS)
Disconnecting Means & 50-Foot Rule , Parallel Power Production
Integration , Qualified Person Installation Standards , Receptacle &
Wiring Methods for EVSE , Grounding, Bonding & Safety Controls
Exam Questions Verified and Provided with Complete A+ Graded
Answers Latest Updated 2026
Overcurrent protection for feeders and branch circuits supplying EVSE shall be sized for ___.
continuous duty
The overall usable length of the cable for cord-connected EVSEs is not to exceed 25 feet unless
the listed electric vehicle supply equipment is equipped with a ___.
cable management system
Wind electrical systems include components such as ___.
generators
alternators
, inverters
Only ___ are permitted to perform construction, maintenance, and interconnection
requirements for wind electric systems found in the NEC®.
qualified persons
A complete, environmentally protected unit consisting of solar cells and other components
designed to produce DC power is known as a PV ___.
module
PV Modules intended for use in PV systems shall be ___ or be evaluated for the application
and have a field label applied.
listed
As it relates to the rapid shutdown of a PV system, the term array boundary is defined as ___
inches from the array in all directions.
12
Installation of electrical power production sources operating in parallel with a primary
source(s) of electricity shall be performed ___ by qualified persons.
only
