Carpentry Comprehensive Resource To Help You Ace 2026-
2027 Exams Includes Frequently Tested Questions With
ELABORATED 100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf
1. The location of a residential home as it should be constructed on the building site is
specified on the ____ plan.
a) floor
b) plot
c) plat
d) framing - Correct Answer: plot
2. Which of the following floor framing members supports the heaviest load of attached
horizontal members?
a) joists
b) ledger strips
c) lintels
d) girders - Correct Answer: girders
3. What is the standard height for an interior door for residential homes?
a) 7 feet
b) 7 feet 2 inches
c) 6 feet
d) 6 feet 8 inches - Correct Answer: 6 feet 8 inches
4. The term used to describe the inside of a door opening during the framing stage and
prior to the unit installation is:
a) Net opening
b) door opening
, c) rough opening
d) trimmer dimensions - Correct Answer: Rough opening
5. What is used to position a leveling instrument directly over a given point during
surveying or foundation construction?
a) benchmark
b) plumb bob
c) laser level
d) point indicator - Correct Answer: plumb bob
6. Which of the following is a common squaring method used to ensure an angle is 90
degrees?
a) 2-3-6
b) 2-4-6
c) 3-4-5
d) 6-8-9 - Correct Answer: 3-4-5
7. When joists are parallel to a component, such as in a shower or garden tub, the joists
should be:
a) doubled
b) blocked
c) braced
d) engineered - Correct Answer: doubled
8. A common field test to verify a rectangular building is properly square at each corner is
to:
a) Make sure the width and length are the same
b) Check the corners with a building square
c) Measure the diagonal corners, and if they are equal, the building is square
9. d)Check at least one corner using the 3,4,5 system - Correct Answer: Measure the
diagonal corners, and if they are equal, the building is square
10. What are the three members of a balustrade?
, a) Newels, handrails, and balusters
b) Treads, risers, and handrails
c) Stringers, handrails, and newels
d) Balusters, handrails, and risers - Correct Answer: Newels, handrails, and
balusters
11. What type of saw is used to shape the mitered edges of molding?
a) Hack
b) Coping
c) Jig
d) Skill - Correct Answer: coping
12. What type of saw blade is used for cutting a groove in wood?
a) Dado
b) Flat
c) Cross-cut
d) Kerf - Correct Answer: dado
13. The point at which contractors and surveyors begin an excavation is the ___________.
a) level
b) datum
c) hub
d) bench mark - Correct Answer: bench mark
14. Batter boards are typically placed ___________________________.
a) at the very edge of the foundation lines
b) 2 feet beyond the edge of the foundation lines
c) 4 feet beyond the edge of the foundation lines
d) inside the edge of the foundation lines - Correct Answer: 4 feet beyond the
edge of the foundation lines
15. What size header would be required for a 36" door in a typical wood frame construction
application?
2027 Exams Includes Frequently Tested Questions With
ELABORATED 100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf
1. The location of a residential home as it should be constructed on the building site is
specified on the ____ plan.
a) floor
b) plot
c) plat
d) framing - Correct Answer: plot
2. Which of the following floor framing members supports the heaviest load of attached
horizontal members?
a) joists
b) ledger strips
c) lintels
d) girders - Correct Answer: girders
3. What is the standard height for an interior door for residential homes?
a) 7 feet
b) 7 feet 2 inches
c) 6 feet
d) 6 feet 8 inches - Correct Answer: 6 feet 8 inches
4. The term used to describe the inside of a door opening during the framing stage and
prior to the unit installation is:
a) Net opening
b) door opening
, c) rough opening
d) trimmer dimensions - Correct Answer: Rough opening
5. What is used to position a leveling instrument directly over a given point during
surveying or foundation construction?
a) benchmark
b) plumb bob
c) laser level
d) point indicator - Correct Answer: plumb bob
6. Which of the following is a common squaring method used to ensure an angle is 90
degrees?
a) 2-3-6
b) 2-4-6
c) 3-4-5
d) 6-8-9 - Correct Answer: 3-4-5
7. When joists are parallel to a component, such as in a shower or garden tub, the joists
should be:
a) doubled
b) blocked
c) braced
d) engineered - Correct Answer: doubled
8. A common field test to verify a rectangular building is properly square at each corner is
to:
a) Make sure the width and length are the same
b) Check the corners with a building square
c) Measure the diagonal corners, and if they are equal, the building is square
9. d)Check at least one corner using the 3,4,5 system - Correct Answer: Measure the
diagonal corners, and if they are equal, the building is square
10. What are the three members of a balustrade?
, a) Newels, handrails, and balusters
b) Treads, risers, and handrails
c) Stringers, handrails, and newels
d) Balusters, handrails, and risers - Correct Answer: Newels, handrails, and
balusters
11. What type of saw is used to shape the mitered edges of molding?
a) Hack
b) Coping
c) Jig
d) Skill - Correct Answer: coping
12. What type of saw blade is used for cutting a groove in wood?
a) Dado
b) Flat
c) Cross-cut
d) Kerf - Correct Answer: dado
13. The point at which contractors and surveyors begin an excavation is the ___________.
a) level
b) datum
c) hub
d) bench mark - Correct Answer: bench mark
14. Batter boards are typically placed ___________________________.
a) at the very edge of the foundation lines
b) 2 feet beyond the edge of the foundation lines
c) 4 feet beyond the edge of the foundation lines
d) inside the edge of the foundation lines - Correct Answer: 4 feet beyond the
edge of the foundation lines
15. What size header would be required for a 36" door in a typical wood frame construction
application?
