Page 1 of 123
Texas Commission on Fire Protection (TCFP) Fire
Inspector II Exam ACTUAL EXAM COMPLETE
QUESTIONS AND CORRECT ANSWERS LATEST
UPDATE THIS YEAR
Texas Commission on Fire Protection (TCFP) Fire Inspector II Exam
EXAM COVERAGE OVERVIEW
The TCFP Fire Inspector II exam is a 60-minute certification test that covers advanced inspection
concepts beyond Inspector I level . Key content areas include:
• Plan Review & Construction Documents – Blueprint reading, elevation/sectional views,
partition schedules
• Fire Protection Systems – Sprinkler systems (NFPA 13, 13R, 13D), standpipe classes, kitchen
hood systems (NFPA 17A, 96)
• Building Construction & Occupancy – Construction types (I-V), occupancy classifications,
occupant load calculations
• Means of Egress – Travel distance, door requirements, panic hardware (NFPA 101)
• Water Supply & Fire Flow – Hydrant testing, static/residual pressure, color coding (NFPA 291)
• Hazardous Materials – MAQ, flammable/combustible liquids classifications, cryogenics
• Code Enforcement – Cease and desist orders, notices of violation
• Fire Behavior – Fire growth dynamics, flame spread index, smoke-developed ratings
Prerequisites : Must hold IFSAC Inspector I seal before qualifying for Inspector II certification .
1. When evaluating a set of structural plans, which type of specialized drawing illustrates the vertical
view of a building, showing floor-to-ceiling heights and exterior finishes?
A) Plot plan
B) Floor plan
, Page 2 of 123
C) Elevation view
D) Sectional view
Answer: C
Rationale: Elevation views provide a scaled vertical representation of the building's exterior or interior
walls, essential for determining height and area limitations under the IBC .
2. During a fire flow test, the pressure recorded at a hydrant when no water is flowing is known as:
A) Residual pressure
B) Static pressure
C) Flow pressure
D) Velocity pressure
Answer: B
Rationale: Static pressure represents the energy in the system when no water is moving. It is the starting
point for calculating pressure drop during fire-fighting flows .
3. According to NFPA 13, which type of sprinkler system is used in environments where the piping is
filled with air under pressure and water is held back by a valve until a sprinkler head melts?
A) Wet pipe system
, Page 3 of 123
B) Preaction system
C) Deluge system
D) Dry pipe system
Answer: D
Rationale: Dry pipe systems are specifically designed for unheated spaces (like parking garages) to
prevent water from freezing in the pipes before a fire occurs .
4. A liquid that has a flash point at or above 100°F (38°C) and below 140°F (60°C) is classified by the IFC
as a:
A) Class I Flammable Liquid
B) Class II Combustible Liquid
C) Class IIIA Combustible Liquid
D) Class IB Flammable Liquid
Answer: B
Rationale: The IFC distinguishes between flammable (flash point <100°F) and combustible (flash point
≥100°F). Class II represents the first tier of combustible liquids .
, Page 4 of 123
5. In a large commons area of a school, what is the maximum travel distance allowed to an exit in a
building equipped throughout with an approved automatic sprinkler system?
A) 150 feet
B) 200 feet
C) 250 feet
D) 300 feet
Answer: C
Rationale: The IBC allows a maximum travel distance of 250 feet for sprinklered buildings, compared to
200 feet for non-sprinklered .
6. What is the minimum required width for an accessible route door opening, measured with the door
open at 90 degrees?
A) 28 inches
B) 30 inches
C) 32 inches
D) 36 inches
Answer: C
Texas Commission on Fire Protection (TCFP) Fire
Inspector II Exam ACTUAL EXAM COMPLETE
QUESTIONS AND CORRECT ANSWERS LATEST
UPDATE THIS YEAR
Texas Commission on Fire Protection (TCFP) Fire Inspector II Exam
EXAM COVERAGE OVERVIEW
The TCFP Fire Inspector II exam is a 60-minute certification test that covers advanced inspection
concepts beyond Inspector I level . Key content areas include:
• Plan Review & Construction Documents – Blueprint reading, elevation/sectional views,
partition schedules
• Fire Protection Systems – Sprinkler systems (NFPA 13, 13R, 13D), standpipe classes, kitchen
hood systems (NFPA 17A, 96)
• Building Construction & Occupancy – Construction types (I-V), occupancy classifications,
occupant load calculations
• Means of Egress – Travel distance, door requirements, panic hardware (NFPA 101)
• Water Supply & Fire Flow – Hydrant testing, static/residual pressure, color coding (NFPA 291)
• Hazardous Materials – MAQ, flammable/combustible liquids classifications, cryogenics
• Code Enforcement – Cease and desist orders, notices of violation
• Fire Behavior – Fire growth dynamics, flame spread index, smoke-developed ratings
Prerequisites : Must hold IFSAC Inspector I seal before qualifying for Inspector II certification .
1. When evaluating a set of structural plans, which type of specialized drawing illustrates the vertical
view of a building, showing floor-to-ceiling heights and exterior finishes?
A) Plot plan
B) Floor plan
, Page 2 of 123
C) Elevation view
D) Sectional view
Answer: C
Rationale: Elevation views provide a scaled vertical representation of the building's exterior or interior
walls, essential for determining height and area limitations under the IBC .
2. During a fire flow test, the pressure recorded at a hydrant when no water is flowing is known as:
A) Residual pressure
B) Static pressure
C) Flow pressure
D) Velocity pressure
Answer: B
Rationale: Static pressure represents the energy in the system when no water is moving. It is the starting
point for calculating pressure drop during fire-fighting flows .
3. According to NFPA 13, which type of sprinkler system is used in environments where the piping is
filled with air under pressure and water is held back by a valve until a sprinkler head melts?
A) Wet pipe system
, Page 3 of 123
B) Preaction system
C) Deluge system
D) Dry pipe system
Answer: D
Rationale: Dry pipe systems are specifically designed for unheated spaces (like parking garages) to
prevent water from freezing in the pipes before a fire occurs .
4. A liquid that has a flash point at or above 100°F (38°C) and below 140°F (60°C) is classified by the IFC
as a:
A) Class I Flammable Liquid
B) Class II Combustible Liquid
C) Class IIIA Combustible Liquid
D) Class IB Flammable Liquid
Answer: B
Rationale: The IFC distinguishes between flammable (flash point <100°F) and combustible (flash point
≥100°F). Class II represents the first tier of combustible liquids .
, Page 4 of 123
5. In a large commons area of a school, what is the maximum travel distance allowed to an exit in a
building equipped throughout with an approved automatic sprinkler system?
A) 150 feet
B) 200 feet
C) 250 feet
D) 300 feet
Answer: C
Rationale: The IBC allows a maximum travel distance of 250 feet for sprinklered buildings, compared to
200 feet for non-sprinklered .
6. What is the minimum required width for an accessible route door opening, measured with the door
open at 90 degrees?
A) 28 inches
B) 30 inches
C) 32 inches
D) 36 inches
Answer: C
