CSIA FINAL EXAM VERSION 1 ACTUAL EXAM
AND PRACTICE QUESTIONS AND SOLUTIONS|
CURRENTLY TESTING VERSION | ALREADY
GRADED A+|EXPERT VERIFIED FOR
GUARANTEED PASS 2026-2027
Fireplace performance problems can be broken down into four broad categories. These are
inadequate flow, inadequate
draft, flow reversals due to pressure issues, and:
A) wind induced downdrafts
B) chimney liner material
C) high pressure in the home
D) size of the home
A) wind induced downdrafts
The first step when servicing a pellet stoves is to:
A) inspect the flue
B) Remove the firepot
c) empty the hopper
D) disconnect it from the power source
D) disconnect it from the power source
1|Page
,Type B vent is used for venting:
A) pellet stoves
B) oil burning appliances
C) category I gas burning appliances
D) category ill gas burning appliances
C) category I gas burning appliances
The ideal moisture content for wood is:
A) 15%-20%
B) 15%-25%
C) 10%-15%
D) 17%-22%
B) 15%-25%
The technician should wear a respirator AND full body protective clothing when working in
an environment where histoplasmosis could exist. An example of this type of environment
is:
A) when sweeping a metal factory built chimney
B) when raccoon droppings are present
C) when the droppings of birds and bats are disturbed
D) when third degree creosote is present
C) when the droppings of birds and bats are disturbed
2|Page
,What is the third stage in the combustion process of solid fuel?
A) char burning
B) moisture evaporation
C) gas vapor ignition and combustion
D) vaporization of hydrocarbons
C) gas vapor ignition and combustion
Fireplaces in tight homes often experience performance problems that are related to:
A) their large flow requirements
B) excessive combustion air
C) their small flow requirements
D) strong draft
A) their large flow requirements
When sweeping a chimney, the appropriate filter for your respirator must be capable of
filtering what substances at a
minimum?
A) all volatile organic compounds
B) dust and organic vapors
C) dust and soot
D) vapors from all chemicals commonly applied to chimneys
B) dust and organic vapors
3|Page
, Instances where a Level II inspection is specifically recommended include:
A) after a home inspection is completed
B) upon changing of tenants renting a property
c) in the event of changing the glass doors in a masonry fireplace
D) upon sale or transfer of the property
D) upon sale or transfer of the property
The National Fuel Gas Code is:
A) NFPA 31
B) NFPA 54
C) NFPA 211
D) NFPA 921
B) NFPA 54
For a free standing wood burning stove, any floor protection or hearth extension should
extend at least ___ inches beyond the appliance on all sides, unless otherwise listed.
A) 6
B) 12
C) 18
D) 24
C) 18
4|Page
AND PRACTICE QUESTIONS AND SOLUTIONS|
CURRENTLY TESTING VERSION | ALREADY
GRADED A+|EXPERT VERIFIED FOR
GUARANTEED PASS 2026-2027
Fireplace performance problems can be broken down into four broad categories. These are
inadequate flow, inadequate
draft, flow reversals due to pressure issues, and:
A) wind induced downdrafts
B) chimney liner material
C) high pressure in the home
D) size of the home
A) wind induced downdrafts
The first step when servicing a pellet stoves is to:
A) inspect the flue
B) Remove the firepot
c) empty the hopper
D) disconnect it from the power source
D) disconnect it from the power source
1|Page
,Type B vent is used for venting:
A) pellet stoves
B) oil burning appliances
C) category I gas burning appliances
D) category ill gas burning appliances
C) category I gas burning appliances
The ideal moisture content for wood is:
A) 15%-20%
B) 15%-25%
C) 10%-15%
D) 17%-22%
B) 15%-25%
The technician should wear a respirator AND full body protective clothing when working in
an environment where histoplasmosis could exist. An example of this type of environment
is:
A) when sweeping a metal factory built chimney
B) when raccoon droppings are present
C) when the droppings of birds and bats are disturbed
D) when third degree creosote is present
C) when the droppings of birds and bats are disturbed
2|Page
,What is the third stage in the combustion process of solid fuel?
A) char burning
B) moisture evaporation
C) gas vapor ignition and combustion
D) vaporization of hydrocarbons
C) gas vapor ignition and combustion
Fireplaces in tight homes often experience performance problems that are related to:
A) their large flow requirements
B) excessive combustion air
C) their small flow requirements
D) strong draft
A) their large flow requirements
When sweeping a chimney, the appropriate filter for your respirator must be capable of
filtering what substances at a
minimum?
A) all volatile organic compounds
B) dust and organic vapors
C) dust and soot
D) vapors from all chemicals commonly applied to chimneys
B) dust and organic vapors
3|Page
, Instances where a Level II inspection is specifically recommended include:
A) after a home inspection is completed
B) upon changing of tenants renting a property
c) in the event of changing the glass doors in a masonry fireplace
D) upon sale or transfer of the property
D) upon sale or transfer of the property
The National Fuel Gas Code is:
A) NFPA 31
B) NFPA 54
C) NFPA 211
D) NFPA 921
B) NFPA 54
For a free standing wood burning stove, any floor protection or hearth extension should
extend at least ___ inches beyond the appliance on all sides, unless otherwise listed.
A) 6
B) 12
C) 18
D) 24
C) 18
4|Page
