DETAILED ACCURATE ANSWERS GRADED A+
What type of knot would a rigger use to connect the ends of
two ropes of the same diameter?
Square
3 multiple choice options
An aluminum pipe is 16 ft long, 4 ft in diameter, and 3/4 inch
thick. Calculate the weight of the pipe.
2,110 lbs
3 multiple choice options
Based on the runs (r1 = 14") and (r2 = 27") labled below and a
load weight of 12,000 lbs. , calculate the approximate share of
load weight at x and y.
7,902 lbs at x; 4,098 lbs at y
3 multiple choice options
The osha cfr 29 standard relating to slings is:
1910.184
3 multiple choice options
, A 4-legged chain sling bridles working load limit is based on
how many of the slings legs?
Only two
3 multiple choice options
What way should a wire rope clips be applied when making an
eye?
Place the u-bolt on the dead end
3 multiple choice options
A screw pin anchor shackle with a 3.25 t wll is side-loaded to
90 degrees. What is the shackle capacity when used in this
configuration?
1.625 t
3 multiple choice options
A wood object weighs 45,000 lbs. And rests on a level
concrete surface. Calculate the force needed to move the
wood object.
20,250 lbs
3 multiple choice options